How many liters of fuel does a Mazda 6 tank hold?

1 Answers
AthenaMarie
07/29/25 6:09pm
Mazda 6 has a fuel tank capacity of 64L, which means it requires 64L to fill it up. Below are some relevant details about the Mazda 6 fuel tank: 1. The fuel tank capacity is a measure of how much fuel a car can hold, and the size of the tank is directly related to the vehicle's fuel consumption. 2. Generally, a full tank can allow the car to travel over 500 kilometers. For example, a car that consumes 10 liters per 100 kilometers usually has a fuel tank capacity of around 60 liters. 3. The actual capacity of the fuel tank is greater than the nominal capacity. According to fuel safety regulations, the standard capacity of a car's fuel tank is set at 95% of the rated capacity by national standards. While a larger fuel tank capacity is beneficial, mastering fuel-saving techniques during daily driving, such as avoiding sudden acceleration and deceleration under safe conditions, can help reduce fuel consumption.
Was this review help?
12
5
Share
More Forum Discussions

How to Permanently Disable the Auto Start-Stop Function in the Sagitar?

The Sagitar does not have a permanent disable button for the start-stop function. To disable it, you need to unplug the start-stop connector from the battery or modify the start-stop voltage threshold using a 5053 diagnostic tool, both of which are relatively professional procedures. To toggle the start-stop function, simply press the auto start-stop button to activate it, and press it again to deactivate it. Here is some relevant information: 1. The so-called auto start-stop technology, in simple terms, refers to a feature where the engine automatically shuts off when the car comes to a temporary stop, such as at a traffic light, and automatically restarts when the car begins to move again. This technology is primarily designed to reduce the idle running time of the engine during stops, thereby lowering fuel consumption. It is worth noting that while auto start-stop saves fuel, it can reduce driving comfort, as the car may start slightly slower and with some vibration compared to normal conditions. If not needed, it can be manually turned off. 2. In short, the auto start-stop technology was developed in response to urban traffic congestion. In city driving, frequent stops are inevitable, and idling not only consumes fuel but also produces emissions that are harmful to the urban environment. With this technology, when the driver presses the brake pedal to stop the car, the system automatically shuts off the engine. Releasing the brake pedal and pressing the accelerator will restart the engine. The benefit of this feature is that it saves fuel and reduces emissions without requiring any changes to the driver's habits.
1
1
Share

What documents are required for driving a car on the road?

Two essential documents are required for driving a car on the road: a driver's license and a motor vehicle license. When driving a motor vehicle on the road, the vehicle's license plate must be displayed, along with the inspection qualification mark and insurance mark, and the motor vehicle license must be carried in the vehicle. Drivers must carry the relevant documents to prepare for inspections by traffic police. The required documents are as follows: 1. Driver's license. The permitted vehicle type on the driver's license must match the vehicle being driven, and the annual review records on the license must meet the requirements. 2. Vehicle license. Carry the vehicle license that matches the license plate of the vehicle being driven. The vehicle license must not be lent, altered, or forged. 3. The driver's ID card. An ID card may be necessary in some situations, so it's best to carry it. 4. Vehicle license plate (or temporary license plate or replacement plate certificate). A license plate should be installed at both the front and rear of the vehicle. For cargo trucks or trailers, the rear panel of the vehicle should display enlarged white characters matching the vehicle's license plate number. The license plate must be appropriately and visibly positioned, with clear characters, and must match the vehicle type and number on the vehicle license. Expired or invalid temporary license plates must not be used. 5. Road maintenance fee certificate. Carry a valid unified road maintenance fee payment certificate or exemption certificate, ensuring that the vehicle type, license plate, unit, and date on the certificate are accurate.
20
1
Share

How to Restore Points After License Deduction?

