How many liters of transmission oil does a Focus manual transmission need?

1 Answers
VonFernando
07/29/25 9:15pm
The manual transmission of a Focus requires 1.6 liters of transmission oil. Below is the relevant introduction: Focus: The Ford Focus family is built on Ford's all-new mid-size car platform, integrating Ford's strong R&D capabilities and the collective wisdom of its global engineering design team. With world-leading powertrain technology, racing-grade chassis tuning, stylish and sporty exterior design, and cutting-edge intelligent technology, it delivers exhilarating driving pleasure and sets a new benchmark for driving fun in the mid-size car segment. Driving Modes: The Ford Focus Active Wagon offers even better off-road capability, with an approach angle of 17 degrees, a departure angle of 21 degrees, and a minimum ground clearance of 165mm. Additionally, with the support of five driving modes—Normal, Eco, Sport, Slippery, and Rough Road—the Focus Active Wagon can handle various road conditions with ease.
Was this review help?
9
3
Share
More Forum Discussions

What is the reason why the Surui one-button start makes a sound but then doesn't respond?

The reason why the Surui one-button start makes a sound but then doesn't respond is that the internal motor of the steering lock is stuck, causing insufficient induction and preventing the car from starting. Relevant information about the Surui is as follows: 1. Power: The Surui is equipped with a TI power engine that combines turbocharging and direct fuel injection technology. The new power system will significantly improve the overall vehicle performance. Looking at the domestic car market, consumers have a strong preference for "T" power, and the letter "T" embedded at the rear of the car has gradually become a symbol of high technology, strong power, and more fashion. With the launch of the BYD G6 featuring "TID" technology, the "T stage" is no longer dominated by Volkswagen alone, as BYD has become the first domestic car brand to master world-class commercial engine technology. 2. Exterior: The Surui's front face features a dual-chrome strip design that blends seamlessly with the crystal-clear willow-leaf combination headlights; the diamond-contour taillights perfectly connect with the waistline that runs from front to rear, making the body more harmonious, smooth, dynamic, and stylish. It is reported that the full-body outer covering sheet metal molds of the Surui are designed and produced by Japan's Ogihara factory, and its main welding line also adopts advanced patented technology from Germany's ABB company, with welding performed by robots, achieving a higher level of craftsmanship. The Surui's body dimensions of 4680mm × 1765mm × 1490mm and an ultra-long wheelbase of 2660mm outperform its peers, creating a more spacious and comfortable driving space, placing it in the A+ class sedan category.
2
1
Share

What are the differences between the Nissan Patrol Y61 and Y62?

Nissan Patrol Y61 is the fifth generation of the Patrol series, while Y62 is the sixth generation. The following are the specific differences between the Nissan Patrol Y61 and Y62 models: 1. Exterior: There is a significant difference in the exterior design between these two models. The Nissan Patrol Y61 features a predominantly straight-line design, giving the vehicle a more angular and boxy appearance. In contrast, the Y62 model, introduced in 2010, has a more rounded and modern design, making it noticeably more stylish than its predecessor. 2. Spare Tire Position: The Y61 has a rear-mounted spare tire with a split tailgate design, while the Y62 features an underbody-mounted spare tire.
12
3
Share

What Are the Differences Between New and Used Cars?

New cars are purchased from car dealerships and are vehicles that come directly from the production line. Used cars are vehicles that have been registered for the first time and then transferred, possibly multiple times. 1. Different Definitions: (1) New cars mainly refer to vehicles purchased for the first time from a dealer, including those whose transfer count is also the first. These vehicles are bought directly from the production line, and after registration, ownership is designated to the first owner. (2) Used cars, by definition, are vehicles transferred from previous owners, so the transfer count is generally two or more. Professionally, they are also referred to as 'pre-owned vehicles,' primarily indicating motor vehicles that have not reached the state-mandated scrapping time and can still be used. Transferring a used car represents the transfer of ownership, disposal rights, and other powers. 2. Different Purchase Channels: New cars are those seen in traditional 4S stores. The purchase channels for used cars are more diverse than for new cars. Car enthusiasts can choose used cars from various channels such as used car markets, private sellers, and vehicle auction transactions.
12
0
Share

How to Check if ETC is Successfully Activated?

There are two ways to check whether the ETC has been activated: Simply insert the ETC card into the ETC electronic tag, and you can click to view after insertion. If the ETC card account balance is displayed, it means the activation is successful. When passing through the ETC lane, a beep sound indicates successful deduction, the barrier will automatically rise, and it can be used normally. The ETC installation process is as follows: Upon receiving the device, first check whether the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Sign Invalid, Please Insert Card," indicating the device is normal. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the protective film of the OBU back adhesive and stick it to the installation position. Press with your hand for 2-3 minutes to remove air bubbles. Insert the ETC card with the front facing the driver and the back facing the front glass. The chip should be inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost-saving: Reduces expenses, decreases the frequency of vehicle starts and brakes, lowers wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: The efficiency of passing through ETC lanes can theoretically increase by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
2
5
Share

What are the differences between the Mercedes-Benz V260 and the Mercedes-Benz Vito?

Both the V260 and the Vito are MPV models under Fujian Mercedes-Benz. The main differences between the Mercedes-Benz V260 and the Mercedes-Benz Vito are as follows: 1. Wheel Braking System: The Vito features ventilated disc brakes for both front and rear brakes, with a foot-operated parking brake. The tire sizes are 235/55 R17 for both front and rear. The V260, on the other hand, has ventilated disc brakes for the front and regular disc brakes for the rear. Its parking brake differs from the Vito, utilizing an electronic parking brake system. The tire sizes are 245/50 R18 for both front and rear. 2. Driving Assistance Configurations: The V260 model is equipped with features such as driving mode switching, automatic parking, rearview camera, and adaptive cruise control, which are not available in the Vito model.
14
2
Share

What speed can the Hornet 250 reach in first gear?

The Hornet 250 can reach over 60 in first gear and a bit over 100 in second gear. The Hornet is a high-revving machine, requiring up to 18,000 RPM in second gear to reach 100. The gear positions and starting method for the Hornet 250 are as follows: Gear positions of the Hornet 250: Currently, there are mainly two types of gear positions: the rotary gear and the sequential gear (international gear). The rotary gear cycles through 0-1-2-3-4-5-0, while the international gear is 1-0-2-3-4-5 without cycling, with neutral located between first and second gear. Starting method for the Hornet 250: After starting the engine, engage first gear, slowly release the clutch lever while gently applying the throttle, coordinating both actions until a smooth start is achieved. Once the engine is started, it should be preheated for 3-5 minutes before moving. Engine preheating is an essential task, especially in low ambient temperatures, but avoid revving the throttle excessively to speed up the preheating process.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.