···
Log in / Register

How many liters of transmission oil does the Focus require?

4 Answers
StKaden
08/29/25 6:57am

The Focus requires approximately 2 liters of transmission oil for manual transmissions and 5.5 liters for automatic transmissions. If using the circulating machine oil change method, around 10 liters may be needed. Transmission oil is essential for maintaining the cleanliness of the gear system, ensuring proper transmission operation, and extending the lifespan of the transmission components. The Focus is an A-segment family sedan with body dimensions of 4378mm in length, 1810mm in width, and 1468mm in height, featuring a wheelbase of 2705mm. In terms of safety, the Focus is equipped with keyless entry, one-touch start, TPMS tire pressure monitoring, EBD electronic brake-force distribution system, EPAS electric power-assisted steering system, and a lightweight suspension system with SLA short long arm blade rear independent suspension featuring an independent subframe.

Was this review help?
2
5
Share
SanMolly
09/11/25 4:30am

I've studied maintenance data for many Ford models, and the transmission fluid quantity for the Focus depends on the specific model configuration. The manual transmission version is more fuel-efficient, requiring approximately 1.8-2.2 liters. If you're changing it yourself, buying two 1L bottles is sufficient. The automatic transmission fluid quantity varies significantly. The older 4AT requires a full 8 liters, while a recent change for a 2012 1.6L automatic model used 5.7 liters. The newer 6AT typically requires between 5.3-5.8 liters. The safest approach is to check your vehicle's maintenance manual or provide the VIN to parts suppliers for verification. Remember to select oil with the correct certification standard, such as MERCON-LV for DCT transmissions, as using the wrong oil can cause jerking.

Was this review help?
5
2
Share
Expand All
IvanRose
10/25/25 5:20am

Last week, I helped my neighbor replace the transmission fluid for a 2013 Focus. The actual drained old fluid measured 4.9 liters, and it took 5.2 liters of new fluid to reach the standard level. The fluid replacement volume for automatic transmissions varies significantly - the 1.6L engine with dual-clutch typically requires 4.5-5 liters, while the 2.0L models need about 0.3 liters more. Repair shops using fluid exchange machines for circulation cleaning should prepare 12 liters, but this thorough fluid replacement delivers excellent results. Reminder: The filler port is located inside the left front wheel. DIYers should prepare a ratchet wrench and special fluid filler tool. After refilling, remember to check the fluid level with the engine warmed up.

Was this review help?
15
2
Share
Expand All
DeMadeline
12/08/25 5:44am

The transmission fluid volume is directly related to the oil change method. Gravity drain: 1.5-2L for manual transmissions, 4.5-6L for automatic transmissions; Machine flush: 8-12L for automatic transmissions. The 2010 Focus owner's manual specifies 7.3L for automatic transmissions including radiator line capacity. Recommended change interval is every 60,000 km using OEM WSS-M2C938-A certified fluid. After changing, cycle through all gears to circulate the fluid.

Was this review help?
6
5
Share
Expand All
More Forum Discussions

Which country does Fiat belong to?

Fiat is an Italian brand. Additional information: Fiat Automobiles (Fabbrica Italiana Automobili Torino, abbreviated as F.I.A.T.), a renowned Italian automobile manufacturer, is one of the world's top ten car companies. Established in 1899, its headquarters is located in Turin, the capital of the Piedmont region and Italy's industrial center. With over a century of history, Fiat has been regarded as a creator of perfect automobiles. Its famous brands include: Fiat, Chrysler, Jeep, Dodge, Ferrari, Maserati, Alfa Romeo, Lancia, Dodge RAM, SRT, Abarth, New Holland, and Fiat Professional.
18
5
Share

Where to Adjust Car Rearview Mirrors?

The electric rearview mirror adjustment button is located on the door to the left of the driver's seat, featuring a large circular knob. Observe the white dot on the adjustment knob and the letters beside it: L stands for the left rearview mirror, and R stands for the right rearview mirror. Relevant information about car rearview mirrors is as follows: 1. Location: Car rearview mirrors are positioned on the left and right sides of the car's front and inside the car's front. 2. Function: Car rearview mirrors reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly. They serve as the 'second pair of eyes,' expanding the driver's field of vision.
10
3
Share

What are the consequences of a faulty car throttle valve?

Effects: It can cause engine shaking, insufficient power, and excessive fuel injection. Throttle valve failure can lead to engine shaking, but engine shaking is not necessarily caused by throttle valve failure. There are many reasons for engine shaking, which may be due to problems in the intake system, fuel system, or ignition system. 2. Common issues in the intake system: First, excessive impurities in the throttle valve and intake manifold can prevent the onboard computer from accurately controlling the idle intake air volume. Second, the air-fuel mixture may be too rich or too lean, usually due to intake manifold leaks. Fuel system problems are often caused by the use of low-quality gasoline, leading to fuel pump blockages or incomplete combustion of the air-fuel mixture in the cylinders, which can also cause engine shaking.
2
3
Share

Where are the drainage holes located on the Porsche Cayenne?

Porsche Cayenne's sunroof drainage holes are located at the front side of the two A-pillars near the front wheels. Below is more information about the Cayenne: Exterior: The Porsche Cayenne features a stylish and sporty appearance, with smooth and complete body lines that exude a strong athletic vibe. The interior craftsmanship is refined, and the vehicle is well-equipped. The seats offer excellent comfort, and thoughtful features such as the heated steering wheel and armrest design next to the seats enhance the overall driving experience. Space: The Porsche Cayenne provides a relatively spacious interior with abundant and practical storage compartments. However, the trunk space is slightly smaller compared to other vehicles in its class.
5
0
Share

What is the normal tire pressure for the Bora?

Volkswagen Bora's normal tire pressure range is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. The Bora uses an indirect tire pressure monitoring system. This type of tire pressure monitoring device does not display the tire pressure but only alerts when the tire pressure is abnormal. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the tire pressure gauge against the tire valve to measure and read the value. Remember to replace the valve cap after measuring the tire pressure. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Generally, the system will alert if the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply perform a tire pressure reset in this situation. Damaged tire pressure sensor. The tire pressure sensor, which is used to monitor tire pressure, is installed inside the tire and connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it can also cause the tire pressure warning light to come on. For sensor damage issues, the only solution is to replace it with a new component.
6
1
Share

What Causes Intermittent Idle Vibration in a 6-Cylinder BMW?

Intermittent idle vibration in a 6-cylinder BMW may be caused by engine mounting issues, typically related to the engine mounts and rubber bushings. These components are responsible for absorbing minor vibrations during engine operation. If they malfunction, these vibrations can transfer to the steering wheel and cabin, causing noticeable shaking during idle. Additional details are as follows: Wheel Balancing: A car's wheel is an integrated unit composed of the tire and rim. However, manufacturing tolerances mean mass distribution across this unit may not be perfectly uniform. When wheels rotate at high speeds, this can create dynamic imbalance, resulting in wheel vibration and steering wheel oscillation during driving. To prevent or correct this condition, counterweights are added to dynamically balance the wheel by equalizing mass distribution across its circumference. This correction process is commonly known as wheel balancing.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.