How many points are deducted and how much is the fine for driving in a bus lane?

1 Answers
DiAnna
07/29/25 2:28am
Driving in a bus lane will result in a deduction of 2 points. Illegally occupying a bus lane violates the provisions of the Road Traffic Safety Law: motor vehicles driving not in accordance with the prescribed lane will be penalized with 2 points deducted from the driver's license and a fine of 200 yuan, which must be paid within 15 days. Precautions: 1. Be aware of the permitted access time: Understand the permitted access time for bus lanes. Many bus lanes are dedicated to buses during peak hours, while other vehicles can enter during non-peak hours. Be clear about the time slots dedicated to buses to avoid entering. 2. Familiarize yourself with the road: Familiarize yourself with the road in advance. If you are not familiar with the local roads, carefully identify road signs or follow taxis, which generally do not make mistakes. 3. Avoid being forced to yield the lane: Inexperienced drivers may be forced into the bus lane by other vehicles, so novice drivers should pay attention. When being forced, you can slow down and yield, but never give up the lane.
Was this review help?
16
4
Share
More Forum Discussions

What are the reasons for the throttle lag in Iveco vehicles while driving?

Below are the specific reasons for throttle lag in Iveco vehicles while driving: 1. Carbon buildup issues: Including cylinder carbon buildup, throttle carbon buildup, spark plug carbon buildup, and intake carbon buildup. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power and sluggish idle performance. 2. Fuel system: Adding incompatible fuel grades can result in decreased vehicle output power and reduced performance. Alternatively, blockages in the fuel tank vent, fuel tank switch, fuel filter, or fuel lines between the tank and carburetor can restrict fuel supply, leading to a lean air-fuel mixture and weak engine acceleration. 3. Intake system: If the air filter is clogged due to prolonged use without timely cleaning, insufficient air intake will cause an overly rich air-fuel mixture, reducing engine power. For vehicles equipped with turbochargers, any malfunction in the turbocharging system can also lead to decreased engine power or sluggish performance. 4. Engine overheating: Insufficient engine oil, low engine coolant levels, or malfunctioning engine cooling systems can increase engine load, leading to poor heat dissipation. Engine overheating reduces lubrication effectiveness, increases mechanical wear, lowers engine power, and raises fuel consumption.
16
0
Share

What does current speed mean?

Current speed refers to the actual speed of the vehicle at the present moment, which is slightly lower than the value displayed on the speedometer. Here are the relevant explanations: 1. Concept of speed: Vehicle speed refers to the distance traveled by a vehicle per unit time, commonly referred to as speed, with common units being kilometers/hour or meters/second. 2. Speed introduction: Vehicle speed is one of the three parameters used to describe traffic flow and holds significant importance in traffic flow theory research. Vehicle speed can also generally refer to motor vehicle speed. To suit different purposes, vehicle speed is mainly categorized into spot speed, segment speed, and design speed. 3. Classification of speed: (1) For a specified location, the average value of speed observations taken at different times over a period is called the time mean speed. (2) For a specified moment, the average value of speeds taken at different locations over a segment of the journey is called the space mean speed.
16
5
Share

What could be the reason for the fuel gauge not responding after refueling a BMW X5?

If the fuel gauge of a BMW X5 does not respond after refueling, it might be due to a stuck fuel float. Try shaking the car body slightly; if the issue persists, further troubleshooting at a 4S shop is recommended. Below is some relevant information about the BMW X5: 1. Overview: The BMW X5 is the brand's first four-wheel-drive SUV model, launched in the US at the end of 1999. It has a wheelbase of 2975mm, a weight of 2200 kg, a top speed of 243 km/h, and features front-engine four-wheel drive with a displacement of either 2.0L or 3.0L. 2. Features: The X5 offers ample space, with spacious, snug, and comfortable front seats and abundant storage compartments inside the cabin. It boasts excellent handling, a stable and well-built chassis, and precise steering response during high-speed cornering, making it extremely steady at high speeds. The suspension performs well on various road surfaces. It has sufficient power, with a responsive and linear engine performance, though fuel consumption is relatively high.
5
2
Share

Where is the Elantra tire pressure set button located?

The set button for the Elantra is located on the center console, which serves as the button for the tire pressure monitoring system. The tire pressure monitoring technology used in vehicles can provide real-time monitoring of tire conditions by recording tire rotation speeds or through electronic sensors installed inside the tires, ensuring driving safety. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the tire pressure monitoring system will continue to display the previous data, causing the tire pressure monitoring indicator to light up. Simply resetting the tire pressure will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, such as by hitting a curb, it will trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.
2
4
Share

What are the main symptoms of a damaged engine cylinder head?

Cylinder head, commonly referred to as the cylinder cover, is a part of the engine, specifically the engine cylinder head. The main manifestations of a damaged engine cylinder head are as follows: 1. While driving, you often feel the engine is underpowered and has difficulty accelerating. There may be air leakage sounds at the joint between the cylinder head and the cylinder block or in localized areas. 2. After starting the engine, one or two cylinders may not work, producing a "bang, bang" sound. The radiator continuously loses water, bubbles emerge from the radiator filler neck, or oil droplets appear on the surface of the coolant. 3. When checking the engine oil with the dipstick, the oil appears milky white. Water droplets continuously flow out of the exhaust pipe. 4. The engine coolant temperature is too high. When the cylinder head gasket is severely damaged, not only does the engine power drop significantly, but sometimes it may even fail to start. Generally, when such faults occur, replacing the cylinder head is sufficient, and the engine oil should also be changed at the same time.
11
4
Share

Why is there no air coming out of the BMW 5 Series air conditioner?

BMW 5 Series air conditioner not blowing air is mainly due to faults in the blower motor, air filter, or control system. Here are the relevant details: 1. Solutions: You can determine if there is a fault by turning the car air conditioner's fan speed and air volume to the maximum and listening for the sound of the blower motor. If the air filter is faulty, it can be resolved by replacing the filter. If neither of these faults is the cause, then the issue lies with the air conditioner control system, which requires inspection and repair at an auto repair shop. 2. Clogged air filter: A clogged air filter is the most common reason for the air conditioner not blowing air. Outside air passes through the air filter to enter the car, and it also traps many airborne particles, making it prone to clogging. You can remove the air filter; if it is not very dirty, use an air gun to clear the debris and then reinstall it to check if the air vent issue is resolved.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.