How many more years can a 2011 Passat be driven?

Why Does the Car Dashboard Get Scratched So Easily When Wiped?

The dashboard protective cover has a relatively soft texture, making it prone to scratches even without using hard objects. For minor scratches that are not too deep, you can purchase some mirror repair liquid or repair paste to apply. Apply the repair paste or liquid to the scratched area, applying multiple layers if necessary. Wait for about 10 minutes to allow the repair liquid or paste to penetrate the scratch. Then, use a lint-free cloth to wipe the scratched area back and forth (avoid circular motions) for about 5-10 minutes. Finally, clean the dashboard with a non-woven cloth. For deeper scratches, you can visit a 4S shop for waxing or polishing. If you're concerned about future scratches, you can ask the staff to apply a paint protection film (PPF). After applying the film, avoid wiping the dashboard for the first few days to prevent scratches. If the scratches are too severe to repair, you may need to purchase a matching protective cover for the dashboard. Otherwise, the entire dashboard assembly might need replacement, as 4S shops rarely replace just the protective cover. Reasons why car dashboards get scratched so easily: Drivers need to see the information displayed on the dashboard to understand the car's driving conditions, which requires the dashboard cover to have good light transmission. Therefore, dashboard covers are usually made of plastic or acrylic, materials with relatively low hardness. Even wiping with tissues or rough cloth can easily cause scratches.

10

2

Share

Will not wearing a seatbelt in the back seat be recorded in the file?

Not wearing a seatbelt in the back seat will not be recorded in the file. Regulations: According to Article 51 of the "Road Traffic Safety Law of the People's Republic of China": When a motor vehicle is in motion, the driver and passengers shall use seatbelts as required, and motorcycle drivers and passengers shall wear safety helmets as required. If the driver or passengers fail to use seatbelts as required, they shall be ordered to make corrections and may be given a warning or fined. Function of seatbelts: Seatbelts are an important safety device in vehicles to protect passengers. It is essential to wear seatbelts during travel, especially when driving on highways. Without seatbelts, passengers could be thrown out of the vehicle at high speeds.

3

Share

Can a Car with Ambient Lighting Pass the Annual Inspection?

Self-installed ambient lighting inside the car can pass the annual vehicle inspection. The installation of ambient lighting involves a lot of wiring, so it's best to have it done at a professional installation shop. This not only requires consideration of the circuit layout but also the load capacity. Definition of Ambient Lighting: Ambient lighting in a car is a decorative lighting fixture, usually in colors like red, blue, or green. Its main purpose is to make the car interior more vibrant at night, enhance the atmosphere, and create a certain mood. Function of Ambient Lighting: The biggest advantage is the enhancement of aesthetics. Since the appearance of the interior is already set, ambient lighting can be added to various parts of the interior. When turned on, it emits soft, naturally transitioning light on areas like the dashboard lines and door panels, making the interior look comfortable and creating a romantic ambiance.

16

2

Share

What car has an 'S' on the steering wheel?

An 'S' logo on the steering wheel indicates a Suzuki (SUZUKI) vehicle. The 'S' in the Suzuki trademark is the first capital letter of 'SUZUKI', conveying a sense of infinite power and symbolizing the limitless development of Suzuki Motor Corporation. History of Suzuki: Suzuki Corporation was founded in 1920 as a Japanese automobile manufacturer. It began producing motorcycles in 1952 and cars in 1955. Suzuki Motor Corporation (SUZUKI) was established in 1954, primarily manufacturing mini vehicles. Suzuki's Mission: Suzuki believes that its mission is to provide every customer with 'high-quality', 'high-performance', 'user-friendly', and 'comfortable cars'.

16

2

Share

Can halogen be converted to LED by just replacing the bulb?

Halogen cannot be converted to LED by just replacing the bulb; the entire headlight assembly needs to be replaced. Converting to LED lights is a systematic project. Although LED is a cold light source, it still generates heat during operation. Therefore, heat dissipation must be addressed when installing LED car lights. Hence, modifying LED headlights requires proper heat dissipation design and cannot be done by simply replacing the bulb. Directly replacing the LED bulb results in poorer performance: If you directly replace the LED light source without changing the lens and reflector bowl, the illumination range and angle will be altered, leading to reduced effectiveness. Neglecting heat dissipation affects safety: If you directly replace the LED light source without addressing heat dissipation, prolonged use of the LED light will cause it to degrade or even fail to light up. This can pose a serious safety risk during nighttime driving.

14

0

Share

Can Engine Bearing Wear Be Repaired?

If the engine bearing wear is not severe, it can still be repaired. There are many reasons for engine bearing wear. Poor quality of crankshaft and bearings: The surface finish of the journal and bearing is poor, especially for vehicles that have undergone major repairs and had their bearings replaced. If the grinding and scraping work during the major repair is not done meticulously, the fit between the shaft and bearing after installation will be poor, with insufficient contact area to form an oil film. Additionally, if there is a gap behind the bearing, the alloy and bearing cannot fully adhere tightly, leading to loosening and misalignment, which can block the oil hole and interrupt oil supply, resulting in dry friction. Incorrect installation of main and connecting rod bearings: Improper adjustment of clearance, whether too large or too small, can make it difficult to form an oil film on the contact surface between the shaft and bearing. Sometimes, if the tightening torque of the bearing bolts is too low, the bearings may loosen over time, causing changes in clearance and affecting lubrication. Severe gear wear: Severe wear and failure of the oil pump gears reduce the oil supply pressure, making it difficult to deliver oil to the designated lubrication points, resulting in dry friction of the bearings.

5

0

Share

How many more years can a 2011 Passat be driven?

Why Does the Car Dashboard Get Scratched So Easily When Wiped?

Will not wearing a seatbelt in the back seat be recorded in the file?

Can a Car with Ambient Lighting Pass the Annual Inspection?

What car has an 'S' on the steering wheel?

Can halogen be converted to LED by just replacing the bulb?

Can Engine Bearing Wear Be Repaired?

What Causes Steering Wheel Resistance?

What are the pros and cons of silent tires?

What is the reason why a car cannot reach 4000 RPM in neutral?

Is It Safe to Drive with a Liquefied Gas Tank?