How Many Liters of Transmission Oil Should Be Added to the Emgrand GS?

1 Answers
Richard
07/30/25 9:50am
Geely Emgrand GS requires 4L of transmission oil. The selection of oil should be based on the engine requirements. This vehicle is equipped with a turbocharged engine, and fully synthetic oil can be used. It is recommended to use 5W-30 oil. Below are the benefits of using fully synthetic oil: 1. Wider temperature range. 2. Less prone to deterioration, lower evaporation loss, and longer service life compared to conventional oil. 3. Excellent chemical stability, good radiation resistance, high oil film strength, fewer foams, good lubrication, and reduced wear. 4. Reduced thermal degradation of oil, fuel savings, and better engine protection.
Was this review help?
12
1
Share
More Forum Discussions

What is the fuel consumption of the Haval H6 Guochao Edition?

There are 7 available models of the Haval H6 Guochao Edition. Among them, the 2021 Guochao Edition 1.5GDIT automatic Super Luxury, Luxury, and Champion versions, equipped with a 169 horsepower engine, have an NEDC fuel consumption of 6.6L/100km. The 2021 Guochao Edition 1.5T automatic Champion and Urban versions, equipped with a 150 horsepower engine, have an NEDC fuel consumption of 6.9L/100km. The 2021 Guochao Edition 2.0GDIT automatic GT and Champion versions, equipped with a 224 horsepower engine, have an NEDC fuel consumption of 7.1L/100km. The working condition fuel consumption of the Haval H6 Guochao Edition is 6.9L/100km. Its power is weaker than the high-power 1.5T engine, yet its fuel consumption is higher. The fuel tank capacity of the Haval H6 Guochao Edition is 58L. The distance each model can travel on a full tank is as follows: Models equipped with the 169 horsepower engine can travel 58/6.6*100=878km on a full tank. Models equipped with the 150 horsepower engine can travel 58/6.9*100=840km on a full tank. Models equipped with the 224 horsepower engine can travel 58/7.1*100=816km on a full tank. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is less likely to vaporize during a cold start, requiring more gasoline to combust, thus increasing fuel consumption. Additionally, in low temperatures, the engine computer controls the car to use higher RPMs to warm up, which also increases fuel consumption.
13
5
Share

What is the total weight of the Great Wall Ora Black Cat in kg?

The total weight of the Great Wall Ora Black Cat car is 977kg. Here are the detailed specifications of the Great Wall Ora Black Cat: Vehicle Positioning: The Ora Black Cat is positioned as a pure electric crossover, with dimensions of 3495mm*1660mm*1560mm and a wheelbase of 2475mm. Configuration: The Ora Black Cat is equipped with numerous active safety features such as ABS anti-lock braking system, real-time reversing camera, and ACC adaptive cruise control system. Power System: It is powered by a permanent magnet synchronous motor from BorgWarner, with a maximum power of 35 kW and a maximum torque of 125 Nm. The long-range model is equipped with a motor that has a maximum power of 45kW and a peak torque of 130Nm, offering a maximum range of 405km. Additionally, the entry-level model with a range of 301km and the mid-range model with a range of 351km are both equipped with a motor that has a maximum power of 35kW and a peak torque of 125Nm. The Ora Black Cat is a new energy vehicle built on the ME platform, the first dedicated electric vehicle platform developed by Great Wall Motors in China. The Ora Black Cat was designed by international aesthetics master Nakajima Keishin, combining full surfaces with minimalist elements to convey the clean and neat Ora design aesthetics. With front and rear decorative panels, a streamlined and dynamic body paired with a high-tech interior, the Ora Black Cat offers 12 exterior colors and 8 interior colors, including the new primrose pink and rose gold exclusive color schemes, along with rich interior color options such as titanium white, dynamic blue, and starlight silver. Additionally, the Ora Black Cat is equipped with the iFLYTEK cloud voice recognition system, allowing voice control for functions such as volume adjustment, radio station selection, music playback, air conditioning settings, and Bluetooth calls, as well as querying common information like weather, schedules, flights, and news.
3
0
Share

What are the main reasons for unstable idle speed in electronic fuel injection engines?

