How many liters of engine oil should be added to the Edge?

2 Answers
Sawyer
07/29/25 3:49am
The recommended amount of engine oil to be added is approximately 5 liters. After adding the oil, you can check the oil level using the dipstick. Since this engine is equipped with a turbocharger, it is necessary to use fully synthetic oil. This is because the turbocharger operates under high temperatures and high-speed conditions, which demand superior lubrication from the oil. More details are as follows: 1. After adding the oil, start the vehicle and then turn it off. Wait for 3 minutes before checking the oil level. This is because when changing the oil, the oil filter also needs to be replaced. The newly installed oil filter initially contains no oil, and the oil will flow into the filter after the vehicle is started. 2. Waiting for 3 minutes allows the oil to flow back into the oil pan, ensuring a more accurate measurement. It is important not to check the oil level on a slope, as the vehicle's tilt will cause the oil in the oil pan to be uneven, leading to an inaccurate reading.
Was this review help?
16
0
Share
McAndrew
08/12/25 7:36am
Please delete this line
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What is the wading depth of the Envision?

The maximum wading depth of the Envision is approximately 300mm. The wading depth of the Envision is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, SUVs and off-road vehicles have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Envision is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct procedures should be followed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
20
4
Share

How to Handle Changes in Driver Information?

To update personal information on a driver's license, you need to file a record at the vehicle management office. The following materials are required: Bring your ID card, household registration certificate issued by the local police station, driver's license, and two passport-sized photos. Go to the vehicle management office where the driver's license was issued to obtain the "Motor Vehicle Driver's License Application Form" and submit it along with the other documents to process the information change. Additional information: 1. Driving school registration time: Registering for a motor vehicle driver's license at a driving school takes about half an hour to complete. Afterward, wait for the driving school's notification for a medical examination. Once the medical examination is completed, you can begin studying for the driver's license theory test (Subject 1). After meeting the required study hours, you can take the exam. Other subjects must be completed in the same order. There is no need to repeat the medical examination within six months. 2. Time to obtain a driver's license: Under normal circumstances, it takes about 45 days to obtain a motor vehicle driver's license, with a maximum time limit of three years. The countdown starts after passing the Subject 1 exam. If this time limit is exceeded, the driver's license exam eligibility will be canceled, and you will no longer be able to take the exam.
14
2
Share

Is Black Smoke from a Diesel Engine a Sign of Insufficient Power?

Black smoke from a diesel engine is related to the diesel fuel itself. Using diesel with the wrong grade, excessive viscosity, or poor quality can make it difficult to ignite, resulting in black smoke emissions. Additionally, this can lead to carbon buildup in the combustion chamber and exhaust muffler, causing the engine to emit black smoke. Precautions for electronically controlled diesel engines: 1. Use the correct grade of engine oil: Electronically controlled common rail engines have higher requirements for oil. It is essential to use CF-grade or higher oil to ensure smooth operation. Moreover, the oil filter should be replaced regularly to maintain oil cleanliness. 2. Replace filter elements periodically: Follow the recommended schedule to replace these filtration devices, ensuring the diesel fuel remains highly clean. Otherwise, if the engine's fuel injection system is damaged, the repair and replacement costs can be substantial. 3. Protect against water, dust, and impacts: Electronically controlled engines incorporate complex electronic systems to precisely manage fuel supply. However, these sensitive electronic systems require specific maintenance. During regular use, ensure the engine's electronic systems are kept away from heat sources and protected from water, dust, and physical impacts.
12
5
Share

Do I Need to Cut Holes for Radar Sensors When Applying Paint Protection Film?

Paint protection film requires holes to be cut for radar sensors. Below is relevant information about paint protection film: 1. Composition: Paint protection film is a thermoplastic polyurethane (TPU) film containing UV-resistant polymers that prevent yellowing and possess exceptional toughness. 2. Product Features: Excellent elongation properties with superior tensile strength; can be applied on any curved surface. Provides over 3 years of anti-yellowing protection and more than 5 years of anti-aging performance. Crystal-clear transparency that blends seamlessly with the original car paint without altering its color; enhances paint gloss by 5%-20%. Protects against damage from petroleum, grease, weak alkalis, gravel, acid rain, and other hazards to the paint surface.
9
5
Share

Location of the Envision's Air Conditioning Drain Outlet?

Envision's sunroof drain holes are located near the sunroof sliding rails and can be seen after fully opening the sunroof. Cars equipped with sunroofs all have sunroof drain holes; without them, the sunroof may leak during rain. Additional information is as follows: 1. Check the tracks: If the sunroof leaks, inspect whether the drain holes are clogged with dust. There are no special maintenance requirements for car sunroofs, just regularly check the surrounding seals for damage and the lubrication condition of the tracks. 2. Other drain holes: Cars also have air conditioning drain holes, engine compartment drain holes, door drain holes, fuel tank drain holes, and exhaust pipe drain holes. 3. Maintenance note: The air conditioning drain hole is designed to discharge water droplets formed by the condensation of surrounding air due to the low temperature during air conditioning use. The location of this drain hole is at the lower part of the heater evaporator, above the front wall panel of the cabin. Regular maintenance should also include checking these drain holes.
17
4
Share

Where is the VIN stamp located on the Skoda Superb?

Skoda Superb's VIN stamp is located near the left support rod in the engine compartment. Purpose of VIN: The Vehicle Identification Number (VIN) is a unique code consisting of seventeen letters or numbers assigned to motor vehicles, used to identify the manufacturer, engine, chassis number, and other specifications of the vehicle. VIN classification: There are two main standards for Vehicle Identification Numbers: the first is the ISO3779 standard adopted by the European Union, and the second standard is primarily used in North America, which is more stringent than the first but remains compatible with it.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.