···
Log in / Register

How Many Months Qualify as Inventory Vehicles?

1 Answers
VanDavid
09/07/25 7:14am
There is no standardized time point or definition for inventory vehicles. Normally, a vehicle goes through a certain period from production, assembly line completion, distribution by the general dealer, storage in the main warehouse, to final distribution. Typically, an inventory vehicle refers to one that has remained unsold in the main warehouse for over a year. Below is an introduction to inventory vehicles: Imported Inventory Vehicles: Parallel imported vehicles take up to 3 months to arrive at the port from the time they leave the factory overseas, depending on the factory location, such as the U.S., Canada, Europe, or the Middle East. However, delays in customs clearance at the port can extend this period. Therefore, imported models that have been in stock for more than 6 months since production are considered inventory vehicles. Methods to Identify Inventory Vehicles: The manufacturing date marked on the nameplate in the engine compartment indicates the actual inventory duration of the vehicle. Imported vehicles with an inventory time exceeding 6 months can be classified as inventory vehicles. Additionally, noticeable aging of parts like wipers, engine belts, or tires on imported vehicles also suggests they are inventory vehicles. Lastly, checking the battery by turning on high-beam headlights or other high-power electrical devices for about 10 minutes with the engine off can help determine if the battery is weak, indicating an inventory vehicle.
Was this review help?
7
3
Share
More Forum Discussions

What Causes a Mercedes-Benz AC to Not Cool When Turned On?

When a Mercedes-Benz AC is turned on but fails to cool, it could be due to insufficient refrigerant, leaks in the pipeline, or a faulty refrigerant pressure sensor. The specific reasons are as follows: Damaged Air Conditioning Flap: A damaged air conditioning flap is relatively rare. Located in the middle-lower part of the dashboard, if it is damaged, it must be replaced, though the replacement process is quite complicated. Dirty Condenser: When the condenser is too dirty, the AC's heat dissipation deteriorates, leading to poor cooling performance. Therefore, regular cleaning is necessary. Damaged AC Compressor, Throttle Valve, or Expansion Valve: The AC compressor is not easily damaged, but malfunctions in the throttle valve or expansion valve can cause poor AC performance. Diagnosing this issue is complex and requires a visit to a 4S shop for repair. Additionally, if the compressor drive belt is aged or loose, the refrigerant circulation—which relies on the compressor's moving parts—may be affected. A loose drive belt can cause the compressor to slip, so if the AC is not working properly, the engine belt should also be inspected.
4
3
Share

When will the China IV standard for diesel engines be implemented?

China IV emission standard for diesel engines was originally scheduled to be implemented on January 1, 2010. The China IV emission standard is introduced as follows: Pollutant emission standards: The China IV emission standard is the fourth-stage national standard for motor vehicle pollutant emissions. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). The China IV emission standard for diesel engines was originally scheduled to be implemented on January 1, 2010. For diesel vehicles over 3.5 tons, the China IV standard was postponed for two years, while for diesel vehicles under 3.5 tons, it was postponed for three years, with the China IV standard being implemented on July 1, 2013. Recirculation system: Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard aims to control and reduce vehicle pollutant emissions to below specified levels.
10
4
Share

GAC Trumpchi GS4 Tire Brands

GAC Trumpchi GS4's 1.3T model uses Maxxis tires, while the 1.5T model is equipped with Michelin tires, both with a tire size of 215/55R18. The Trumpchi GS4 is positioned as an international new-generation SUV. Below are detailed introductions to the two brands: 1. Maxxis Tires: The GAC Trumpchi GS4 luxury version uses Maxxis tires sized 215/55R18. The top-tier model comes with Continental MC5 series tires. Maxxis is one of the brands under the Chinese Taiwan-based Cheng Shin Rubber Industry Co., Ltd., established in 1967. 2. Michelin Tires: Equipped with Michelin PRImACY 3ST tires in the size 215/55R18, a set of tires that excel in both dry and wet grip performance. Paired with multi-spoke two-tone rims, the performance is outstanding, and the texture is excellent. The PRImACY 3ST has always been the representative of Michelin's quiet and comfortable tire lineup.
1
0
Share

What does Mercedes-Benz ESP mean?

Mercedes-Benz ESP stands for Electronic Stability Program, here are the relevant details: Introduction to ESP system: ESP is the Electronic Stability Program, a new active safety system in vehicles. It is an extension of the Anti-lock Braking System (ABS) and Traction Control System (TCS) functions. Additionally, it incorporates a yaw rate sensor, lateral acceleration sensor, and steering wheel angle sensor during vehicle cornering. The ECU controls the driving and braking forces of the front, rear, left, and right wheels to ensure lateral stability during vehicle operation. Common causes of ESP malfunction: Dirty throttle body requiring cleaning; faulty brake switch or wiring; issues in the intake system; use of substandard fuel.
2
0
Share

Where is the engine of SAIC Roewe i5 produced?

Roewe i5's engine is domestically produced. The i5 is equipped with two types of engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. More details about the Roewe i5's engines are as follows: 1. The 1.5-liter naturally aspirated engine has a maximum power of 88 kW, a maximum torque of 150 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4500 rpm. This engine is equipped with DVVT technology and uses an aluminum alloy cylinder head and cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT transmission. 2. The 1.5-liter turbocharged engine has a maximum power of 124 kW, a maximum torque of 250 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 1700 to 4300 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
6
5
Share

Is FAW Toyota a Joint Venture or Domestic Vehicle?

FAW Toyota is a joint venture vehicle. FAW Toyota is an automotive company jointly established by China's local automobile company and Japan's Toyota Motor Corporation. Therefore, the vehicles produced by FAW Toyota are joint venture vehicles and do not fall under the category of domestic vehicles. A small portion of FAW Toyota vehicles are imported. Below is more information about FAW Toyota: 1. FAW Toyota was established in 2006, and currently, the company has an annual production capacity of 420,000 vehicles, including models such as the Toyota Vios, Toyota Crown, and Toyota Reiz. 2. Currently, FAW Toyota has three production bases in China, located in Tianjin, Changchun (Jilin), and Chengdu (Sichuan). 3. FAW Toyota's main products include the IZOA, Vios, Corolla, Reiz, RAV4, Prado, and Land Cruiser. 4. The predecessor of Tianjin FAW Toyota Motor Co., Ltd. was Tianjin Toyota Motor Co., Ltd., established in 2000, which later became part of the FAW Group in 2002.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.