Points deducted from a driver's license can be restored through the 'Study to Reduce Points' feature on the Traffic Management 12123 app. The specific steps are as follows: The first step is to apply. Open the Traffic Management 12123 app, click on 'Study to Reduce Points' under the education and learning services, select online learning and examination, and then click 'Apply'. The second step is to study. After the application is successful, re-enter the 'Study to Reduce Points' page and click 'Proceed to Study'. The third step is the examination. After completing the study, re-enter the page to proceed to the examination. Passing the exam will restore 1 point. Important Notes: 1. The 'Study to Reduce Points' feature can only add a maximum of 6 points within one scoring cycle. 2. If a driver's license accumulates 12 or more points within one scoring cycle, the 'Study to Reduce Points' feature cannot be used. 3. Online learning must total at least 30 minutes within three days, and each study session must last more than 5 minutes to be valid. 4. To pass the examination, you must answer 18 or more out of 20 questions correctly. Otherwise, you need to take a make-up exam within 24 hours. If you fail the make-up exam twice or do not take it, you must reapply for study and examination.
9
4
Share

Is the Engine of the Besturn X40 the Same as the Volkswagen Bora?

The engine of the Besturn X40 is independently developed by FAW Car Co., Ltd., a subsidiary of China FAW Group, and is a domestically produced engine. The engine model of the Besturn X40 is CA4GB16, with a maximum power of 84kW, a maximum torque of 155 Nm, and a maximum horsepower of 114. For the daily maintenance of the Besturn X40's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These substances mix with metal particles from component wear to form sludge. In small amounts, the sludge remains suspended in the oil, but in large quantities, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
1
2
Share

What engine does the Bora have?

The Bora's engine is produced by the Chengdu FAW factory and developed by the Volkswagen Group. The engine model of the Bora is the EA211. The 1.4T version has a maximum power of 140 kW and a maximum torque of 145 Nm. The 1.5L version has a maximum power of 23 kW and a maximum torque of 250 Nm. For daily maintenance of the Bora's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
4
2
Share

Is it necessary to carry a fire extinguisher in a car?

It is advisable for private cars to carry a fire extinguisher. Highway traffic police generally do not conduct special inspections on whether small vehicles are equipped with car fire extinguishers. However, for vehicles such as buses, tourist vehicles, school buses, and hazardous chemical transport vehicles, there is a focus on checking whether they are equipped with on-board fire extinguishers, warning triangles, and other equipment, and whether the fire extinguishers are expired. Regulations explicitly stipulate that the aforementioned vehicles must be mandatorily equipped with fire extinguishers. Below is extended information on the types of on-board fire extinguishers: 1. Dry powder fire extinguishers operate through chemical suppression, interrupting the chain reaction of combustion. They offer high fire extinguishing levels, comprehensive functionality, rapid extinguishing, and possess electrical insulation properties along with good low-temperature performance, making them particularly suitable for use in factories, warehouses, and outdoor settings. The drawback is that dry powder extinguishing agents are not resistant to re-ignition, and users must undergo specialized technical training. Due to their price advantage, most vehicles are equipped with portable pressurized dry powder fire extinguishers. 2. Carbon dioxide fire extinguishers work by suffocation, reducing the oxygen concentration around the burning material to extinguish the fire. Carbon dioxide, as an extinguishing agent, has excellent insulation properties. However, its disadvantages include a high extinguishing concentration, resulting in low fire extinguishing levels, making it suitable for relatively enclosed spaces; poor resistance to re-ignition; and carbon dioxide being a moderately toxic substance. When the concentration of carbon dioxide in the air reaches 2%, it can cause discomfort. 3. Aqueous film-forming foam (now called water-based) fire extinguishers operate through cooling and isolation, offering high fire extinguishing levels and minimal water damage during use, with neither the secondary pollution of dry powder nor the toxicity of carbon dioxide. Currently, the biggest drawback of domestically produced aqueous film-forming foam extinguishing agents is their poor stability after dilution, making them unsuitable for long-term storage. For a practical extinguishing agent, storage stability is one of its most important performance indicators. Comparatively, the price of aqueous film-forming foam fire extinguishers is also relatively high.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.