How many liters of fuel can a Corolla hold?

2 Answers
JesseRose
09/05/25 2:50am
The fuel tank capacity of the Corolla varies between 43L and 50L depending on the configuration. Below are the steps for refueling a Corolla: 1. Press the left side of the fuel tank cover. 2. Turn the fuel tank cap to the left to remove it. 3. Insert the fuel tank cap in its place. 4. Insert the fuel nozzle into the tank. 5. The first automatic shutoff of the nozzle indicates the tank is full. 6. Do not remove the nozzle immediately; wait for 5 seconds at the fuel filler to allow any remaining fuel to drain into the tank. 7. Replace and tighten the fuel tank cap. Here are some precautions for refueling a Toyota Corolla: 1. To prevent safety hazards, ensure the fuel nozzle is fully inserted into the tank. 2. Tightly close the fuel tank cap to avoid fuel evaporation or, in severe cases, accidents. 3. During refueling, it is recommended that all occupants exit the vehicle. Static electricity is common in winter, so discharge any static before refueling. 4. Turn off all electronic devices during refueling to prevent fires or more serious disasters. 5. Do not smoke, make phone calls, or carry or create open flames while adding fuel to avoid igniting the fuel. 6. If the remaining fuel level is below 1/4, refuel at the nearest gas station as soon as possible to prevent breakdowns.
Was this review help?
1
3
Share
StTanner
09/17/25 3:30am
I've been driving a Corolla for several years, with a fuel tank capacity generally ranging between 43 to 55 liters, averaging around 50 liters depending on the model year and configuration. For instance, gasoline versions typically hold 50 liters, while hybrid models might have slightly larger tanks due to space design considerations. Based on my experience, a full tank can cover 600 to 700 kilometers, which is sufficient for over a week of urban commuting. When refueling, avoid filling the tank completely; wait a few seconds after the pump stops to prevent overflow and potential component damage. Regular maintenance of the fuel tank is crucial to avoid performance issues caused by sediment buildup. If you notice reduced range, check factors affecting fuel consumption like tire pressure or engine condition. While the Corolla is well-designed, variations exist between different versions. In conclusion, sensible refueling practices contribute to cost savings and environmental protection, with safety being the top priority.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Can a New Car Be Driven on the Highway During the Break-in Period?

New cars can absolutely be driven on the highway during the break-in period, as long as other operational guidelines are followed. There is no need to worry about highway driving causing any harm to a new car. Most new cars undergo "cold break-in" before leaving the factory, where the engine is mounted on a specialized machine and run by an electric motor to smooth out any rough edges on the components. Here are some key points to note when driving a new car during the break-in period: 1. Currently, the maximum speed limit on highways is 120 km/h, but the most critical factor during the break-in period is adhering to the engine's RPM limits. 2. Generally, when the speed reaches 120 km/h, the RPM should not exceed 3000. Experienced drivers will notice that even without reaching 3000 RPM, the vehicle can already achieve the highway's maximum speed limit.
8
0
Share

What is a Car Body Kit?

Body kit refers to the external spoiler of a car body. The main functions of a spoiler are as follows: 1. Reduce the reverse airflow generated during car driving while increasing the downforce of the car. 2. Make the car more stable when driving, thereby reducing fuel consumption. 3. It is the most prominent personalized accessory in appearance. The following is an introduction to the types of car body kits: 1. They are divided into two types: bumper type and lip type. 2. The bumper type body kit involves removing the original front and rear bumpers completely and then installing another style of bumper. 3. The lip type body kit adds a half lower lip to the original bumper.
1
1
Share

When is the first maintenance for the Bora?

The first maintenance for the Volkswagen Bora is due at six months or 7,500 kilometers, whichever comes first. Relevant information is introduced as follows: 1. Car maintenance, also known as car servicing, refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. Car maintenance mainly includes servicing the engine system, transmission system, air conditioning system, etc., aiming to keep the car clean, in normal technical condition, and to eliminate potential hazards. 2. The Volkswagen Bora is a model under FAW-Volkswagen, with body dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, and a wheelbase of 2610mm. In terms of appearance, the front face design of the Bora incorporates Volkswagen's design language, integrating continuous lines into the front face design, connecting the headlights with the chrome-plated grille through precise and bold lines. The contour lines of the headlights are precisely matched with the internal styling lines, forming the iconic front face of Volkswagen.
18
5
Share

How often does a car need maintenance?

A car generally requires maintenance every six months. Here are the common maintenance items for a car: 1. Replace engine oil, oil filter, air filter, fuel filter, transmission fluid, cabin air filter, and engine belt. 2. Inspect spark plugs, tires, and the braking system. 3. Top up brake fluid. 4. Clean fuel injectors and throttle body. The benefits of car maintenance include: 1. Keeping the car clean and in good technical condition while eliminating potential hazards. 2. Preventing malfunctions, slowing down wear and tear, and extending the vehicle's service life. 3. Ensuring the car operates at peak performance. 4. Effectively improving vehicle efficiency and reducing part and tire wear.
16
0
Share

What is the ground clearance of the Cruze?

The ground clearance of the Cruze is 130 millimeters. The minimum ground clearance of the Cruze refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Cruze, the better its passability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Chevrolet Cruze is a next-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources. The Cruze has a length of 4666mm, a width of 1807mm, a height of 1460mm, and a wheelbase of 2700mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Cruze is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Cruze's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage.
17
4
Share

What is the difference between 0w30 and 5w30 engine oil?

The differences between 0w30 and 5w30 engine oils are as follows: 0w30 oil has better low-temperature fluidity, and using 0w30 oil can reduce engine noise during cold starts. Relevant information about engine oil grades is provided below: 1. The letter 'w' in the oil grade stands for 'winter,' indicating that the oil is suitable for winter use. If an oil grade contains the letter 'w,' it means the oil can be used normally in winter. 2. The number before 'w' represents the oil's low-temperature fluidity. 0w indicates the oil can flow normally at -35 degrees Celsius, while 5w means the oil can flow normally at -30 degrees Celsius. The number after 'w' represents the oil's viscosity—the higher the number, the greater the viscosity.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.