How many more years can a China 4 vehicle be driven?

1 Answers
StWillow
07/25/25 4:17pm
As long as the vehicle is in good condition, a China 4 vehicle can be driven indefinitely. However, some cities may impose driving restrictions on China 4 vehicles. China has clear regulations that do not set a mandatory retirement period for private passenger vehicles, only stipulating guided retirement after reaching 600,000 kilometers. For light trucks and heavy trucks, the mandatory retirement period is 10 years, but it can be extended up to 5 years, meaning the maximum mandatory retirement period for China 4 trucks is 15 years. The China 4 emission standard was implemented starting from July 1, 2010, and the nationwide implementation of the China 5 standard began on July 1, 2017. Therefore, vehicles produced between 2011 and 2017 are generally China 4 emission standard compliant.
Was this review help?
8
4
Share
More Forum Discussions

How to Adjust When the Car Body is Not Straight During Curb Parking?

Practice makes perfect. Here are the adjustment methods for an unaligned car body during curb parking: Use the wiper to judge whether the car front is straight—no problem. By comparing the wiper with road markings, maintain a fixed distance or angle while driving. If it deviates, it indicates the car front is not straight. Additionally, depending on each person's height difference, other parts of the car front can also serve as reference points, such as the roof corner or reinforcement ribs. Actually, the most crucial point to ensure the car front is straight is to learn to look into the distance, observing distant traffic lights, the rear of the car ahead, lane markings, etc., to see if the car body is straight. When parking at the curb, after selecting the parking position, turn the steering wheel to the right. At this time, the steering angle should not be too large. When the center of the car front is about to align with the right edge line, immediately turn the steering wheel back to the left. The steering wheel turning range can be slightly larger at this point.
10
5
Share

What does a yellow light with an 'a' inside a circle on the dashboard mean?

The reason for a yellow light with an 'a' inside a circle appearing on the dashboard is that the engine auto start-stop system is active. At this time, the car often shuts off, and releasing the brake will automatically restart the engine, allowing normal driving to resume. The conditions for auto start-stop activation include: engine coolant temperature being too low after a cold start, typically below 70 degrees Celsius; outside temperature below 5 degrees Celsius, or cabin temperature below 20 degrees Celsius when heating is on; insufficient battery charge, usually below 60%; steering wheel angle exceeding 30 degrees; front seat belts not fastened; and parking on a slope. The auto start-stop function activates automatically each time the car is started, provided the above conditions are met, and the vehicle speed exceeds 3 km/h for about 4 seconds, without requiring any additional action from the driver. However, the auto start-stop function must be turned off in the following situations: during water wading; when driving on a slope (most cars are usually set to automatically disable it in this case); and when refueling, the engine must be completely turned off and power must be cut before refueling.
16
1
Share

What is the working principle of an evaporator?

The working principle of an automobile evaporator: The liquid refrigerant enters through the feed port, while the heating steam heats the heating tube bundle inside the heating chamber. The thicker tube in the middle of the heating chamber, due to its smaller heating area compared to the heating tube bundle, causes the refrigerant vaporized by the heating tube bundle to rise and enter the evaporation chamber. Below are related introductions: 1. Definition of the evaporator: The evaporator is a device used to heat the refrigerant and absorb heat from the external environment, mainly composed of a heating chamber and an evaporation chamber. 2. Application in thermal units: In fresh air heat exchange units and fan coil units, the evaporator primarily provides chilled water during the cooling process and heated refrigerant during the heating process. 3. Application in ground source heat pump systems: Its role in ground source heat pump systems is opposite to that of the condenser. During the heating process of the ground source heat pump unit, the evaporator acts as a ground source side device, heating the circulating water on the ground source side. The heated water is then transferred to the condenser through heat exchange in the unit, where the heat from the hot water is discharged by the condenser.
18
5
Share

What do 4L and 4H mean in 4WD vehicles?

4H and 4L are two modes available in four-wheel-drive vehicles. 4H stands for four-wheel-drive high-speed mode, while 4L stands for four-wheel-drive low-speed mode. These two drive modes have certain differences in controlling the transmission and are used in different scenarios. Properly utilizing the four-wheel-drive modes according to terrain can not only improve the vehicle's off-road capability but also reduce fuel consumption to some extent. Usage scenarios for 4H and 4L modes: 1. Slippery surfaces: If driving on snow or slippery roads, the 4H mode is very suitable, as it ensures sufficient drive wheels while avoiding excessive driving force that could cause wheel slip. 2. Climbing: Due to its strong driving force, the 4L mode can be used when climbing slopes or during off-road driving, maximizing the vehicle's power. 3. High-speed driving: High-speed four-wheel drive is not suitable for highway driving. For part-time four-wheel-drive vehicles, dry paved roads are not suitable for 4H or 4L modes; only the 2H mode should be selected.
11
3
Share

What documents are needed for car transfer?

The seller needs to prepare the original ID card of the vehicle owner, vehicle registration certificate, vehicle license, original purchase invoice or transfer invoice of the vehicle, and the buyer needs to provide the original ID card of the buyer. Some regions also require a "vehicle purchase quota". The procedures for car transfer are as follows: 1. Obtain the form: obtain and fill out a copy of the motor vehicle change, transfer, modification, suspension, or scrapping approval form. 2. Stamp: affix the same seal as the original registration, and private vehicles must submit the owner's ID card for verification. 3. Review: go to the vehicle management section of the traffic police detachment and submit the documents to the registration acceptance counter for review by the handling officer. 4. Inspection: vehicles that meet the transfer conditions will be sent to the motor vehicle inspection counter for inspection and confirmation. 5. Payment: after passing the inspection, for transfers or changes within the same county or city, go directly to the license plate management counter to wait for notification and pay the fee. 6. Tax payment: the transaction tax is issued by the used car trading center and is charged at 1.48% of the vehicle's estimated value.
2
2
Share

How to Transfer a Driver's License to Your Place of Residence?

Here is the relevant information for handling the transfer and renewal of a motor vehicle driver's license: 1. Required materials: (1) Original ID card and a copy, two one-inch color photos. (2) Proof of household registration transfer and transfer order from the labor and personnel department. (3) Submit the original driver's license and file for approval by the business leadership post. The clerk will unseal the file, review whether the file materials are complete and valid, and process the transfer after online verification. (4) Retain the "Motor Vehicle Driver's License Application Form," "Motor Vehicle Driver's License Registration Item Form," and "Motor Vehicle Driver Transfer Notice" from the original driver's license file. 2. Prerequisites: (1) Query the national public security traffic management information system to compare and confirm that the applicant's information and driver's license information are true and valid. (2) The motor vehicle driver does not have a situation where the driver's license has been revoked, canceled, or invalidated according to the law. (3) The motor vehicle driver's accumulated points have not reached the full score.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.