How Many Liters of Transmission Oil Does the Land Cruiser Prado Require?
3 Answers
Land Cruiser Prado transmission oil capacity depends on specific circumstances: 1. Regular transmission oil change requires 4 liters; 2. Oil pan removal requires approximately 5-6 liters. The transmission serves these functions: 1. Maintains gearshift system cleanliness; 2. Extends drivetrain component lifespan; 3. Provides cold-weather performance with effective low-temperature lubrication; 4. Minimizes fluid loss under severe operating conditions. The Prado is Toyota's midsize SUV, also known as Land Cruiser Prado. Taking the 2019 Prado TXL Premium automatic version as an example: its dimensions are length 4840mm, width 1885mm, height 1890mm, with a 2790mm wheelbase.
Last time I helped a friend change the oil in their Prado, I specifically checked the manual. The 2700 and 4000 models use different transmissions, and the oil volume differs significantly. For the older LC120 with a V6 engine, a gravity change requires about 5.5 liters, but if you use a flushing machine, you'll need to prepare 12 liters. The newer LC150's 8AT transmission is more precise—the manual states a baseline of 7.8 liters, but in practice, you need to check the dipstick multiple times. Make sure to use only Toyota ATF WS-certified oil; don’t cheap out and mix other types. After the change, remember to check the oil level when the engine is warm—the fluid must be at the midpoint. Too much or too little can damage the transmission.
Just saw the mechanic do this job at the repair shop last week! The amount of transmission fluid for a Land Cruiser depends on the replacement method. Simply unscrewing the drain plug only releases about 4 liters, but if you remove the oil pan and clean the filter screen, you can drain over 6 liters. Nowadays, the popular method is using a circulation machine for fluid replacement—though it consumes up to 12 liters of oil, it replaces over 90% of the old fluid. Special reminder for desert off-road enthusiasts: For vehicles frequently running under high load in sandy conditions, it’s recommended to change the fluid every 40,000 km, as high temperatures can degrade the fluid quickly. Opt for light-red ATF WS fluid, and after refilling, cycle through all gear positions to ensure proper fluid circulation.
