How many meters away from the broken-down vehicle should the warning sign be placed on the highway?

1 Answers
NovaRose
07/25/25 12:40pm
On the highway, the warning sign for a broken-down vehicle should be placed at least 150 meters away from the vehicle in the direction of oncoming traffic. Introduction to safety warning signs: The warning sign is a standard emergency equipment on vehicles, usually in the shape of a triangle, hence also known as a triangular warning sign. The warning sign must strictly comply with the requirements of the "Road Traffic Safety Law" and be made of plastic reflective material as a passive reflector. The principle is that when a driver encounters a sudden traffic accident on the road, the reflective properties of the warning sign are used to alert other vehicles to avoid it, thereby preventing secondary accidents. The function of the safety warning sign: Generally, the triangular warning sign on the highway indicates that there is a vehicle breakdown or a traffic accident ahead, serving as a signal to remind following vehicles to slow down.
Was this review help?
18
4
Share
More Forum Discussions

What is the refrigerant charge amount for BMW X5?

BMW X5 refrigerant charge amount is 1000-1200 grams. Methods to determine if a car's air conditioning is low on refrigerant: Use a thermometer to measure the temperature difference between the indoor unit's air inlet and outlet. A difference of more than 8 degrees is considered normal, indicating better air conditioning performance (can reach about 15 degrees). If the difference is below 8 degrees, refrigerant may need to be added. Methods for adding refrigerant: Currently in the market, one can of refrigerant typically contains 220 grams or 250 grams. Mid-to-low end vehicle models require 3-4 cans, while high-end models need 4-6 cans. Each vehicle model has specified requirements - the car manual will indicate the required amount, or you can control the charge amount based on pressure gauge readings. Special charging machines can be set to automatic mode.
18
2
Share

What is the collaborative brand between Geely and Volvo?

Geely and Volvo's collaborative brand is called Lynk & Co. Lynk & Co: The Lynk & Co brand is a new-era premium brand jointly created by Geely Auto and Volvo Cars, currently offering SUV models such as Lynk & Co 01 and Lynk & Co 02, sedan model Lynk & Co 03, and PHEV models. Cooperation between Geely and Volvo: Volvo Car Corporation and Geely Automobile Holdings Limited jointly announced that they have reached an optimal merger plan. While maintaining their respective independent corporate structures and achieving strategic goals, they will continue to expand cooperation in the automotive new four modernizations (electrification, intelligence, connectivity, and sharing), deepen collaboration, leverage synergies, truly maximize the value of business integration, strengthen technological advantages, and continue to lead industry transformation.
5
0
Share

At what tire pressure does a Mercedes-Benz trigger an alert?

Mercedes-Benz vehicles typically trigger a tire pressure alert when the pressure falls below 1.8 bar or exceeds 3.0 bar. At this point, tire inspection and pressure adjustment are necessary. According to the international GBT2978-2008 standard, the recommended tire pressure for standard Mercedes-Benz tires is 2.4-2.5 bar. During winter, it's advisable to increase the tire pressure by approximately 0.2 bar above the standard pressure. In summer, the tire pressure can generally be about 0.1 bar lower than the standard to prevent tire blowouts due to high temperatures. Tire pressure reset method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete.
1
4
Share

What are the operating mechanisms of a clutch?

The operating mechanisms of a clutch include: clutch pedal, release rod, release fork, adjusting fork, release sleeve, release bearing, release lever, and return spring. The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. The maintenance methods for the clutch are: 1. When the friction plates, driving plates, or pressure plate inside the clutch are contaminated with oil or rust, they should be disassembled to remove the oil and cleaned thoroughly with gasoline; 2. Minimize stepping on the clutch to prevent clutch slippage and burning of the clutch plates; 3. Check the friction plates for exposed rivet heads, cracks, breakage, or large areas of scorching, and replace with new friction plates if necessary; 4. Before installing the clutch, it must be thoroughly cleaned to remove anti-rust grease and debris.
17
2
Share

What are the reasons for the tire pressure monitoring not displaying?

The tire pressure monitoring not displaying may be due to the following reasons: 1. The battery of the module is depleted, and generally, the entire tire pressure monitoring module needs to be replaced. 2. There is something blocking the inspection port of the module, preventing it from detecting. 3. Pairing failure, requiring re-pairing. Some vehicle models can complete this on their own, but most models require professional pairing at a 4S shop. 4. The module is already damaged and can only be replaced with a new one. Below are the functions of monitoring tire pressure: 1. Preventing car accidents. Continuously monitoring the tire pressure of the car can effectively prevent sudden tire hazards, promptly alert the driver to take corresponding measures, and avoid accidents. 2. Extending the lifespan of the tires, ensuring that the car tires operate under normal pressure and temperature. Consistent tire pressure can effectively reduce wear, making the car's driving smoother without deviations. 3. Reducing wear on the car's suspension and extending its service life.
7
5
Share

What does the pattern next to the Mercedes-Benz door mean?

This logo is a stylized "L", representing the extended version. The purpose of this logo is to distinguish between standard wheelbase and long wheelbase models. Introduction to Mercedes-Benz: Mercedes-Benz, a German automobile brand, is one of the premium car brands renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe styles. Exterior Design: The exterior appears noble yet elegant, with a streamlined body design that inherits Mercedes-Benz's century-old tradition. The exterior styling is exquisite and elegant, with luxury embedded in its beauty. From the front view, the headlights and grille are seamlessly and harmoniously connected, without any abruptness. The sharp eagle-eye headlights are serious yet slightly lively, giving the car a dignified yet fashionable appearance. The transparent lamp cover uses an integrated combination of large bulbs and employs H7-type high-brightness bulbs, which not only meet the vehicle's lighting needs but also ensure convenience during maintenance.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.