···
Log in / Register

How many milliliters of engine oil should be added to the UY125?

3 Answers
LaJasmine
07/29/25 6:07pm
When the engine oil is completely drained, the UY125 can be filled with 650ml of oil. However, it is generally difficult to achieve this, so adding approximately 600ml is sufficient in practice. Types of engine oil suitable for the UY125: According to the UY125 manual, you should purchase SG, SH, SJ, or SL grade 10W-40W four-stroke motorcycle engine oil. For most motorcycles, during the break-in period of a new bike, the first oil change is typically required between 500–1000 kilometers, followed by subsequent oil changes every 2000 kilometers. How to handle overfilling engine oil: You can use the pump mechanism from a shampoo or detergent bottle to remove excess oil. The oil level should remain within the range marked on the dipstick.
Was this review help?
13
0
Share
Judah
08/14/25 10:24am
I've been riding my Suzuki UY125 for several years. Every time I change the oil, I add about 700ml, usually fluctuating between 650ml to 750ml, depending on the manual's recommendation or actual drainage situation. If too little oil is added, the oil pressure will be insufficient, causing engine noise and accelerated wear; adding too much oil can easily increase oil temperature, leading to oil leaks from seals or increased fuel consumption. I prefer changing the oil when the engine is cold, letting the bike sit for an hour first, then unscrewing the oil pan bolt to drain the old oil, adding new oil, and finally checking the oil level with the dipstick to ensure it's in the middle of the marked lines. Although it's a simple task, getting the amount right makes the bike run smoother and avoids expensive engine repairs from breakdowns on the road.
Was this review help?
9
3
Share
Expand All
MacHeidi
10/14/25 4:18am
When adding engine oil to the UY125, I usually pour in about 650ml, and the upper limit should not exceed 750ml. As an ordinary car owner, I believe the most crucial thing is to change the oil regularly without delaying too long—every 3,000 kilometers or every six months. For beginners, first turn off the engine and let it cool for half an hour, then find a level ground to place an oil pan to catch the old oil. Before adding new oil, wipe the dipstick clean to check the level, keeping it in the middle range. Don’t skimp on oil quality either; choosing synthetic oil can extend the engine’s lifespan. This method is worry-free and safe, avoiding the danger of sudden engine shutdowns on the highway.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

Which car shares the same engine as the Haval H9?

Haval H9's engine is the same as that of the Haval H6, both equipped with the GW4C20 engine. The Haval H9 is a mid-to-large-sized SUV under Great Wall Motors. Taking the Haval H9 2020 4WD Premium 7-seater as an example, its body dimensions are: length 4856mm, width 1926mm, height 1900mm, wheelbase 2800mm, and fuel tank capacity 80L. The Haval H9 2020 4WD Premium 7-seater is powered by a 2.0T engine, with a maximum power of 165 kW, maximum torque of 385 Nm, and maximum power speed of 5500 rpm.
6
2
Share

How many liters of engine oil does the Volkswagen Touareg require?

The Volkswagen Touareg requires approximately 6.8 to 7.5 liters of engine oil, and the oil level should be maintained between the upper and lower marks on the dipstick. Taking the Volkswagen Touareg 2021 Pilot Special Edition as an example, its body dimensions are: length 4878mm, width 1984mm, height 1717mm, with a wheelbase of 2899mm. The Touareg 2021 Pilot Special Edition is equipped with a 2.0T 245 horsepower L4 turbocharged engine, with a maximum power of 180 kW, a maximum torque of 370 Nm, and a maximum power speed range of 5000 to 6500 rpm, paired with an 8-speed automatic transmission.
5
4
Share

Should the Nissan Patrol use 92 or 95 octane gasoline?

The Nissan Patrol uses 95 octane gasoline. The Patrol is an imported vehicle by Nissan. Taking the 2018 Patrol 4.0L XE Leadership Edition as an example, its body dimensions are: length 5165mm, width 1995mm, height 1955mm, with a wheelbase of 3075mm and a fuel tank capacity of 100 liters. The 2018 Patrol 4.0L XE Leadership Edition is equipped with a 4.0L naturally aspirated engine, producing a maximum torque of 394 Nm, maximum horsepower of 279, and maximum power of 205 kW. It is paired with a 7-speed automatic transmission, and its tire size is 265/70R18.
9
0
Share

Is the Wuling Hongguang in China a joint venture car?

China's Wuling Hongguang is not a joint venture car, but a domestic independent brand. The Wuling Hongguang is a microvan under SAIC-GM-Wuling. Taking the 2020 Wuling Hongguang as an example, its body dimensions are: length 4390mm, width 1660mm, height 1750mm, wheelbase 2720mm, and fuel tank capacity 50l. The 2020 Wuling Hongguang is equipped with a 1.2l naturally aspirated engine, paired with a 5-speed manual transmission, with a maximum power of 11 kilowatts, a maximum torque of 110 Newton meters, and a maximum torque speed of 3000 to 4000 revolutions per minute.
4
2
Share

Can a 2025 Battery Be Used in Place of a 2032 for Car Key?

A 2025 battery cannot be used in place of a 2032 for car keys. The nominal capacity of a 2025 battery ranges from 140 to 170mAh, while that of a 2032 battery ranges from 200 to 230mAh. The thickness of 2025 and 2032 batteries differs, resulting in varying amounts of active material and differing capacities. Car key batteries are primarily used for flashing lights or RF products and come in the form of coin cells, button cells, or watch batteries. The 2025 battery is commonly used in car keys, whereas the 2032 battery is typically found in computer motherboard CMOS batteries, which are used to record system time and maintain clock accuracy.
1
2
Share

What is an EGR Valve?

An EGR valve, also known as an Exhaust Gas Recirculation valve, is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculation in the intake system. It is a very important and critical component in the exhaust gas recirculation system. Its function is to regulate the amount of exhaust gas entering the intake manifold, allowing a certain amount of exhaust gas to flow into the intake manifold for recirculation. The EGR valve is typically located on the right side of the intake manifold, near the throttle body, and is connected to both the intake and exhaust manifolds. It controls the degree of valve opening through a vacuum tube, determining the amount of exhaust gas transmitted to the intake manifold. By directing the exhaust gas from engine combustion back into the intake manifold for re-burning, it helps lower the combustion chamber temperature, improve engine efficiency, enhance the combustion environment, reduce engine load, effectively decrease carbon monoxide emissions, minimize knocking, and extend the lifespan of various components.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.