How many liters of transmission oil should be added to an Audi Q5?

1 Answers
CooperLee
07/29/25 8:55pm
Audi Q5 transmission oil requires approximately 8L for a gravity replacement and around 12L for a machine flush replacement. The Audi Q5 is a mid-size SUV produced by Audi, with dimensions of 4629mm in length, 1898mm in width, and 1655mm in height, and a wheelbase of 2807mm. The domestic version of the Audi Q5 is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 169 kW and a peak torque of 350 Nm. The engine reaches its maximum power output at 4300 to 6000 rpm and its maximum torque at 1500 to 4200 rpm.
Was this review help?
2
4
Share
More Forum Discussions

Is It Effective to Replace with an Aftermarket Catalytic Converter?

Replacing with a qualified aftermarket catalytic converter is indeed effective. However, the auto parts market is a mixed bag, and without professional knowledge, it is best to choose to replace it with an original catalytic converter at a 4S shop. Generally, the compatibility of original catalytic converters is better than that of aftermarket ones, so using an original catalytic converter can effectively catalyze harmful substances in the exhaust. Precautions: 1. Mechanical damage: If the catalytic converter has mechanical damage, has exceeded 200,000 kilometers, or suffers from lead poisoning, cleaning will be of little use. 2. Engine stalling during cleaning: If the engine stalls during the cleaning process, immediately disconnect the hose connecting the engine to the equipment and close the flow valve. Restart the engine and only reconnect and adjust after the idle speed stabilizes. 3. Check the mixture concentration: Ensure the mixture concentration is appropriate to guarantee that the liquid can be inhaled into the intake tract in a mist form.
18
1
Share

What does the absolute rate of vehicle damage insurance mean?

Vehicle damage insurance absolute rate refers to the absolute deductible, which means the amount of loss that the insured must bear before the insurer makes a payment according to the insurance conditions. In commercial motor vehicle insurance, the deductible is usually reflected in the form of an absolute deductible. Generally, this deductible applies to each loss. Additional information: 1. The significance of the absolute deductible: Establishing an absolute deductible helps reduce the moral hazard of the insured. The absolute deductible is different from the relative deductible. Each time an insured event occurs to the subject matter of insurance, the insured must bear the corresponding cost. Therefore, to some extent, establishing an absolute deductible can urge drivers to drive carefully and reduce the probability of insured accidents. 2. Deductible amount: New drivers, due to their lack of driving skills, are more likely to have minor collisions during driving, so they can choose a lower-level absolute deductible, but they will have to pay more in premiums accordingly. Experienced drivers with many years of driving experience have proficient driving skills and are less likely to have minor collisions during driving, so they can pay relatively cheaper premiums and choose a higher-level absolute deductible.
17
0
Share

What are the effects of a faulty supercharger bypass valve?

A faulty supercharger bypass valve can affect engine performance. If the supercharger bypass valve is broken, it will remain in a constantly open state. In this case, even when the exhaust pressure is insufficient, a portion of the exhaust gases will directly enter the exhaust pipe without passing through the turbocharger, leading to severe turbo lag and significantly impacting the engine's power output. The primary function of the supercharger bypass valve is to automatically open during high-speed and high-load conditions, allowing some exhaust gases to bypass the turbocharger and enter the exhaust pipe directly. This reduces the exhaust gas pressure and subsequently lowers the turbocharger's rotational speed. In other words, the main role of the supercharger bypass valve is to regulate exhaust gas pressure.
6
4
Share

Can a vehicle undergo annual inspection in another location?

Except for large passenger buses and school buses, which cannot undergo annual inspection in another location, all other vehicles can be inspected in a different location. Currently, the traffic management authorities have fully implemented cross-province annual inspections for small cars, trucks, and medium-sized buses. Applicants can directly undergo the inspection in a province other than where the vehicle is registered and receive the inspection compliance sticker without needing to apply for an inspection delegation procedure. Large passenger buses and school buses cannot be inspected in another location and must return to the vehicle's registration location for inspection. Annual inspection time requirements: Small and micro non-commercial passenger vehicles are exempt from inspection for the first 6 years. After 6 years but less than 10 years, they must be inspected every two years; after 10 years but less than 15 years, they must be inspected annually; after 15 years, they must be inspected every 6 months. Commercial passenger vehicles must be inspected annually within the first 5 years; after 5 years, they must be inspected every 6 months. Trucks and large and medium-sized non-commercial passenger vehicles must be inspected annually within the first 10 years; after 10 years, they must be inspected every 6 months. Imported vehicles, like other vehicle types, can undergo regular inspections at any inspection station. Annual inspection precautions: Vehicles that fail the annual inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not undergo annual inspection without reason or fail the inspection are not allowed to drive on the road and cannot be transferred. Vehicles that meet the scrapping conditions or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.
11
2
Share

Why does the steering wheel feel heavy after switching to summer tires?

It may be due to insufficient tire pressure. Underinflated tires can affect the steering wheel's heaviness, and in severe cases, may even lead to the risk of a tire blowout. A heavy steering wheel is a common issue and does not necessarily indicate a problem with the car's quality. Car owners should accumulate more knowledge about common car maintenance to handle such situations correctly. Here is some additional information: 1. Electro-hydraulic power steering. The electro-hydraulic power steering system is an upgraded version of the purely mechanical hydraulic power steering. Originally, it used an oil pump to provide assistance, making steering easier for the driver. 2. Issues with steering fluid. In such power steering systems, the feeling of steering heaviness is usually relatively constant. If it suddenly becomes very heavy one day or gradually becomes heavier, it could be due to dirty steering fluid, which, like engine oil, needs to be replaced.
6
1
Share

What does the exit line mean?

The exit line refers to the situation where the rear or body of the vehicle crosses the line when reversing out of the parking space. In simple terms, if the vehicle passes the reversing test in Subject 2, it means the vehicle has reached the designated position. However, if an error is reported during the exit process, it indicates a problem during exiting, most likely that the vehicle body touches the edge detection line of the garage. The garage baseline does not only refer to the rear line of the garage; the entire bottom of the garage can be called the garage baseline. The exit line means the vehicle body touches the line during the exit process. The content of Subject 2 driving test includes: 1. Large vehicles: large buses, tractors, city buses, medium-sized buses, and large trucks are tested on pile test, hill start, parallel parking, single-plank bridge, curve driving, right-angle turn, narrow gate, continuous obstacles, bumpy road, narrow road U-turn, as well as simulated highway, continuous sharp turns on mountain roads, tunnels, rain (fog) days, slippery roads, and emergency handling. 2. Small vehicles: small cars, small automatic cars, small automatic cars for the disabled, and low-speed trucks are tested on reversing into the garage, parallel parking, curve driving, and right-angle turn.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.