How Many Liters of Transmission Fluid Does the Mazda6 Require?

1 Answers
Molly
07/28/25 7:21pm
Mazda6 transmission fluid requires approximately 4-5 liters. Below are the detailed specifications of the Mazda6: 1. Body Dimensions: The Mazda6 is a mid-size car under the Mazda brand. It has a wheelbase of 2675mm, with length, width, and height dimensions of 4670mm, 1780mm, and 1435mm, respectively. 2. Powertrain Configuration: This model is equipped with two engines: a 2.0L naturally aspirated engine and a 2.3L naturally aspirated engine. The 2.0L naturally aspirated engine delivers 147 horsepower and a maximum torque of 183 Nm, with a maximum power output at 6500 rpm and peak torque at 4000 rpm. It is paired with either a 6-speed manual transmission or a 5AT transmission. The 2.3L naturally aspirated engine produces 163 horsepower and a maximum torque of 204 Nm, with a maximum power output at 6500 rpm and peak torque at 4000 rpm. It is matched with either a 5AT transmission or a 6-speed manual transmission. 3. Suspension Configuration: The Mazda6 features a double-wishbone independent front suspension and a multi-link independent rear suspension.
Was this review help?
12
1
Share
More Forum Discussions

What should you do after driving a vehicle into a railway crossing?

After entering the crossing, maintain a low speed (2nd to 3rd gear) and avoid shifting gears. Below are the specific requirements after entering a railway crossing: 1. Manned or unmanned: Railway crossings are divided into manned and unmanned types. When approaching a manned crossing, follow the instructions of the railway crossing personnel and pass in order. When approaching an unmanned railway crossing, first reduce the vehicle's speed and observe whether there are traffic signals ahead. If there are signals, pass according to them. For railway crossings without signals, always adhere to the principle of 'look first, slow down second, and pass third.' 2. Precautions: Regardless of whether the crossing is manned or unmanned, or whether there are signals, always reduce speed in advance when driving a motor vehicle into a railway crossing, keeping the vehicle below the 30 km/h limit stipulated by traffic safety laws. If driving a manual transmission vehicle, shift into a low gear when entering the crossing, steady the throttle to prevent stalling, and keep both hands firmly on the steering wheel to prevent the vehicle from skidding when crossing the railway tracks. Ensure the vehicle passes at a steady speed. For vehicles without gears, steady the throttle and keep both hands firmly on the steering wheel to pass at a steady speed.
10
1
Share

Why can't the Honda Envix be used for Didi?

Because this model does not meet the entry vehicle standards of the region, as different regions have varying requirements for eligible vehicles. The Honda Envix is a compact sedan under the Honda brand, equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.0-liter turbocharged engine. Specific details are as follows: 1. The model with the 1.5-liter naturally aspirated engine is a hybrid version: The 1.5-liter naturally aspirated engine delivers 109 horsepower and a maximum torque of 134 Nm, with a maximum power output at 6000 rpm and peak torque at 5000 rpm. This engine features i-VTEC technology and multi-point fuel injection, and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 96 kW and a maximum torque of 267 Nm. 2. The 1.0-liter turbocharged engine: The Honda Envix's 1.0-liter turbocharged engine produces 122 horsepower and a maximum torque of 173 Nm, with maximum power at 5500 rpm and peak torque between 2000 and 4500 rpm. This engine is equipped with direct fuel injection technology and also uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT transmission.
3
5
Share

Can Michelin Tires with Cracks Continue to Be Used?

