How many liters of fuel are needed for 100 kilometers?

1 Answers
Terrance
07/30/25 7:35am
To determine the fuel consumption for 100 kilometers, the average fuel consumption value must first be known. Fuel consumption is a comprehensive value influenced by various factors such as the engine, engine displacement, driving habits, road conditions, and more. Below is an introduction to fuel consumption: 1. Instantaneous fuel consumption: This refers to the fuel consumption at a specific moment. When the vehicle is in motion, it is displayed as liters per 100 kilometers, and when stationary, it is displayed as liters per hour. Therefore, instantaneous fuel consumption is highly variable and generally lacks reference value. 2. Average fuel consumption: The commonly referred-to fuel consumption is the average fuel consumption, typically calculated per 100 kilometers, also known as fuel consumption per 100 kilometers. Simply put, it indicates how many liters of fuel the vehicle has consumed over the most recent 100 kilometers. However, there are nuances; for example, many vehicles do not account for the fuel consumed during idling when the engine is running but the vehicle is not moving during this 100-kilometer period.
Was this review help?
15
4
Share
More Forum Discussions

What to do when the RPM is too high during gear shifting in Audi Q5?

The reason for the high RPM during gear shifting in Audi Q5 is mostly due to idle speed control issues, leading to uncontrolled intake system idle speed. You can use a computer to check for any fault codes and perform repairs based on the fault code prompts. The inspection steps include: reading data streams, throttle valve opening, two signal voltages, accelerator pedal opening, and signal voltage. More details about Audi Q5 are as follows: 1. The Audi Q5 is a dynamic and versatile SUV. With its excellent performance and technical advantages, the Michelin Pilot Preceda PP2 high-performance sports tire has recently become the original equipment tire for the premium mid-size SUV Audi Q5. It perfectly combines the body design of a sports sedan, efficient power and responsive handling, the off-road safety performance of an SUV, and the outstanding comfort and flexible interior space of a station wagon. 2. In terms of space, the rear seats of the Audi Q5 are relatively spacious, with adjustable seat cushions. The rear center armrest is of moderate height and average length, and the rear seats are equipped with two sets of child seat interfaces for convenient travel with children. The rear backrest is relatively straight but does not affect seating comfort. 3. In terms of configuration, the Audi Q5 comes in three versions: Premium, Premium Plus, and Prestige. Standard features include leather seats, eight-way power-adjustable front seats, a voice control system, two USB ports, and a stereo system with 10 speakers. 4. The base Premium model also includes a 7-inch infotainment system display, integrating Apple CarPlay, Android Auto, and Bluetooth functions. The Premium Plus model includes a panoramic sunroof, while the Prestige model features an 8.3-inch infotainment display.
17
5
Share

What is the lifespan of a hybrid car battery?

Hybrid car batteries can generally be divided into ternary lithium batteries, lithium iron phosphate batteries, and nickel-metal hydride batteries. The first two types belong to lithium-ion batteries. Ternary lithium batteries have a cycle life of less than 1,000 cycles, while lithium iron phosphate batteries last around 2,000 cycles. When used in hybrid vehicles, they can typically endure about 10 years or 200,000 kilometers under normal conditions without much issue. Nickel-metal hydride batteries have a lifespan of around 500 cycles. Below are some maintenance tips for hybrid cars: 1. Do not leave a hybrid car parked for extended periods: Actually, any car should not be left unused for too long, as it can lead to battery discharge, circuit aging, fuel deposits, and other issues. These problems can cause even greater damage to hybrid cars. Prolonged parking can result in continuous over-discharge of the hybrid battery, damaging the battery pack. 2. Avoid frequent rapid acceleration: Many hybrid car owners choose these vehicles for their fuel efficiency, but some are also drawn to their quick acceleration, smooth power delivery, and low noise. However, despite the fast and smooth acceleration, rapid acceleration can significantly harm the battery. Frequent high-power discharges can reduce the battery's lifespan. 3. Maintain proper ventilation and cooling for the battery pack: Battery performance is highly dependent on environmental temperature. Currently, most hybrid cars rely on internal air intake for cooling, so it is crucial to keep the cooling channels unobstructed. If blocked, the car will issue a warning. Therefore, when purchasing floor mats or when passengers sit in the rear seats, they should be mindful of this.
20
4
Share

Must You Stop in the Left-Turn Waiting Area When Turning Left While Driving?