Fuel system failures mainly include gasoline quality, fuel pump, fuel filter, fuel pressure regulator and its pipelines, as well as sludge and carbon deposits adhering to the throttle and fuel injectors. Electrical circuit failures primarily involve electronic control components, relays, fuses, and wiring issues. Reasons for unstable idle speed: 1. Intake system: The first reason is the intake system, including leaks in the intake pipe and various valves. Air entering from the intake pipe, gasoline vapor from the charcoal canister valve, and exhaust gases entering the intake pipe can cause the mixture to be too rich or too lean, leading to abnormal engine combustion. Excessive carbon buildup in the throttle and intake passages. ③ Inaccurate idle intake air volume. 2. Fuel system: Fuel injector malfunction. If the fuel injector has a drip or blockage, it cannot inject fuel according to the ECU's instructions, resulting in a mixture that is too rich or too lean, causing poor operation in individual cylinders and leading to unstable engine idle speed. Fuel pressure issues. If the fuel pressure is too low, the fuel sprayed from the injector will have poor atomization or form a line, and in severe cases, only droplets will be sprayed, reducing the fuel injection amount and making the mixture too lean; if the fuel pressure is too high, the actual fuel injection amount increases, making the mixture too rich. Inaccurate fuel injection amount. Faults in various sensors or wiring can cause the control unit to issue incorrect commands, resulting in incorrect fuel injection amounts and causing the mixture to be too rich or too lean, which is an indirect cause of unstable idle speed. 3. Ignition system: Most modern cars integrate the ignition module with the ignition coil or use dual ignition coils or direct ignition. First, the ignition module: if it malfunctions, it can cause weak sparks or no spark at all. For testing, you can only measure the secondary voltage in some models; the primary voltage is not visible, but you can test the ignition trigger signal. Issues with the ignition coil and ignition module may be due to missing ignition signals from the computer or problems with the ignition module's power supply lines. In actual repairs, this situation occurs frequently. New cars have a higher chance of experiencing this issue. When repairing new cars, some mechanics still spend a lot of time searching for various problems. For new cars, it's essential to ensure their power supply, both positive and negative terminals, operates reliably.
11
1
Share

Why does the half shaft of Geely Vision keep falling out?

Geely Vision half shaft falling out may be due to deformation of the front suspension bracket. The following is detailed information about Geely Vision: 1. Model information: Geely Vision refers to Geely's first mid-level business family sedan. The Geely Vision was developed over more than 20 months, with five major performance indicators as design orientations: power, safety, space, handling, and comfort, marking the beginning of a new era for Geely Automobile. 2. Function: The automobile half shaft is used to transmit vertical forces, longitudinal forces, lateral forces, and reaction forces between the road surface and the vehicle frame or body. The automobile half shaft is located at the end of the transmission system, capable of changing the speed and torque from the transmission and transmitting them to the driving wheels.
11
2
Share

Does the imported Mercedes-Benz C-Class have a 48V mild hybrid system?

The imported Mercedes-Benz C-Class is equipped with a 48V mild hybrid system. The working principle of the 48V mild hybrid system is: combining the traditional internal combustion engine with a 48-volt low-voltage electric motor to recover energy from braking and deceleration, and store it in the battery. Taking the 2021 imported Mercedes-Benz C-Class as an example, its body dimensions are: length 4698mm, width 1810mm, height 1408mm, wheelbase 2840mm, and fuel tank capacity 66l. The 2021 imported Mercedes-Benz C-Class is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 250Nm, and is paired with a 9-speed automatic transmission.
7
3
Share

What are the reactions of a car when the three-way catalytic converter is clogged?

The reactions of a car when the three-way catalytic converter is clogged include: 1. The car experiences difficulty in acceleration, with the engine RPM and vehicle speed struggling to increase; 2. Automatic transmission vehicles are forced to frequently downshift; 3. The engine power decreases, and exhaust emissions exceed the standard; 4. The engine shakes, the fault light comes on, and the car frequently stalls; 5. The exhaust pipe temperature continuously rises, reaching the ignition point of nearby components, which can easily lead to spontaneous combustion. Solutions for a clogged three-way catalytic converter: 1. Remove the three-way catalytic converter and soak and clean it with oxalic acid or toilet cleaner; 2. Replace the three-way catalytic converter; 3. Add gasoline additives and avoid using inferior gasoline and gasoline additives.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.