How many liters of oil should be added to the Corolla Hybrid transmission?

1 Answers
VonAbel
07/30/25 12:06am
Corolla Hybrid transmission oil capacity depends on the replacement method. Generally, manual oil change requires 4-6 liters of oil, while using an oil changer requires about 9-12 liters. Below are the methods for replacing Corolla Hybrid transmission oil: 1. Gravity Drain. Loosen the bottom nut of the transmission oil pan and allow the old transmission oil to drain naturally by gravity. This method is the simplest but cannot completely remove the old transmission oil, as residual dirty oil may remain in mechanical crevices and dead corners. 2. Machine Flush. First, add new transmission oil to the flushing machine, then connect the transmission to the machine via pipes. The new oil will push out the old oil under pressure, resulting in a cleaner oil circuit. 3. Oil Pan Removal. This method provides thorough cleaning from the source and allows for cleaning the transmission oil filter as well.
Was this review help?
1
4
Share
More Forum Discussions

Does the Acura CDX have a hybrid version?

Acura CDX does have a hybrid version. The Acura CDX is positioned as a compact SUV, with body dimensions of 4496mm in length, 1840mm in width, and 1615mm in height, and a wheelbase of 2660mm. In terms of power, it is equipped with a 1.5L L4 turbocharged engine and a 2.0L L4 naturally aspirated engine, paired with an 8-speed dual-clutch transmission and an E-CVT continuously variable transmission. The former delivers a maximum horsepower of 182 and a peak torque of 240 Nm, while the latter produces a maximum horsepower of 145 and a peak torque of 175 Nm. The Acura CDX features 9 optical lenses paired with 9 curved diamond-shaped lenses.
9
1
Share

What are the steps to activate the auto window roll-up feature when locking the Arrizo 5?

Here are the steps to activate the auto window roll-up feature when locking the Arrizo 5: 1. Press the brake pedal, shift the gear lever to P position, release the brake pedal, and press the one-touch start button twice consecutively; 2. Close all doors, press and hold the lock button on the driver's door for more than 10 seconds to complete the lock setting; 3. Roll the window up to the top, release the switch, then press the switch upward again for about three seconds to complete the window roll-up setting. Additional information: Taking the 2020 sport version of the Arrizo 5 as an example, it is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 156ps, a maximum power of 115kw, a maximum torque of 230nm, and is paired with a 5-speed manual transmission.
14
4
Share

What are the differences between gear positions?

Automobile gear positions are distinguished as follows: 1. P gear - Parking gear: When the vehicle needs to be parked for a long time, especially on a slope, it should be shifted into P gear. At this time, the wheels are mechanically locked to ensure the vehicle cannot move while stationary. 2. R gear - Reverse gear: To shift into reverse gear, some vehicles require pressing the safety button on the gear lever before moving it to R gear. It is particularly important to note that R gear cannot be engaged while the car is moving; the vehicle must come to a complete stop before shifting into reverse. 3. N gear - Neutral gear: N gear can be used when the vehicle is just started or being towed, as well as when waiting at signals, in traffic jams, or during brief stops. When shifting into N gear, the handbrake should be firmly applied, and on slopes, the brake pedal should also be pressed to prevent rolling. However, coasting in N gear downhill is prohibited, as it not only fails to save fuel but can also damage the transmission. The neutral gear in automatic transmissions differs significantly from that in manual transmissions. 4. D gear - Drive gear: To start moving, after pressing the brake pedal, shift the gear lever into D gear, then release the handbrake, release the brake, and press the accelerator to move forward. Continue pressing the accelerator as needed to maintain the desired speed. The car will automatically shift between gears 1 to 4 based on the speed. 5. L gear - Low gear: L gear ensures the vehicle remains in 1st or 2nd gear, avoiding increased fuel consumption and wear. 6. S gear - Sport mode: In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPMs for longer periods to deliver instant high torque, thereby increasing the vehicle's power.
10
3
Share

How to Turn Off the Auto Start-Stop Function in Audi?

Audi's method to turn off the auto start-stop function is by pressing the auto start-stop button located below the one-touch start button. Here are the specific details about the auto start-stop function: 1. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a traffic light) during driving. When it's time to move forward again, the system automatically restarts the engine. 2. The working principle of the start-stop system is that when the vehicle stops moving due to congestion or at an intersection, the driver presses the brake pedal and shifts to neutral. At this point, the Start/Stop system automatically checks: the engine is idling and not in gear; the wheel speed sensors of the anti-lock system show zero; the electronic battery sensor indicates there is enough energy for the next start. Once these three conditions are met, the engine automatically stops.
6
0
Share

What brand is the Buick GL6 audio system?

The Buick GL6 audio system is equipped with BOSE speakers. The Buick GL6 has a body length of 4692mm, width of 1794mm, height of 1627mm, and a wheelbase of 2796mm. The Buick GL6 is powered by a 1.3-liter three-cylinder turbocharged engine. The engine delivers a maximum power of 120 kW, a maximum torque of 230 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available between 1800 to 4400 rpm. It is paired with a 6-speed automatic transmission. The Buick GL6 features a MacPherson independent front suspension and a multi-link independent rear suspension.
1
5
Share

What are the common reasons for high fuel consumption in J6P trucks?

J6P trucks may experience high fuel consumption due to the following reasons: Vehicle malfunctions: For example, driving habits (sudden acceleration, hard braking, coasting in neutral, speed and gear mismatch), low tire pressure, use of substandard fuel, ignition system failures, and electronic control system malfunctions. These issues can all increase the vehicle's fuel consumption. Failure to perform regular maintenance: If the vehicle is not maintained on schedule, such as not replacing the air filter, fuel filter, spark plugs, and clutch plates in time, it can also lead to increased fuel consumption. Carbon buildup and electronic control system failures: For example, carbon deposits on the throttle body, idle valve, and fuel injectors, or inaccurate signals from the oxygen sensor, intake pressure sensor, and coolant temperature sensor. These can all affect the vehicle's fuel consumption, and a comprehensive inspection is necessary if the fuel consumption is excessively high.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.