···
Log in / Register

How Many Liters of Engine Oil Should Be Changed at One Time?

3 Answers
ThomasLynn
09/02/25 7:49am
Around 3.5 to 5.0 liters. For high-displacement models with a 6-cylinder engine, approximately 6 liters are needed. Below are the functions and classifications of engine oil: Functions of Engine Oil: Engine oil lubricates the engine, reduces friction, assists in cooling, and minimizes buffering. It helps reduce wear on engine components and extends their service life. Classifications of Engine Oil: Engine oils in the market are divided into synthetic oil and mineral oil. The replacement cycle for full synthetic oil is longer than that for semi-synthetic oil and mineral oil. If a car uses synthetic oil, the replacement interval can be about 20,000 kilometers longer than with mineral oil.
Was this review help?
1
1
Share
HectorAnn
09/15/25 3:00am
When I first started driving, I knew nothing about oil changes except that they needed to be done regularly. It wasn't until after a few maintenance sessions that I learned the typical amount is 4 to 6 liters, depending on the car. My compact sedan's manual specifies 4.5 liters, and the technician always adds exactly that amount—no more, no less. Too little oil leads to insufficient lubrication, causing engine parts to wear out from friction and produce strange noises. Too much oil increases pressure, potentially leading to leaks or oil burning. Now, I change the oil every six months and also check the dipstick to ensure the level is between the high and low marks. Thanks to this good habit, my engine runs much smoother. Otherwise, repairs could cost thousands of dollars—definitely not worth it. Paying attention to these small details while driving can save you from big troubles.
Was this review help?
10
2
Share
Expand All
DelJohnny
10/29/25 3:37am
As someone who frequently tinkers with cars, I find that oil capacity varies greatly, with engine size being the main factor. Generally, small-displacement cars like 1.6L models require around 4 liters for an oil change, while larger SUVs or pickup trucks can take up to 6 liters. Don't attempt DIY blindly—always refer to your vehicle manual for precise figures or consult knowledgeable friends. I've also experimented with different oil viscosities; the key is maintaining consistent volume. Too little oil can cause engine overheating and wear—I've seen fellow car enthusiasts experience sudden engine noise increases after underfilling. Too much oil can lead to foaming, compromising lubrication. When changing oil yourself, use the dipstick to check—aim for the level between the high and low marks. This detail affects performance, so don't overlook it.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What are the consequences of running a red light?

According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle in violation of traffic signal regulations results in a penalty of 6 points. Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. According to Article 26 of the 'Road Traffic Safety Law': Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Article 44 states that motor vehicles passing through intersections must comply with traffic signals, signs, markings, or the directions of traffic police. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic lights: arrow traffic lights and circular traffic lights. When arrow lights are present, drivers should first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted; however, if the right-turn arrow is red, right turns are prohibited, and violations will be penalized as running a red light. Brake promptly: When the red light is on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, electronic cameras will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must wait for the green light before proceeding. Check the green light countdown before proceeding: When the green light is flashing, if there is a countdown, use it to judge whether to proceed. If there is no countdown and the vehicle is close to the intersection with sufficient speed, it may proceed to avoid running a red light due to delayed braking. If the speed is low and the vehicle is far from the intersection, brake immediately to stop and avoid running the red light. Article 38 of the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China' states the following for motor vehicle and non-motor vehicle traffic signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians must follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If a violation is captured by surveillance cameras due to yielding, manual review will not record the act as running a red light. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, and even electronic police cannot clearly see the traffic lights. The evidence photos may be blurry, and accidental violations will not be penalized. Emergency situations: Transporting a critically ill patient to the hospital may involve running multiple red lights, quickly exhausting the 12-point limit. After delivering the patient, the driver can present hospital or patient-provided proof to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the gestures of the traffic police.
20
2
Share

What Causes Difficulty in Pressing the Clutch?

Reasons for difficulty in pressing the clutch: the clutch cable is stuck; the release bearing is damaged; there are issues with the clutch master cylinder or slave cylinder. Below is relevant information about the clutch: 1. Concept: The clutch refers to the separation device between the car engine and the transmission, also known as the clutch. 2. Working principle: The driving and driven parts of the clutch transmit torque through friction between contact surfaces, using liquid as a transmission medium (hydraulic coupling), or magnetic transmission (electromagnetic clutch), allowing temporary separation and gradual engagement. The engine's transmission device delivers different speeds to the wheels depending on the vehicle speed.
11
4
Share

What are the requirements for installment car purchase?

Here are the specific requirements for installment car purchase: 1. Age: The borrower must be 18 years old or above and have full civil capacity. 2. Ability to pay the down payment: Have signed a car purchase contract and have the ability to pay the down payment. 3. Good credit: The car loan applicant should have no overdue records or negative credit information in the credit system. 4. Stable income: The car loan applicant must have a stable job and income source to ensure timely repayment. 5. Legal identification: Possess legal identification documents, and some regions or institutions may also require property certificates or collateral.
18
1
Share

Is the 10th-generation Civic CVT equipped with a steel belt or chain?

The 10th-generation Civic CVT uses a chain-type transmission. Details are as follows: 1. Exterior: The new Civic comes in five color options. The front fascia design is more aggressive than before, with a very strong sense of intrusion. The front grille features a glossy black finish. The front bumper design is also very attractive, with large sealed grilles on both sides that can be completely removed to install some cooling systems, offering high playability. The entire front end is very full, with rich layering and a strong visual impact. 2. Powertrain: The Honda Civic is equipped with a 1.5T turbocharged engine, delivering a maximum power of 177 horsepower and a peak torque of 220 Nm.
3
3
Share

What Causes Blue Smoke from Diesel Vehicles?

Reasons for blue smoke from diesel vehicles: 1. Use of unqualified fuel or failure to change diesel for a long time, resulting in overly thin diesel and incomplete combustion; 2. Starting the engine with a large throttle when cold; 3. Poor quality of the mixed gas involved in combustion, or failure to replace aged or damaged filters; 4. Wear of the guide tube and valve during operation, causing excessive clearance between them, which leads to excessive engine oil being sucked into the combustion chamber from the rocker arm chamber during the intake process; 5. The piston ring being stuck in the ring groove due to carbon deposits, losing its elasticity and failing to function properly. If necessary, replace the piston ring or remove it to clean out the carbon deposits.
1
2
Share

What is the difference between power L and T?

Here are the specific differences between power T and L: 1. Power: After the turbo intervention, T has stronger power than L, with an increase of about 40%. Under the same displacement, T can achieve stronger power than L and is more fuel-efficient. 2. Acceleration: T has stronger instant acceleration than L; however, L's entire acceleration process is more linear and smoother. 3. Maintenance cost: T costs more than L. The requirements for gasoline and engine oil are higher for T than for L. 4. Service life: L is stronger than T. Normally, L can be driven until it is scrapped.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.