How many points are deducted for being photographed while driving and making a phone call?

What is the reason why the car does not respond when the remote key is pressed?

The reasons why the car does not respond when the remote key is pressed are as follows: 1. The remote key battery is dead: If you find that the remote key does not respond when unlocking or locking the car, and you observe that the small light on the key does not flash, it is very likely that the battery inside the key is dead and needs to be replaced. 2. There is too much interference in the parking area: Due to strong radio interference, the signal from the remote key cannot be successfully received by the vehicle. In this case, you should move the vehicle to a more distant location and then try the key's function again. 3. Interference devices and criminals lurking nearby: Many criminals often use a type of interference device to "emit" electromagnetic waves of the same frequency band to actively interfere with the signal sent by the remote key. At this time, pressing the remote key will not produce any response. If the owner does not pay attention to the lock signal after pressing the lock button, or does not pull the door handle to confirm, this gives those criminals lurking nearby an opportunity to take advantage of the situation.

17

5

Share

How Much Horsepower Does the H2R Have?

h2r has 300 horsepower. Here are the specific details about the H2R: 1. The H2R is a motorcycle under Kawasaki, equipped with a 998cc four-cylinder, four-stroke supercharged engine. This engine can deliver maximum power at 14,000 RPM. 2. The H2R cannot be registered for road use; this motorcycle is designed exclusively for track racing. 3. The supercharger system increases the engine's air intake without enlarging its displacement. Many high-end car engines also utilize supercharging technology, while others employ turbocharging to enhance engine performance.

3

4

Share

Is Wheel Balancing Necessary After Rotating Car Tires?

It is essential to perform wheel balancing after rotating front and rear tires on a car. The specific reasons are as follows: 1. A car's wheel is an integrated unit composed of the tire and rim. However, due to manufacturing variances, the mass distribution across this unit cannot be perfectly uniform. 2. When car wheels rotate at high speeds, this creates dynamic imbalance, resulting in phenomena such as wheel wobbling and steering wheel vibration during driving. 3. To prevent this phenomenon or correct existing imbalance, counterweights must be added to the wheel under dynamic conditions to achieve balanced correction across all edges. This correction process is what we commonly refer to as wheel balancing.

13

5

Share

Which country does Dunlop belong to?

Dunlop was founded in Japan. Here is relevant information: 1. A Japanese tire brand, under the Sumitomo Group, originally established in Japan by the British Dunlop Company. During World War II, due to Japan's declaration of war against Britain, Dunlop Rubber Factory was also taken over by Japan's staunch right-wing Sumitomo Group. 2. Dunlop was the first among similar products to apply to tram, train, and trolleybus seat cushions. The aviation industry also saw the widespread use of latex in cockpit and passenger seats. The British Dunlop mattress (dunlopillo) is a world-class bedding brand with a long history, sold in 76 countries globally and highly favored by consumers worldwide.

11

4

Share

Where is the air filter of BMW 730?

BMW 730 air filter location varies depending on the model. Here is the introduction for BMW 730: 1. The air filter of the old BMW 730 is located under the wiper in the engine compartment. 2. The air filter of the new BMW 730 is located in the glove box on the passenger side. Extended information: 1. Take the BMW modified 730 as an example. It is a 4-door, 4-seater large sedan with a body size of 5273 mm in length, 1902 mm in width, 1498 mm in height, and a wheelbase of 3210 mm. 2. The BMW modified 730 is equipped with a 4.4t twin-turbocharged engine, with a maximum power of 390 kW and a maximum torque of 750 Nm. The driving method is front four-wheel drive. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.

11

4

Share

How to Determine the Condition of a Compressor?

To determine whether an air conditioning compressor is functioning properly, follow these steps: 1. First, learn to identify the three terminals on the compressor, labeled S, R, and C. S stands for the start winding, R for the run winding, and C for the common terminal. 2. Next, use a multimeter to measure the resistance between these terminals. The sum of the resistances between SC and RC should equal the resistance between RS, which indicates normal operation. For example, if the resistance between RC is 5 ohms and between SC is 3.5 ohms, then the resistance between RS should be 8.5 ohms (minor deviations are acceptable, but significant differences are not). If the resistances deviate too much or there is no resistance between any of the terminals, the compressor is likely damaged.

13

1

Share

How many points are deducted for being photographed while driving and making a phone call?

What is the reason why the car does not respond when the remote key is pressed?

How Much Horsepower Does the H2R Have?

Is Wheel Balancing Necessary After Rotating Car Tires?

Which country does Dunlop belong to?

Where is the air filter of BMW 730?

How to Determine the Condition of a Compressor?

What does SN0W20 engine oil mean?

Can 92 gasoline be replaced with 95?

Which Factory Produces the Emgrand?

How far can a Hyundai Verna run when the fuel gauge flashes?