How Many Liters of Power Steering Fluid Are Needed for Replacement?

How Long Can Toothpaste Maintain the Effect of Removing Car Scratches?

Using toothpaste to remove car scratches will be washed away by the next heavy rain. The abrasive components in toothpaste provide a similar effect to car wax, offering a simple protective layer that can prevent rusting in the short term. Since toothpaste is not specifically designed for repairing car scratches, it will not permanently adhere to the scratches. Car polishing can effectively remove scratches, address issues like oxidation, dullness, and lack of gloss in the car paint, and handle most scratch problems. Additionally, car polishing can clean the car body, effectively removing dirt and corrosive substances, restoring the cleanliness of the paint. Polishing the car body before waxing or sealing can enhance the results and prolong the maintenance period. Another method is using a touch-up pen to color the scratches. For deeper scratches, it is necessary to apply a primer before the touch-up paint. The steps include waxing, sanding, and cleaning. When waxing, avoid using too much wax—just enough to cover the damaged area of the paint. Nail polish can also be used to fill in scratches on the car's paint. After cleaning and drying the scratched area, apply nail polish of the same color as the car paint evenly over the scratch and let it dry for about 30 minutes.

13

4

Share

Can Secondary Ignition Be Detected?

Secondary ignition can be detected. If the vehicle stalls after driving through water and someone manually uses the starter to ignite and operate the engine, this is considered a secondary start. Precautions for driving through water are as follows: When encountering standing water on the road, slow down and assess the water level. If the water reaches two-thirds of the tire height, driving through it poses a certain risk, and it is advised not to force passage. Maintain a low speed when driving through water, as higher speeds can raise the water level, increasing the actual depth of the water. Additionally, ensure you do not stop, shift gears, or reduce throttle, maintaining medium-to-high throttle at low speed to pass through. If the engine stalls while driving through water, do not attempt to restart it. In such cases, it is likely that water has entered the engine, and restarting will only cause more severe damage.

10

1

Share

Why is Secondary Ignition Not Covered by Insurance?

Secondary ignition is considered a human-caused factor, and vehicle damages resulting from human causes are not covered by the insurance policy. Below is relevant information about secondary ignition: Introduction: During water wading, if water blocks the air intake and causes the vehicle to stall, attempting to restart the engine is referred to as secondary ignition. Precautions: It is important to note that even if the water on the road has receded, you should avoid attempting to restart the engine, as there may still be water in the intake pipe, and electrical systems may malfunction after being submerged. The best course of action is to contact a towing company. Do not try to save on towing fees at the risk of causing greater damage. When arranging for a tow, clearly communicate to the staff that the vehicle stalled during water wading. For easier towing, the towing company may shift the gear to neutral. Without understanding the situation, they might attempt to start the engine, so it is crucial to explain the circumstances clearly.

20

3

Share

What is the sequence for rotating car tires front to back?

Here is the introduction to the sequence for rotating car tires front to back: 1. Move the left front tire to the left rear position. 2. Move the right front tire to the right rear position. 3. Move the left rear tire to the right front position. 4. Move the right rear tire to the left front position. 5. Regular tire rotation ensures more even wear across all four tires. Tires are one of the most important components of a car, and their functions are as follows: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and off-road performance. 3. Work with the car's suspension to cushion impacts during driving and dampen resulting vibrations. 4. Protect car components from severe vibrations and early damage, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and fuel economy.

9

0

Share

What are the differences between Junling and Kangling?

There are three main differences between Kangling (i.e., Jianghuai Kangling) and Junling (i.e., Jianghuai Junling). The specific differences between Kangling and Junling are as follows: 1. Different characteristics: (1) Features of Jianghuai Kangling: Jianghuai Kangling integrates sedan-like design concepts and manufacturing processes into economical light trucks, ensuring that domestic economical light trucks not only have good economic performance but also offer comfort, safety, and environmental friendliness, thereby elevating the quality and grade of domestic economical light trucks. (2) Features of Jianghuai Junling: As a cost-effective economical light truck, Jianghuai Junling Good Luck adopts the Isuzu 100P high-roof cab and large-curved windshield, providing an attractive appearance and broad visibility for safer driving. 2. Different tonnage: (1) Tonnage of Jianghuai Kangling: Kangling is a 1-1.5-ton grade product of Jianghuai light trucks. (2) Tonnage of Jianghuai Junling: The tonnage of Jianghuai Good Luck ranges from 0.7 tons to 2 tons. 3. Different uses: (1) Use of Jianghuai Kangling: Suitable for mid-range light trucks in short-distance and economically developed regions, with different power segments tailored to meet various transportation needs in rural markets. (2) Use of Jianghuai Junling: To adapt to the development of the individual economy, Jianghuai Junling light trucks timely launched the Junling mid-size light truck, mainly targeting the medium and short-distance intercity logistics market.

20

5

Share

What are the causes of brake light failure?

The causes of brake light failure include the following: 1. Brake system failure: Damage to the brake fluid pipe causing severe oil shortage in the brake system; low oil level in the brake fluid reservoir leading to failure of the float-type sensor, resulting in the brake warning light not illuminating or lighting up to indicate a brake system fault; severe wear of brake pads, pre-buried wire breakage causing brake system failure; the brake warning system itself failing; simple circuit faults such as short circuits and the generation of steam in the brake fluid pipes causing brake system failure. The solution to such brake system failures causing the brake light not to illuminate is to seek professional repair at a maintenance shop. 2. Brake bulb failure: Mainly refers to the brake bulb exceeding its service life, with current halogen brake bulbs having a lifespan of 1~2 years. To solve this type of problem, LED lights can be used instead, with a lifespan of 5~10 years, low power consumption, fast response speed, no delay in lighting up, and being environmentally friendly without pollution. 3. Brake switch failure: Mainly refers to poor contact of the switch behind the brake pedal. The solution for this type of brake light not illuminating is relatively simple—just replace the brake switch.

11

0

Share

How Many Liters of Power Steering Fluid Are Needed for Replacement?

How Long Can Toothpaste Maintain the Effect of Removing Car Scratches?

Can Secondary Ignition Be Detected?

Why is Secondary Ignition Not Covered by Insurance?

What is the sequence for rotating car tires front to back?

What are the differences between Junling and Kangling?

What are the causes of brake light failure?

What does DISP mean in a car?

What is the status when pressing the start button once without stepping on the brake?

Is the Annual Inspection of Commercial-to-Private Vehicles Troublesome?

What is an Automatic Transmission Car?