How many locations are there for driver's license renewal in Zhangjiagang?

2 Answers
LeRobert
07/29/25 11:48pm
There are two locations for driver's license renewal in Zhangjiagang. You can apply for a renewal of your motor vehicle driver's license within 90 days before its expiration date. Here is some additional information: For individuals aged 60 and above: If you hold a driver's license for large buses, tractors, city buses, medium-sized buses, or large trucks, you can apply to replace it with a motor vehicle driver's license for small cars or small automatic transmission cars. For individuals aged 70 and above: If you hold a driver's license for ordinary three-wheeled motorcycles or ordinary two-wheeled motorcycles, you can apply to replace it with a motor vehicle driver's license for light motorcycles. Regulations: You can apply for the replacement of a damaged driver's license if your current license does not have any of the following conditions: 12 or more demerit points, overdue inspection, being seized, detained, temporarily suspended, revoked, or locked for revocation with the possibility of restoration.
Was this review help?
15
1
Share
VonWalter
08/16/25 3:12am
I renewed my driver's license in Zhangjiagang, and what impressed me the most was the Zhangjiagang Vehicle Management Office as the main processing point. Located in the central area of the city, it was very convenient to find using navigation software. Before going, I checked the Traffic Management 12123 App to book an appointment, which reduced waiting time. I brought my ID card, old driver's license, and medical examination report with me. The medical examination is usually done at designated hospitals, with low fees and takes about half an hour to complete. On-site, there are self-service machines and counter services. If there are few people, it can be done in twenty minutes. On weekdays, there are fewer people before 9 a.m., but it gets crowded in the afternoon, which can cause delays. I heard there are also convenient service points, such as street community centers or township agency stations, but to be safe, it's better to go to the Vehicle Management Office. You can start the renewal process 90 days before the expiration date—don’t wait until it expires to avoid trouble if stopped by traffic police. The staff at the Vehicle Management Office were very helpful, guiding the entire process efficiently and providing temporary proof, ensuring no disruption to daily vehicle use. With ample parking spaces and a clean environment, Zhangjiagang really excels in these public services. The renewal process was smooth and hassle-free, offering a great citizen experience. The follow-up services are also reliable, ensuring peace of mind for driving and travel.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What is the correct method to start an automatic transmission car?

Correct method to start an automatic transmission car: 1. After sitting in the driver's seat, press the start button directly; 2. Press the brake pedal and press the start button to ignite and start the engine; 3. Release the foot brake, and you may choose to warm up the car while stationary; 4. Press the brake pedal again and shift to D (Drive) gear; 5. Release the handbrake and slowly release the foot brake to start moving; 6. Apply the accelerator smoothly according to road conditions for safe driving. An automatic transmission car does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Generally, an automatic transmission has six gear positions: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). The automatic transmission uses a planetary gear mechanism to shift gears automatically according to the degree of accelerator pedal pressure and changes in vehicle speed.
14
3
Share

How to Press the Clutch When Shifting Gears?

To press the clutch when shifting gears, use the ball of your left foot with the heel as the pivot point. First, press the clutch pedal all the way down, then engage the corresponding gear while lightly pressing the accelerator. Simultaneously, quickly lift the clutch to the semi-engaged position. Once you feel the clutch engage, you can fully release it. The clutch is located inside the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission. Its function is to allow the driver to properly operate it, enabling the indirect engagement of the clutch's front and rear parts for smooth starting.
3
1
Share

How to Deal with Spark Plugs Soaked in Engine Oil?

The method to deal with spark plugs soaked in engine oil is: use paper to wipe off the oil on the spark plug, gently sand the electrodes a few times with fine sandpaper, or slightly burn the electrodes of the spark plug on the flame of a gas stove or alcohol lamp. The function of a car's spark plug is to discharge the pulsed high-voltage electricity generated by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to ignite the gas in the cylinder. Methods for maintaining and servicing car spark plugs: 1. Clean the dust and impurities around the spark plug, usually by using compressed air or a fine soft tube to blow them away; 2. When removing the spark plug, ensure the engine is in a cold state and never disassemble or install the spark plug while the car engine is running; 3. After removing the spark plug, protect the installation port to prevent impurities or dust from entering the cylinder; 4. When removing the spark plug, use the correct tools, ensure the wrench fits properly, and operate it straight and correctly to avoid damaging the insulating ceramic body.
16
5
Share

What gear should be engaged when parking on a downhill slope?

When parking on a downhill slope, engage the reverse gear before turning off the engine to prevent the car from rolling forward. For parking on level ground, first shift to neutral, apply the handbrake, and then turn off the engine. Engaging a gear utilizes engine braking, where the wheels are connected to the engine crankshaft through gears, so wheel rotation will inevitably drive the engine. The reverse gear, fully known as the reverse driving gear, is one of the three standard gears in a car. It is marked as "R" on the gear console and is designed to allow the vehicle to move backward, serving as a special driving gear. Precautions for reversing on a downhill slope include: 1. Ensure the vehicle is completely stopped before engaging reverse gear; 2. Press the clutch pedal all the way down when shifting to reverse; 3. Maintain slow speed during reversing and avoid pressing the accelerator.
5
1
Share

How to Remove Asphalt Stuck on Tires?

The methods to remove asphalt stuck on tires are: 1. Spray a dedicated asphalt cleaner on the tire, and after the asphalt softens, use a small shovel to remove it, or repeatedly wipe it with a cloth; 2. Use boiling water by pouring it over the asphalt and then scrubbing repeatedly with a brush; 3. Wash the tire with soapy water and scrub repeatedly with a brush; 4. If the asphalt has been compacted over time and adheres to the tread patterns, it needs to be handled at an auto repair shop. The methods for maintaining tires include checking the tire pressure, which can be judged based on the standards in the car maintenance manual, and promptly removing any stones or foreign objects in the tires.
10
1
Share

Which One is the Clutch Pedal?

The clutch pedal is the first stepping point from left to right in the driver's cabin. It serves as the control device for the clutch assembly in manual transmission vehicles. Its primary function is to engage and disengage the clutch between the engine and the transmission through proper operation by the driver. The clutch consists of friction plates, spring plates, a pressure plate, and a power output shaft. When starting the vehicle, the correct operation method for the clutch is to press down the pedal, engage the gear, then lift the clutch pedal until the friction plates begin to make contact. At this point, the foot should pause briefly while simultaneously applying throttle. Once the clutch plates are fully engaged, the clutch pedal can be completely released.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.