When the left-turn light is green and you have already crossed the stop line into the waiting area, even if the left-turn signal turns red at this point, you can still make a normal left turn without it being considered a violation. Even stopping is not a violation. However, if you stop and opposing vehicles are already in a state of being allowed to proceed, then making a left turn at this point would be a violation. More details are as follows: 1. The so-called "waiting area" is, as the name suggests, an area for waiting to turn. For example, when preparing to make a left turn, if the left-turn signal is red but the straight signal turns green, you can then enter the waiting area (but you must not go beyond the waiting area indicator line) and wait until the left-turn signal turns green before making the left turn. 2. This method is designed to improve road traffic capacity. Each left-turn signal can allow three to four more vehicles to pass, depending on the size of the waiting area, possibly even more. At intersections with traffic police directing traffic, even if there is no marked waiting area, the traffic police may gesture to direct vehicles preparing to turn left to move forward and wait to turn based on traffic congestion conditions.
7
3
Share

What Causes Weak Crawling in Excavators?

Excavator weakness may be caused by central oil seal leakage leading to pressure loss, or damage to the oil distribution plate. Here are more relevant details: 1. Swing joint leakage: The primary reason for weak crawling is severe leakage in the swing joint. Hydraulic oil must pass through the swing joint to travel from the upper part of the excavator to the lower walking device. If the swing joint leaks or is damaged, some high-pressure oil will flow into the return pipe, resulting in weak crawling and affecting the normal operation of the excavator. Therefore, it is necessary to inspect it to determine if the fault is caused by leakage. 2. Various valve failures: Inspection of control valves is also an essential step. Any malfunction in safety valves, throttle valves, check valves, balance valves, overflow valves, or walking reversing valves can potentially cause crawling issues in excavators. Control valve failures include stuck walking control valve spools, short travel, excessive clearance between the spool and valve bore, and reduced safety valve pressure, all of which can lead to weak right-side crawling.
20
3
Share

Is the BMW X5M equipped with a V8 engine?

BMW X5M is equipped with a V8 engine. Here are the relevant details: 1. The BMW X5M is powered by a 4.4L twin-turbocharged V8 engine, which delivers a maximum power of 423 kW and a maximum torque of 750 Nm. The engine's maximum torque is achieved between 2,200 and 5,000 rpm, while the maximum power is reached between 6,000 and 6,500 rpm. It is paired with an 8-speed automatic transmission (8AT) and features direct fuel injection technology, with an aluminum cylinder head and block. 2. The BMW X5M is a high-performance mid-to-large-sized SUV based on the BMW X5. Its body dimensions are: length 4,880 mm, width 1,985 mm, height 1,754 mm, and a wheelbase of 2,933 mm. It comes standard with a full-time four-wheel-drive system and uses a multi-plate clutch-type central differential.
15
1
Share

How to Scrap and Deregister a Vehicle in a Different Location?

If the vehicle is damaged and cannot be driven back to its original registration location, the owner can directly apply for scrapping at the vehicle's current location (the scrapping process will be carried out by a motor vehicle recycling company). Here is more relevant information: 1. Required documents: The documents to be submitted include: the original identity proof of the vehicle owner (if handled by someone else, the original identity proof of the authorized person and the original power of attorney must also be provided. Non-local residents must also present the original temporary residence permit). 2. Notes: When handling the procedure, all required documents must be brought. At the same time, to avoid causing trouble for yourself, vehicle owners must properly keep all vehicle-related certificates. The procedure is actually very simple, so do not mistakenly trust others and get scammed.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.