Michelin tires with cracks should be replaced promptly. As soon as tires become hardened or develop cracks, they should be replaced immediately, and they should not be used on highways. Tires are rubber products, and any rubber material will age over time, leading to hardening and cracking in tires. Aged tires have reduced grip, longer braking distances, and make vehicle braking harder to control. Moreover, cracked tires are prone to blowouts at high speeds, which is extremely dangerous. Therefore, for safety reasons, it is necessary to replace the tires as soon as possible. Below are some tire maintenance methods: 1. Perform wheel alignment and tire rotation: Conduct wheel alignment and tire rotation every 10,000 kilometers. 2. Regularly check tire pressure: Tire maintenance also includes periodic pressure checks. Tires with pressure exceeding the specified range will significantly reduce their lifespan, while those below the specified pressure will result in poor braking performance, difficulty or heaviness in steering, and also decrease tire lifespan. 3. Always pay attention to the tread wear indicators: The tread wear indicators are located in the main grooves of the tire and appear as trapezoidal rubber blocks. When the tire tread wears down to the level of these indicators, the tire must be replaced. During the rainy season, to prevent the vehicle from slipping on wet surfaces, the tread depth must be maintained at least 3mm.
9
3
Share

What are the precautions for vehicles passing through waterlogged roads?

Precautions for vehicles passing through waterlogged roads: 1. Slow down: Regardless of the road width or condition, drive slowly in the rain, always observe the distance between vehicles ahead and behind, and be mentally prepared to take various emergency measures. Visibility is low in rainy conditions, and the vehicle's emergency performance, such as braking distance, is reduced. Therefore, slow down in advance to leave enough time and space to handle situations and ensure safety. 2. Maintain distance: Rainy conditions obstruct visibility, so it's important to maintain a safe distance between vehicles and continuously monitor the distance ahead and behind. Stay especially far away from large vehicles, as they can block your view, and the water depth they can pass through may not be safe for smaller vehicles. Additionally, large vehicles can splash water, disrupting smaller vehicles. 3. Use fog lights in rainy conditions: Make full use of fog lights to enhance driving safety in the rain. If necessary, turn on hazard warning lights to ensure that vehicles behind are always aware of your movements. 4. Do not restart the engine if it stalls: In heavy rain or storms, some road sections may become severely waterlogged in a short time. If you must drive through water, use a low gear and maintain a steady speed. If the vehicle stalls, do not attempt to restart it immediately, as this may cause severe engine damage. Instead, contact a professional repair shop promptly. Only after a technician has inspected the vehicle and confirmed it is safe should you restart it.
12
5
Share

What is the maintenance interval for the Geely Boyue?

The maintenance interval for the Boyue is 5,000 kilometers. The first maintenance for this vehicle is due at 5,000 kilometers or three months, whichever comes first. After the first maintenance, it should be serviced every 10,000 kilometers. Additional details are as follows: 1. There are two indicators for the first maintenance of a car: These are time and mileage. If the car's mileage has not exceeded 5,000 kilometers, but the usage time has exceeded three months, maintenance should be performed promptly in such cases. 2. Car maintenance is divided into two types: major and minor: The minor maintenance interval is three months or 5,000 kilometers, while the major maintenance interval is 40,000 kilometers. Regardless of the vehicle model, regular maintenance is essential to keep the car in optimal working condition. 3. Minor maintenance: Primarily involves changing the engine oil and oil filter. 4. Major maintenance inspection items: Mainly include replacing the engine oil, oil filter, air filter, cabin air filter, fuel filter, brake fluid, transmission fluid, spark plugs, etc.
12
5
Share

What are the differences between the Audi A4L Progressive and Fashion models?

The Progressive model comes with 225/50R17 tires, while the Fashion model features 245/40R18 tires. Features such as rearview camera, automatic parking, and full LCD instrument panel are optional for the Progressive model but standard for the Fashion model. The Fashion model's LCD instrument panel measures 12.3 inches. Below are some key details about the Audi A4L: 1. Exterior: The Audi A4L measures 4818/1843/1432mm in length, width, and height, with a wheelbase of 2908mm. It features a new hexagonal grille design and sharp headlight clusters. 2. Interior: The dashboard is tilted towards the driver's side, and higher trim levels include a full LCD instrument panel. 3. Powertrain: The A4L is equipped with a 2.0T engine (low/high power) and a 1.4T engine. The 2.0T engine delivers maximum power of 140kW (190hp) and 185kW (252hp), with the low-power 2.0T model labeled as 40TFSI and the high-power 2.0T model as 45TFSI. The 1.4T engine produces a maximum power of 110kW (150hp).
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.