···
Log in / Register

How many points are deducted for answering phone calls while driving?

5 Answers
MalachiLynn
07/23/2025, 11:26 AM

Using a phone while driving results in a penalty of 2 points and a fine. Legal basis for the penalty: According to the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle while engaging in behaviors that hinder safe driving, such as making or answering handheld phone calls, will result in a deduction of 2 points per violation. Phone calls distract drivers: The main danger of using a phone while driving is not the inability to hold the steering wheel with both hands, but rather the distraction it causes, significantly impairing the driver's reaction time. Under normal driving conditions, the average reaction time to an emergency is 0.57 seconds. However, when a driver uses a phone while driving, this reaction time increases to 2.12 seconds—nearly four times longer. This clearly demonstrates that phone use severely reduces a driver's reaction capability.

Was this review help?
20
4
Share
StSamuel
08/10/2025, 07:21 AM

Answering phone calls while driving is something you really need to be careful about. Using a phone while driving is a common violation and can easily be caught by surveillance cameras or stopped by the police. It results in a 2-point deduction and a fine starting from 200 yuan. I learned this the hard way when I took a work call in a hurry last time and got caught, leading to point deductions and a time-consuming, costly process. The dangers of distracted driving are significant, with statistics showing that rear-end accidents caused by phone calls have increased several times over. It's advisable to develop a habit of setting up a Bluetooth device in your car and finding a safe place to pull over for emergency calls instead of taking the risk for momentary convenience. Remember, safety comes first by following traffic rules, so you don’t end up having to retake your driving test if your points run low during the next inspection. This lesson was profound for me, and now I always use hands-free or voice control in the car.

Was this review help?
4
0
Share
Expand All
DiAvery
09/22/2025, 01:13 AM

From a professional perspective, making or receiving calls on a handheld phone while driving is illegal. According to traffic regulations, it results in a 2-point deduction and a 200-yuan fine. This rule is strictly enforced to prevent the fatal risks of distracted driving, such as delayed reaction times and attention diversion. Drivers should familiarize themselves with the relevant penalty standards and consider using Bluetooth headsets or in-car communication systems to avoid violations. In terms of safety, data shows a high proportion of accidents caused by phone usage, so don't take chances. During routine maintenance, you can also check if your devices are in good condition to ensure compliance. It's essential to stay updated on regulation changes to protect yourself and others.

Was this review help?
1
2
Share
Expand All
DiVera
11/05/2025, 03:32 AM

The biggest issue with using a phone while driving is the safety hazard. When your mind is on the phone, your attention drifts, and the accident rate soars. In terms of penalty points, violating this rule results in a deduction of 2 points and a fine of 200. I've seen too many cases where friends got into accidents because of this, affecting their insurance. It's advisable to switch to a Bluetooth device or pull over to handle calls. Developing good habits is crucial—don't let small oversights lead to major mistakes. Stay focused on driving to ensure everyone's safety.

Was this review help?
4
4
Share
Expand All
StKai
12/26/2025, 05:21 AM

Using a phone while driving will definitely result in penalty points. A single offense is 2 points plus a 200 yuan fine. I got caught when I was younger and felt the punishment was quite severe, not to mention the hassle of going to the processing point. Nowadays, we teach new drivers to use Bluetooth headsets or car systems, or simply pull over to talk. Don't underestimate the safety risks—statistics show this behavior increases the likelihood of accidents. Regularly check your devices to stay compliant, and don't take shortcuts that put you at risk. Driving license points are valuable, and following the rules benefits everyone.

Was this review help?
2
2
Share
Expand All
More Forum Discussions

Should I Use High and Low Beams When Overtaking on the Highway at Night?

When overtaking, you should switch from high beams to low beams in advance and turn on the turn signal to inform the vehicle ahead of your position and intention. When the distance to the vehicle ahead is less than 80-100 meters, you should switch back to low beams. Otherwise, the strong glare from your high beams may affect the driver's view through the side and rearview mirrors, compromising their ability to observe the situation behind and indirectly reducing the safety of the overtaking maneuver. Additionally, you can use the high beams of the vehicle ahead to observe the road further ahead. In foggy conditions with visibility less than 200 meters, turn on the fog lights, low beams, marker lights, and front and rear position lights. If visibility drops below 100 meters, activate the fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. When visibility is less than 50 meters, turn on the fog lights, low beams, marker lights, front and rear position lights, and hazard warning flashers. Additionally, reduce your speed to no more than 20 kilometers per hour and exit the highway at the nearest available exit as soon as possible. During normal driving at night, use the nighttime running lights and width indicator lights. If there are no vehicles ahead, you may briefly switch to high beams to observe the road and surroundings further ahead, then quickly switch back to low beams.
11
3
Share

What are the symptoms of a faulty car air conditioning temperature sensor?

