How many liters of transmission oil does the Kia K3 require?

1 Answers
AaronDella
07/29/25 5:09pm
The Kia K3 requires 2.5 liters of transmission oil. The Kia K3 is a compact vehicle equipped with a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine. Its exterior dimensions are 4660mm in length, 1780mm in width, and 1450mm in height, with a wheelbase of 2700mm. The Kia K3 is fitted with a CVT transmission, delivering a maximum power of 85 kW and a maximum torque of 143.9 Nm. It features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
6
2
Share
More Forum Discussions

How many cylinders does the Baojun 510 engine have?

LAR is the engine model used in the Baojun 510, with a maximum horsepower of 99 hp, a maximum power of 73 KW, a maximum power speed of 5800 rpm, and a peak torque of 135 N.m. The engine of the Baojun 510 is domestically produced. The Baojun 510 is a compact SUV under the Baojun brand. For daily maintenance of the Baojun 510 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
12
5
Share

What car has a logo of K?

The car with a logo of K is the Knight XV. Here are some detailed introductions about the Knight XV: 1. The Knight XV is an ultra-luxury armored off-road vehicle manufactured by a Canadian automotive company in Toronto. It belongs to an extremely niche brand: the Knight XV draws inspiration from heavy military armored vehicles as an SUV. Additionally, the Knight XV can run not only on gasoline or diesel fuel but also on biofuels. 2. The interior of the Knight XV is luxurious, even the entertainment facilities are comprehensive: equipped with a 27-inch LCD TV, a PS3 game console, a wet bar, an icebox, and a cigar box, all reflecting luxury. The cashmere carpets and electric leather executive chairs in the car exude an air of opulence. 3. The Knight XV adopts a body-on-frame structure, uses a four-wheel-drive system, and is paired with a 5-speed automatic transmission: ensuring the Knight XV's off-road capability under complex road conditions.
12
5
Share

Is the U-turn gap affected by red lights?

If the gap is marked with dashed lines, the U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. You can make a U-turn directly as long as it does not interfere with other normally moving vehicles and ensures your own safety. If the gap is marked with solid lines, then the U-turn must cross the pedestrian crossing and is subject to traffic signals. If you need to cross the pedestrian crossing to make a U-turn, you must yield to pedestrians: Pedestrians walking on the right side of the road's crosswalk who have not reached the centerline of the road. Vehicles on the left side of the road should slow down and proceed with caution, ensuring safety before passing the crosswalk. Pedestrians waiting outside the boundary line between motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed with caution, ensuring safety before passing the crosswalk. If pedestrians cross the dividing line between motorized and non-motorized lanes, vehicles that do not stop and yield are committing a traffic violation and should be penalized. After pedestrians enter the motorized lane via the crosswalk, vehicles should slow down and proceed with caution, ensuring safety before passing the crosswalk. If vehicles do not stop and yield, it is a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. If vehicles do not stop and yield, it is a violation and should be penalized. Pedestrians crossing the centerline of the road and entering the motorized lane. If vehicles do not stop and yield, it is a violation and should be penalized. If the road is divided by a green belt, pedestrians waiting in the middle of the road must be yielded to. Vehicles should slow down and proceed with caution, ensuring safety before passing the crosswalk. Scenarios where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn is permitted. If there is a U-turn traffic light, follow its instructions. If there is no traffic light, make the U-turn based on the specific situation, ensuring it does not interfere with other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: If there is no explicit prohibition against U-turns, they are allowed. 'No explicit prohibition' means there are no 'no-U-turn' or 'no-left-turn' signs, and the centerline is not solid. In such cases, U-turns are permitted. U-turns are also allowed on yellow grid lines: Yellow grid lines indicate no-parking zones, typically placed at intersections prone to congestion due to temporary parking, important facility entrances, or other necessary locations. Parking on these lines (including waiting for traffic lights) is a violation. However, while parking is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. If 'no-left-turn' and 'U-turn allowed' signs appear together: U-turns are permitted, but left turns are prohibited. Note that 'no U-turn' is not the same as 'no left turn.' Things to note when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable location for a U-turn. If there is a 'no-left-turn' sign ahead, even if there is no explicit 'no-U-turn' sign, U-turns are not allowed at that intersection because U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to straight-moving vehicles before making a U-turn. If you interfere with their normal movement, you will bear full responsibility for any accidents. Near the intersection stop line, lanes usually have guiding arrows. The leftmost lane does not always have a left-turn arrow. If it has a straight arrow, U-turns are prohibited even if there are no explicit 'no-U-turn' signs.
8
5
Share

How to apply for a same-day Beijing Entry Permit?

To apply for a same-day Beijing Entry Permit, you need to visit the Beijing entry checkpoint in person as online applications are not available. Through the Beijing Traffic Police APP's entry permit module, drivers can apply for an electronic Beijing Entry Permit online 1 to 4 days in advance. Upon successful application, a QR code-enabled electronic permit will be issued. During the application process, the applicant is required to provide driver, vehicle, and trip details, along with uploading photos of relevant documents. Once the background review is completed, the applicant will be notified of the result via APP message. By logging into their registered account, applicants can check the validity period of their approved electronic Beijing Entry Permit.
8
5
Share

Can the Dash Cam Record Automatically After Parking?

Yes, the dash cam can record automatically after parking. If needed, you can set the dash cam to motion detection mode and connect its power supply directly to the battery to enable automatic recording while parked. Different models of dash cams may behave differently. Generally, single-lens dash cams are powered by the car's cigarette lighter or other in-car power sources. There are two types: 1. Those with motion detection usually have a small built-in battery. After the engine is turned off, they will automatically start recording when movement is detected in front of the lens. The built-in battery of such dash cams is usually sufficient for one night in a relatively quiet parking lot, but may not last longer or work well in busier areas. 2. Those without motion detection will shut down after the engine is turned off and become basically useless when parked. Dual-lens dash cams, which typically have one camera at the front and one at the rear of the vehicle, require wiring during installation and are directly connected to the car battery via the fuse box. These dash cams will continue to work at night as they draw power from the battery, making them suitable for outdoor or off-road parking. The downside is that they can drain the battery.
3
1
Share

What is the service warning light?

service is not a fault light, but a reminder to the driver that the vehicle has traveled a long distance and requires maintenance. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The car dashboard is a device that reflects the working conditions of various systems of the vehicle. Common indicator lights include the fuel indicator light, washer fluid indicator light, electronic throttle indicator light, front and rear fog light indicator lights, and warning lights.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.