How many liters of transmission oil are needed for a Volkswagen Touran transmission oil change?

Will Changing Tires Affect the Tire Pressure Monitoring System?

Changing tires does not affect the tire pressure monitoring system because the sensors of the tire pressure monitor are placed on the wheel hubs. After changing tires, the tire pressure monitoring system can still accurately detect the tire pressure. There are three commonly used methods of tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data for each tire is displayed. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure of a tire decreases, the weight of the vehicle causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above, equipping direct sensors in two diagonally opposite tires and incorporating a 4-wheel indirect system. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data of the actual pressure in all four tires as a direct system does.

5

4

Share

Symptoms of Engine Misfire?

Automobile engine misfire manifests as: 1. Unstable idling and abnormal engine vibration; 2. Significant power reduction; 3. Difficulty starting the vehicle and engine prone to stalling; 4. Black smoke emitted from the exhaust pipe. The primary causes of engine misfire stem from the ignition system and fuel injection system. Severe burning of the contacts in the distributor cap of the ignition system can cause spark jumping, mostly occurring between corresponding terminals on the cap, leading to erratic idling and severe power loss. Faulty ignition coils can also result in misfire, often causing severe burning of the distributor cap. Issues with the ignition coil most commonly lead to sudden severe power loss and engine stalling.

3

2

Share

Where is the camshaft located?

The camshaft can be positioned in three ways: lower-mounted, middle-mounted, and overhead-mounted. In a lower-mounted valve train, the camshaft is located in the crankcase. In a middle-mounted valve train, the camshaft is positioned in the upper part of the engine block. In an overhead-mounted valve train, the camshaft is situated on the cylinder head. Most mass-produced vehicles today are equipped with overhead camshaft engines. Additional relevant information is as follows: 1. Camshaft arrangement: Common drive methods between the camshaft and crankshaft include gear drive, chain drive, and toothed belt drive. Lower-mounted and middle-mounted camshafts typically use cylindrical timing gears for driving the crankshaft, usually requiring only one pair of gears. If the gear diameter is too large, an additional idler gear can be added. To ensure smooth meshing and reduce operational noise, helical gears are commonly used for timing gears. 2. Chain drive: Chain drive is often used between overhead camshafts and the crankshaft, but its reliability and durability are inferior to gear drive. Toothed belts have replaced drive chains in many high-speed engines due to their quieter operation, reliability, and lower cost. However, some high-power engines still use chain drives. For double overhead camshafts, the exhaust camshaft is typically driven by the crankshaft via a toothed timing belt or chain, while the intake camshaft is driven by the exhaust camshaft through a metal chain. Alternatively, both intake and exhaust camshafts may be driven directly by the crankshaft through a toothed belt or chain.

8

5

Share

Is it worth buying a used Dongfeng A9?

Dongfeng A9 used cars are worth considering. Here are some key details about the Dongfeng A9: 1. Interior: The overall design of the Dongfeng A9 shares some similarities with the Peugeot New 408, but the use of wood-grain trim and refined details creates a more business-oriented atmosphere. Notably, the dashboard features a quartz clock at the top and a large LCD display at the bottom. 2. Powertrain: The car is equipped with a 1.8T turbocharged engine, delivering a maximum output of 204 horsepower and a peak torque of 280 N·m. It is paired with a 6-speed automatic transmission.

19

5

Share

How to reset the maintenance reminder for Dongfeng Fengdu MX5?

You can manually reset it by pressing the reset button, or have a professional use a computer to reset it. Here is some related information: 1. Introduction: Dongfeng is a brand under the FAW Group, a central enterprise directly supervised and managed by the State-owned Assets Supervision and Administration Commission of the State Council, and belongs to the FAW Group. 2. History: Production began on May 5, 1958. Chairman Mao Zedong was proud of Dongfeng's production. The birth of Dongfeng cars ended one chapter of Chinese history and created another. 3. Development: In April 2019, Dongfeng led a Series A3 financing round of tens of millions of dollars for AutoX.

10

3

Share

How to Adjust the Height of a Car Clutch?

To adjust the height of a car clutch, follow these steps: 1. Turn off the engine, engage the handbrake, and shift to neutral; 2. Lie down in the driver's footwell area and remove a plastic cover with lighting by pushing it toward the front of the car, then pulling it downward in the opposite direction to detach it—be careful not to damage the mood light wiring inside; 3. Use an open-end wrench to loosen the adjustment nut counterclockwise, then adjust the height (clockwise to lower, counterclockwise to raise); 4. After adjustment, test drive the vehicle. If satisfied, tighten the nut clockwise to secure the screw and reinstall the plastic cover. Important notes: Clutches are categorized as mechanical (adjustable) or hydraulic (non-adjustable).

16

5

Share

How many liters of transmission oil are needed for a Volkswagen Touran transmission oil change?

Will Changing Tires Affect the Tire Pressure Monitoring System?

Symptoms of Engine Misfire?

Where is the camshaft located?

Is it worth buying a used Dongfeng A9?

How to reset the maintenance reminder for Dongfeng Fengdu MX5?

How to Adjust the Height of a Car Clutch?

Can I replace my lost driving test archive for Subject 4?

What Does 'Explosive Modification' Mean?

Do Carbon Ceramic Brake Discs Experience Thermal Fade?

What Causes Engine Failure?