How Many Liters of Transmission Fluid Should Be Added to a Car?

1 Answers
LaJoanna
07/30/25 1:55am
Approximately 4 liters of transmission fluid should be added to a car. Transmission fluid is a lubricant used to keep the gear system clean, and its functions include: 1. Ensuring the normal operation of the transmission and extending the lifespan of the transmission components; 2. Providing effective lubrication at low temperatures; 3. Reducing fluid loss under harsh operating conditions. The method for replacing car transmission fluid is as follows: 1. Remove the drain plug at the bottom of the transmission to drain the old fluid; 2. Remove the inner and outer transmission covers; 3. Take out the transmission fluid filter; 4. Remove the oil pan gasket and clean the surrounding stains; 5. Wipe the cleaned transmission fluid filter with cotton thread; 6. Add the new fluid and complete the installation.
Was this review help?
7
4
Share
More Forum Discussions

Which is more powerful, the Audi RS6 or RS7?

The RS6 Avant is equipped with a 4.0TFSI engine, delivering 605ps horsepower, with a measured 0-100km/h acceleration time of just 3.6 seconds. The Audi RS7 features a 4.0TFSI V8 twin-turbocharged direct-injection engine, with a 0-100km/h acceleration time of 3.9 seconds. From this, it's clear that the RS6 is the more powerful model. Additional details: Superior space performance: The Audi RS6 measures 4987mm in length, 1936mm in width, and 1456mm in height, with a wheelbase of 2920mm and a curb weight of 2070kg. For a performance car, it's relatively large, but the RS6's combination of wagon practicality and performance makes it truly stand out. While the Mercedes-Benz E63 AMG Estate offers similar performance and family-friendly attributes, it's not available for sale in China, which further enhances the value of the Audi RS6.
19
1
Share

What are the functions of Audi Matrix headlights?

Matrix headlights are highly intelligent. These headlights can accurately illuminate the road ahead under any conditions without dazzling the eyes of oncoming drivers. The functions of matrix headlights are as follows: 1. Matrix LED headlights consist of multiple LED lights, and each individual LED light source can be independently turned on, dimmed, or turned off. With a sufficient number of LEDs, matrix LED light groups can even combine millions of lighting configurations. For example, the Audi A8 can detect the light from matrix LED headlights to avoid the lights of oncoming vehicles, and can flash three times in succession to warn pedestrians, among other functions. 2. With individually controllable LEDs, matrix headlights can very accurately illuminate the road ahead in all situations without causing glare to other road users. This effect is achieved by dividing the high beam into different segments, and a camera can monitor whether vehicles are approaching or moving forward. The activation speed for matrix headlight technology is 30 km/h when driving in suburban areas and 60 km/h when driving on urban roads.
9
1
Share

What are the differences between Lavida and Santana?

The differences between Lavida and Santana are as follows: 1. Vehicle power: (1) Santana is equipped with a 1.5L naturally aspirated engine across the entire lineup, with a maximum horsepower of 110 hp, maximum power of 81 kW, and maximum torque of 150 N・m. (2) Lavida offers a choice of a 1.5L naturally aspirated engine, a 1.2L turbocharged engine, and a 1.4L turbocharged engine. The 1.2L turbocharged engine delivers a maximum horsepower of 116 hp, maximum power of 85 kW, and maximum torque of 200 N・m. The 1.4L turbocharged engine provides a maximum horsepower of 150 hp, maximum power of 110 kW, and maximum torque of 250 N・m. 2. Body dimensions: (1) Santana has body dimensions of 4475*1706*1469 mm. (2) Lavida has body dimensions of 4670*1806*1474 mm.
7
1
Share

What are the consequences of increasing horsepower in a diesel direct injection engine?

If the horsepower of a diesel direct injection engine is increased, it can lead to excessive exhaust emissions and increased fuel consumption. Below is an introduction to increasing horsepower in a diesel direct injection engine: 1. The ECU of a car engine: Car engines are equipped with an ECU, which is referred to as the brain of the engine. The ECU controls the operation of the engine. There are many sensors around the car's engine that can collect data and feed it back to the ECU. After processing, the ECU uses actuators to control the engine's operation. Without the ECU, the engine cannot run. 2. Increasing horsepower: Increasing horsepower essentially involves reprogramming, which means modifying the control program in the ECU. This can alter the engine's power output. However, after reprogramming, while horsepower increases, the vehicle's exhaust emissions and fuel consumption will also rise. Using the original factory program ensures a balance between power, fuel economy, and engine lifespan.
1
5
Share

What Are the Standards for Vehicle Purchase?

The vehicle purchase tax standards are divided into two categories: new energy vehicles and conventional motor vehicles. New energy vehicles are exempt from purchase tax, while conventional motor vehicles are subject to a 10% purchase tax. Currently, the calculation method for the purchase tax is: vehicle sales invoice price ÷ 1.17 (VAT) × 10% (purchase tax percentage) = vehicle purchase tax amount. With the increasing national emphasis on environmental protection and energy conservation, new energy vehicles are receiving more attention, not only with higher lottery probability for new energy vehicle license plates but also favorable purchase tax policies. The following types of new energy vehicles are exempt from purchase tax: 1. Pure electric vehicles, plug-in hybrid vehicles (including extended-range vehicles), and fuel cell vehicles that are licensed for sale in China. 2. Vehicles that meet the technical requirements for new energy vehicle products. 3. Vehicles that pass the special inspection for new energy vehicles and meet the special inspection standards for new energy vehicle products.
7
4
Share

What kind of Nissan car is the Teana?

Teana is the Nissan Altima. The Altima is a flagship mid-to-high-end luxury sedan under the NISSAN brand. With cutting-edge technology, the Altima perfectly combines precise driving control engineering and (absolute comfort engineering), bringing the design concept of mid-size sedans to a new level. Additional information: The name 'Teana' originates from an indigenous American language, meaning 'dawn,' symbolizing the emergence of Nissan's new generation of large and mid-size sedans. One of the most notable features of this car is its interior that reflects modern lifestyle tastes, with extensive use of wood grain trim panels. The dashboard, seats, and armrests are adorned with ample amounts of lambskin. Large-sized instrument panels and the arc-shaped design of the seats and the center console between the rear seats also add to the luxury. Designer Kei Nakajima even believes that the Altima starts with its interior, focusing on creating the concept of 'modern living.'
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.