Car air conditioning temperature sensor failure can cause the air conditioning compressor to malfunction, affecting the air conditioning regulation capability, leading to erratic operation of the air conditioning system. Below is relevant information about automotive air conditioning: 1. Introduction to Automotive Air Conditioning: Automotive air conditioning consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, forming an air conditioning system that regulates the temperature and humidity inside the vehicle to provide a comfortable environment for the driver. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy and turn into a liquid. The liquid refrigerant flows through the throttle device, where its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator, causing it to evaporate and turn into a gas. The gas is then drawn into the compressor for the next cycle.
1
3
Share

How to reset the brake pads on a Mercedes-Benz GLC200?

Open the driver's side door. 2. Press the brake pedal to prepare for starting the engine. 3. Press the car's one-key start button to start the engine. 4. The car's dashboard lights up, and the entire vehicle's power is connected. 5. Press the brake pad reset button located next to the gear lever, and the operation is complete. 1. When the brake pads wear down to the warning position [the brake pads are equipped with a metal piece for warning purposes; when the brake pads wear thin, the metal piece produces abnormal noise, indicating the need for replacement. In most cases, simply replacing the new brake pads will reset it. Under normal usage conditions, the replacement cycle for brake pads is usually around fifty to sixty thousand kilometers. In the vast majority of cases, we use whether the brake warning light on the dashboard lights up as the basis for determining whether to replace the brake pads, but this is already the last line of defense. Although all vehicles basically have such a warning system, some directly sense the thickness of the brake pads, while others only light up the warning light when the brake pads are completely worn out and the brake fluid is extremely low. Therefore, during every maintenance visit, it is essential to check whether the brake pads are still usable and replace those nearing the end of their lifespan in advance, rather than solely relying on the warning light.
20
4
Share

How to set the automatic downward tilt of the rearview mirror when reversing in Haval M6?

Start the car, shift into reverse gear, adjust the downward tilt angle of the right rearview mirror, then press the SET button on the seat memory. A sound will indicate successful setup. When the vehicle is in reverse gear, the right rearview mirror will automatically adjust its angle downward to help the driver see the ground. The mirror automatically adjusts during reversing to improve visibility and resets when driving forward, which is a very user-friendly design. To set the memory, shift into reverse gear and hold the seat memory button on the driver's left side until you hear a sound, indicating successful memory. Only the right rearview mirror has this function. Press the right button on the rearview mirror, and it will automatically tilt down during reversing. For the left mirror adjustment, turn to R, and the right mirror will automatically tilt down. First shift into reverse gear, adjust the right mirror to the desired position, then exit reverse gear. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, sides, and below the car while seated in the driver's seat. For the convenience of the driver and to prevent traffic safety accidents and ensure personal safety, all countries require cars to be equipped with rearview mirrors, and all mirrors must be adjustable.
8
0
Share

What does 'lim' mean on the car dashboard?

The 'lim' on a car indicates that the speed limit function is activated. When the vehicle is stationary, pressing it once will default the speed limit to 30. While driving, pressing it once will record the current speed as the trigger point for the speed limit. There are two methods to activate it: 1. When the vehicle is stationary, pressing it once will default the speed limit to 30. 2. While driving, pressing it once will record the current speed as the trigger point for the speed limit. For example, when driving on a road with a speed limit of 60, pressing it once when the speed is between 58-65 will set the limit. If the vehicle speed exceeds this value, a warning will appear on the dashboard. Pressing LIM once more will deactivate the function.
12
3
Share

What are the items tested in the small road driving test?

Subject 2, also known as the small road driving test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. The test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. The following is supplementary information: According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), the content of the Subject 2 test includes: for large buses, tractors, city buses, medium-sized buses, and large trucks, the test items are pile driving, stopping and starting on a slope, parallel parking, passing a single-plank bridge, driving on a curve, turning at a right angle, passing a width-limited gate, passing continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulating highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling; for small cars, small automatic transmission cars, small automatic transmission cars specially designed for the disabled, and low-speed trucks, the test items are reversing into a garage, stopping and starting on a slope, parallel parking, driving on a curve, and turning at a right angle.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.