How Many Liters of Transmission Fluid Does a Toyota Levin Require?
3 Answers
Generally, a manual fluid change requires 4-6 liters, while a machine-assisted fluid change requires approximately 9-12 liters. Transmission fluids are categorized into automatic transmission fluid (ATF) and manual transmission fluid (MTF). ATF should be replaced every two years or after driving 60,000-80,000 kilometers, whereas MTF should be replaced every three years or after driving 80,000-100,000 kilometers. Below are maintenance tips for automatic transmissions: 1. Regularly check the automatic transmission fluid level: Start the engine and warm up the transmission fluid to around 50°C. Then, shift the gear selector through each position, holding for 2 seconds each, before placing it in park. The fluid level on the dipstick should be between the maximum and minimum marks. If it is insufficient, promptly add fluid of the same specification. 2. Adhere to the recommended transmission fluid replacement interval: Most automatic transmissions require fluid changes every two years or 40,000-60,000 kilometers (refer to the vehicle's owner's manual for exact specifications). It is advisable to change the fluid 2,000-3,000 kilometers earlier than the recommended interval.
I drive a Levin 1.8L hybrid version. Last time when I changed the CVT transmission fluid at the 4S shop, the technician said it required exactly 4 liters. However, the amount varies for different models. The regular 1.2T version needs about 3.8 to 4.2 liters, while the manual transmission requires less, approximately 2.5 liters. It's advisable to prepare an extra 0.5 liter for flushing during the actual fluid change. I recommend using Toyota's genuine CVTF FE fluid and avoiding cheap off-brand products. I change it every 60,000 kilometers, and it's better to service earlier if you frequently encounter city traffic congestion. After the fluid change, I noticed significantly smoother gear shifts and more stable fuel consumption.
Having changed transmission fluid for dozens of Levin vehicles in the workshop, CVT models typically require around 4 liters, while the 1.5L three-cylinder engine may need 0.2 liters less. Precise control is crucial during operation - excessive fluid can cause foaming and damage the valve body, while insufficient amounts lead to inadequate lubrication. Before adding new fluid, old fluid must be cycled out using equipment, totaling 5 liters in usage but only retaining 4 liters. It's recommended to bring the vehicle manual to the shop for model matching, as hybrid versions have different fluid temperature requirements compared to regular versions - never exceed the maximum fill level. After replacement, conduct a test drive to check for abnormal noises before considering the job complete.
