How many OBD ports does the BMW X1 have?

1 Answers
VanJackson
07/30/25 1:22am
The BMW X1 has only one OBD port, located under the dashboard on the driver's side. Function of OBD: OBD stands for On-Board Diagnostics. This system monitors the engine's electronic control system and other functional modules of the vehicle in real-time during operation. If any abnormal conditions are detected, it identifies specific faults based on predefined algorithms and stores them as diagnostic trouble codes in the system's memory. OBD Port Design: The OBD port is a 16-pin female connector with a trapezoidal shape. Some vehicle models have a protective cover over the OBD port. Common OBD port colors include black, white, or blue.
Was this review help?
15
2
Share
More Forum Discussions

What is the fuel consumption of the Benelli 752s?

The fuel consumption of the Benelli 752s is approximately 5 liters per 100 kilometers. Here is an extended introduction: 1. Factors affecting fuel consumption: There are many objective factors that can influence fuel consumption. For example, individual driving habits, usual road conditions, vehicle load, etc., can all significantly impact a car's fuel consumption. 2. Power: It is equipped with a twin-cylinder water-cooled electronic fuel injection engine, with a compression ratio of 11.5:1 and an actual displacement of 745cc. It is matched with a slipper clutch, with a maximum power of 56KW (76Ps)/8000rpm and a top speed of 200km/h. 3. Tires: The front tire model is 120/70-17, and the rear tire is 180/55-17. 4. Body dimensions: The wheelbase is 1460mm, the fuel tank capacity is 14.5L, the minimum ground clearance is 180mm, and the curb weight is 228kg.
19
3
Share

How many liters of engine oil does the Mercedes-Benz A200 require?

The Mercedes-Benz A200 requires approximately 6.1 liters of engine oil. Below is some relevant information about the Mercedes-Benz A200: 1. Engine oil specification: The vehicle uses SM-grade 5W30 fully synthetic engine oil. This model does not have a traditional dipstick; instead, the oil level is checked via the central display screen. After adding oil, start the vehicle and then turn it off. Wait for 3 minutes before checking the oil level. When changing the oil, it is also necessary to replace the oil filter. The new oil filter initially contains no oil, so starting the vehicle allows oil to flow into the filter. 2. Fuel consumption: Insufficient oil can lead to increased fuel consumption. Impact point: When the crankshaft journal moves to the bottom dead center, it may come into contact with the oil, creating resistance that affects normal operation. Conversely, too little oil is also problematic as it cannot provide sufficient lubrication, leading to accelerated wear of internal engine components and potential engine damage. Therefore, it is crucial to maintain the oil level within the specified range.
7
5
Share

How to Check Where a Vehicle Has Arrived with the VIN?

With the Vehicle Identification Number (VIN), you can use positioning software to check the current location of the vehicle. Below is relevant information about the VIN: 1. Definition: The Vehicle Identification Number, abbreviated as VIN, is a unique set of seventeen letters or numbers used on automobiles to identify the manufacturer, engine, chassis number, and other specifications. 2. Manufacturer: The first three digits of the VIN are known as the World Manufacturer Identifier (WMI), used to identify the manufacturer's name and country of origin. For manufacturers producing fewer than 500 vehicles annually, the third digit of the VIN will be a '9', and digits 12-14 will serve as the second part of the identification. 3. Plate Location: Except for trailers and motorcycles, the identification plate should be fixed on the door hinge pillar, door lock pillar, or one of the door edges adjacent to the door lock pillar, close to the driver's seat.
18
3
Share

Why Was the Toyota Prius Discontinued?

At that time, domestic production of the Prius was extremely limited, with only a few dozen units manufactured each month. Toyota was unwilling to use domestically produced hybrid core components, opting instead for imported parts, which significantly increased costs—nearly double that of conventional fuel-powered vehicles, approaching the price range of mid-level models. Factors such as low production volume, poor sales performance, lack of subsidies, and high pricing ultimately led to the discontinuation of the Prius. Below are some relevant details: 1. Vehicle Overview: The Toyota Prius, launched by Toyota Motor Corporation in 1997, was the world's first mass-produced hybrid vehicle. By 2001, it was sold in over 40 countries and regions, with Japan and North America being its largest markets. 2. Design Philosophy: Long before the energy crisis and environmental issues became prominent, Toyota had the foresight to incorporate hybrid technology into its long-term development plans. After dedicating over 40 years of effort, the Prius was the first to perfectly execute avant-garde design concepts with future-oriented craftsmanship and was ahead of its time in incorporating a series of highly intelligent technologies.
5
5
Share

Does the 2021 Emgrand have speaker wires in the rear doors?

The 2021 Emgrand does not have speaker wires in the rear doors. Here are the specific details: 1. Exterior: The Emgrand GL headlights feature a relatively refined design with simple outlines, and the detailed GL lights are very exquisite. The Emgrand GL has a solid body, with an overall weight of 3 tons, providing outer layer protective safety. The rear design gives a visually smooth and sleek impression, with a slender body, clear waistline, fashionable layering, and excellent three-dimensional visual effects. 2. Interior: The Emgrand GL trunk space is average, with a large enough window opening, though it's somewhat high, requiring some effort to lift items in. The rear seats can be folded down. 3. Engine: The 1.4T engine delivers a maximum of 170 horsepower, paired with a dual-clutch transmission for very spirited performance. The dual-zone automatic air conditioning allows independent temperature adjustment on both sides without interference, with knobs and buttons for easy and simple operation.
11
1
Share

What to Do If You Don't Know How to Open the Window When Sitting in a Car for the First Time?

Method to open the car window for first-time car passengers: Press the operation button on the door downward to open the window. Below is an introduction to various types of car windows: 1. Front and rear windshields: The front and rear windshields of a car usually use curved glass that is both aesthetically pleasing and provides good visibility. In sedans, the front and rear windshields are also known as the front and rear windshields. 2. Ventilation windows: To facilitate natural ventilation, some cars have triangular ventilation windows on the doors. These triangular windows can rotate around a vertical axis, with the front part turning inward and the rear part turning outward, creating a vortex of air that circulates around the window. 3. Heat-insulating side windows: Side windows are often tinted or have a heat-insulating layer to help maintain interior temperature and provide a quiet and comfortable feeling. High-end buses with complete air conditioning, heating, ventilation, and climate control systems often have side windows designed to be non-openable to enhance the vehicle's sealing.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.