How Many Liters of Manual Transmission Oil Does the Peugeot 308 Require?

1 Answers
ORemington
07/29/25 10:58pm
4 liters is sufficient. The specialized engine oil model for Peugeot 308 maintenance is Total SL5W-30. Below are the relevant details: 1. Engine oil grade classification: The number before 'W' represents the fluidity performance at low temperatures, with a smaller number indicating better starting performance in cold conditions. The number after 'W' indicates the stability performance of the oil at high temperatures (i.e., the likelihood of thinning), with a larger number indicating better stability performance. 2. Precautions: When selecting engine oil, pay attention not only to the quality grade but also to the viscosity grade. First, choose based on performance grade; then, select the viscosity grade according to temperature and load.
Was this review help?
10
4
Share
More Forum Discussions

What to Do When the Third Cylinder of the Engine Misfires?

First, confirm that the third cylinder is not working by pulling off the high-voltage wire to test for spark. The next step is to measure the cylinder pressure. If it is normal, check the fuel injector circuit. If the circuit is normal, clean the fuel injector. Inspect the spark plug, piston rings, and cylinder. Examine the distributor, the third cylinder's distributor rotor, the third cylinder's spark plug wire, and the third cylinder's spark plug to identify the cause. Advantages of a three-cylinder engine: 1. Compact size and lightweight. If you've ever visited a repair shop, you might have noticed that just two mechanics can easily handle the installation and removal, which undoubtedly makes later maintenance much more convenient. 2. Fewer cylinders mean a relatively smaller displacement, naturally leading to lower fuel consumption and further reducing vehicle operating costs. 3. A turbocharged three-cylinder engine's power output is not inferior to that of a four-cylinder naturally aspirated engine.
2
3
Share

What causes unstable idle speed in a car?

The reasons for unstable idle speed in a car include: 1. Severe carbon buildup in the engine: Carbon buildup in the engine is the main cause of car shaking. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during startup, which can cause sudden stalling. Solution: Clean the fuel system, check the idle speed control valve, and clean the throttle body. 2. Malfunction in the ignition system: Spark plugs are wearable parts and need to be replaced regularly. Solution: Replace the spark plugs. 3. Issues with fuel supply pressure and the intake pressure sensor: If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect or malfunctioning, it can cause the car to shake or even stall. Solution: Inspect and repair the relevant components.
8
0
Share

What is the correct method for adding refrigerant?

There are two methods for adding refrigerant: 1. High-pressure side charging: Charging from the bypass port (multi-purpose channel) of the compressor discharge valve (high-pressure valve) is called high-pressure side charging, and the refrigerant added is in liquid form. It is characterized by safety and speed, and is suitable for the first charging of the refrigeration system, i.e., the system charging after leak detection and vacuuming. However, it must be noted that the compressor must not be turned on during charging (the engine must be stopped), and the refrigerant tank must be inverted. 2. Low-pressure side charging: Charging from the bypass port (multi-purpose channel) of the compressor suction valve (low-pressure valve) is called low-pressure side charging, and the refrigerant added is in gaseous form. It is characterized by slow charging speed and can be used when supplementing refrigerant to the system.
3
5
Share

Which highway is the S7 code for?

Highway S7 code refers to the Huchong Expressway. The Huchong Expressway, formerly known as A13 Highway, Chongming Cross-River West Line, and Riverside Expressway (Phase II). The S7 Expressway starts from the northwest section of Shanghai Outer Ring Expressway and ends at the Chongming section of Hushan Expressway, with a total length of approximately 28.7 kilometers. The principles for naming national expressways are as follows: 1. The naming of national expressway network routes should follow the general rules of highway naming. 2. The names of national expressway network routes are composed by adding a hyphen "-" between the starting and ending place names in the order of the route's start and end points. The abbreviated name of the route is represented by the first Chinese character of the starting and ending place names, or by the abbreviation of the province (city) where the starting and ending points are located. 3. The names and abbreviations of national expressway network routes cannot be repeated. 4. When two or more sections have the same starting and ending points, they are arranged in order from east to west or north to south.
7
1
Share

What to Do When a Motorcycle Won't Start After Sitting for a Long Time?

Check if the motorcycle's switch is turned on. Verify if there is gasoline in the fuel tank. Observe whether the spark plug is igniting normally. If the ignition is unstable, clean the carbon deposits from the spark plug head. Below is more information about spark plugs: 1. The spark plug is a critical component of a motorcycle engine. The normal combustion of the air-fuel mixture is key to the engine's proper operation. First, the type of spark plug used varies by engine, mainly differing in heat range and thread size, so it's essential to use the specified spark plug model. 2. For normal engine combustion, unscrew the spark plug and observe; the electrodes should normally be reddish-brown. If they appear black, indicating carbon deposits, it means the air-fuel mixture is too rich and combustion is incomplete. Clean the carbon deposits using a pointed tool to remove buildup from the central electrode groove and the L-electrode.
3
5
Share

Is Car Coating Effective?

Car paint coating is useful as it plays a certain role in maintaining the car's new appearance. This method can effectively preserve the vehicle's brightness, making it look as shiny as new. Moreover, it helps protect the car from scratches, preventing easy damage. Car paint coating technology applies a protective film to maintain good brightness, but it's not without drawbacks. It is prone to corrosion and requires regular maintenance, typically every six months. Car paint coating is a transparent protective film applied to the car's surface. This film removes the oxidation layer on the paint, forming a transparent inorganic membrane that enhances the paint's brightness, then protects this brightness with the coating. Benefits of car coating: The painted surface becomes bright and smooth, enhancing aesthetics; the coating material is close to inorganic, does not oxidize itself, and increases the paint's oxidation and corrosion resistance; high-quality coating materials can prevent static electricity, preventing chemical dust from adhering to the paint, making it easier to maintain.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.