How many liters of transmission oil does the Kia K3 require?

1 Answers
StFinley
07/30/25 10:55am
Kia K3 requires 3 to 4 liters of transmission oil when using the gravity oil change method, and 10 to 12 liters when using the circulation machine oil change method. Transmission oil is generally replaced every 60,000 kilometers. Long-term failure to replace it can lead to poor lubrication of the transmission, severe wear of components, and a shortened transmission lifespan. When replacing the transmission oil, the transmission oil filter screen should also be replaced. The Kia K3 is a K-series model under Dongfeng Yueda Kia, featuring a trendy and stylish exterior design, a three-spoke flat-bottom steering wheel, a floating central control screen, and air conditioning controlled via touchscreen and buttons.
Was this review help?
12
3
Share
More Forum Discussions

Why is the fan noise loud in the Venucia D60?

The loud fan noise in the Venucia D60 can be attributed to the following reasons: 1. Issues with the fan belt or the balance of the fan blades. 2. A dirty radiator leading to poor heat dissipation, affecting the airflow, which causes the electric fan to increase its speed, thereby making the fan noise louder. 3. Loose fan screws. 4. Excessive bearing wear can also lead to louder fan noise; check the radiator and surrounding components to see if the bearing is excessively worn. Below is some relevant information about the Venucia D60: 1. Body dimensions: The body length is 4756mm, width is 1803mm, height is 1487mm, and the wheelbase is 2700mm. 2. Powertrain: Equipped with the Nissan HR16 1.6L engine, with a maximum power output of 126 horsepower and a peak torque of 154Nm, paired with a CVT transmission. 3. Features: Includes one-key start, automatic start-stop, multifunction steering wheel, and power-folding mirrors.
6
5
Share

What is the emission standard for China VI vehicles?

VI refers to China VI, the National Sixth Stage Emission Standard for Motor Vehicle Pollutants, abbreviated as the China VI standard. Compared to China V fuel, China VI fuel can reduce particulate emissions by up to 10%, significantly lowering the pollutant content in vehicle exhaust. The China VI emission standard is 40%-50% stricter than the current China V standard. Below are the market impacts of the China VI emission standard: Sales of imported vehicles: The Euro VI emission standard for imported vehicles will conflict with the China 6b emission standard, which will affect the sales of imported vehicles. Domestic brand vehicles: The stricter China VI emission standard increases R&D costs for domestic brands, leading to corresponding price increases for these vehicles. Electric vehicles: The implementation of the China VI emission standard will boost the activity of the electric vehicle market and increase sales of pure electric vehicles. Used car market: The China VI emission standard may cause many potential used car buyers to adopt a wait-and-see attitude, severely impacting the resale value of China V models.
19
5
Share

Why Do Hatchbacks Have Rear Wipers?

Hatchbacks have rear wipers because their rear design is vertically straight, causing the airflow from the sides of the car to swirl there, creating vortices. This leads to the accumulation of rainwater and debris on the rear window, necessitating the use of a wiper. Hatchbacks are typically of the hatchback type, where the rear glass and the rear door are integrated. The wiper's pivot is installed on the metal body of the rear door below the glass, so when the rear door is opened, it does not interfere with the wiper. The moving body of the car generates significant shear forces due to friction, and these sheared airflows are released at the rear, creating turbulence. As some of the air moves with the vehicle, there is a shortage of air at the rear, forming a low-pressure zone. When driving on dirty roads, the dust or mud kicked up by the rear wheels accumulates in this low-pressure zone at the rear due to the difference in air pressure. This is why the rear of the car is often the dirtiest after a long trip, making the wiper essential for cleaning the rear windshield and ensuring driving safety.
8
5
Share

Is it necessary to install underbody armor for a new car?

It is not necessary to install underbody armor for a new car. New cars have already undergone anti-rust treatment at the factory, and the underbody has been sprayed with a protective layer, which is sufficient for driving in relatively flat areas such as cities. However, if the underbody of the car is clean and flat when it leaves the factory, and the steel components are exposed, it indicates that the car has not undergone anti-rust treatment. If the car is driven in harsh environments year-round, it is very necessary to install underbody armor. When driving, small stones may be kicked up on some roads, and these stones can have a significant impact on the car's underbody. This protective layer can effectively shield the underbody from the impact of small stones.
17
2
Share

What is the normal tire pressure for the Buick Verano?

The normal tire pressure for the Buick Verano is around 2.5, with a fluctuation of 0.2. Due to the effect of thermal expansion and contraction, the tire pressure can be slightly higher in winter and slightly lower in summer. When the vehicle is equipped with a Tire Pressure Monitoring System (TPMS), the system can alert the driver in case of low tire pressure. The Buick Verano is a new compact model under the Buick brand. The dimensions of this car are 4718mm in length, 1802mm in width, and 1466mm in height (1471mm for the 1.5T model), with a wheelbase of 2700mm. The Buick Verano offers two engine options: a 1.5L and a 1.5T, with maximum power outputs of 118 horsepower and 169 horsepower, respectively.
8
5
Share

How to Set One-Touch Window Lift?

Setting one-touch window lift method: Pull the window button directly to raise the window to the top. Then, keep holding it for 3 to 5 seconds before releasing. Next, press the window button to lower the window completely. Again, hold for 3 to 5 seconds before releasing. After that, test the one-touch lift function, and the setup is now complete. Whether controlled by a smart key or mechanical button, the one-touch window lift generally comes with an anti-pinch feature. During the automatic closing operation, if an object is detected between the glass and the window frame, the closing action will automatically stop midway and revert to the initial state to prevent potential pinching hazards.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.