How many liters of engine oil should be added to a Volvo S90?

What are the differences between the Prado and Land Cruiser?

Toyota Prado and Land Cruiser have the following differences: In terms of appearance: The Land Cruiser is relatively larger in size, appearing more imposing; the front grille of the Toyota Prado is vertical, while the Land Cruiser's is horizontal. In terms of displacement: The Toyota Prado has a relatively lower displacement configuration, while the latter is equipped with stronger features, including functions like chassis lifting. In terms of price: The Toyota Prado is more affordable compared to the Land Cruiser, but the Land Cruiser offers a better configuration experience. 4. In terms of usage: The Toyota Prado is more inclined towards urban SUV use, while the Land Cruiser has performance somewhat similar to a Hummer, truly showcasing its nature when used in military or harsh environments.

2

Share

What is the difference between Rolls-Royce Phantom and Wraith?

The differences between Rolls-Royce Phantom and Wraith are: Different maximum engine horsepower: The Rolls-Royce Phantom has a maximum engine horsepower of 460 hp; the Wraith has a maximum engine horsepower of 632 hp. Different maximum engine torque: The Rolls-Royce Phantom has a maximum engine torque of 900 Nm; the Wraith has a maximum engine torque of 820 Nm. Both the Rolls-Royce Phantom and Wraith have a top speed of 250 km/h, front-engine front-wheel drive, front suspension using double-wishbone independent suspension, rear suspension using multi-link independent suspension, equipped with ABS anti-lock braking system, brake assist, tire pressure monitoring system, electronic stability control, front seatbelt reminder, and lane departure warning system.

11

3

Share

Which has higher fuel consumption, CS55 or CS75?

Manual transmission models of both vehicles have similar fuel consumption, but the CS75 shows slightly higher fuel consumption. The CS55 and CS75 employ different fuel injection technologies: the CS75 uses direct injection technology, providing more power at low RPMs, while the CS55 utilizes multi-point injection technology, though its overall vehicle weight is lighter. Methods to reduce fuel consumption: Properly adjust tire inflation pressure: Maintaining correct tire pressure reduces rolling resistance and lowers fuel consumption. Additionally, slightly overinflating tires by +0.2bar can also save fuel. Moderate use of auxiliary electrical devices: Using certain electrical devices significantly increases fuel consumption, such as the air conditioning system's cooling function. Turn off seat heaters once the desired warmth is achieved. Similarly, deactivate rear window defrosters when there's no fog or ice. Correct gear usage: Match gears to appropriate speeds—avoid high-speed low-gear or low-speed high-gear driving. Shift gears promptly according to speed, and never drive at high speeds in low gears or vice versa.

10

4

Share

What is the fuel consumption of the Chery 3x?

The Tiggo 3x has a fuel consumption of around 8 liters, but actual consumption may vary depending on individual driving skills and habits. Factors affecting fuel consumption are as follows: Bumpy roads increase fuel consumption: Driving on congested or uneven roads in low gear for extended periods will inevitably increase fuel consumption; Using the trunk as storage increases fuel consumption: Loading the trunk with unnecessary items increases the vehicle's weight. It's important to note that vehicle weight is directly proportional to fuel consumption. A 10% reduction in weight can lead to a corresponding percentage decrease in fuel consumption; Incorrect driving habits can double or triple fuel consumption: Improper driving habits have the most significant impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues.

1

3

Share

How to use the Auman GTL fuel-saving switch?

E gear is the economy mode, used when the vehicle is empty or carrying light loads. B gear is the standard mode, used when the vehicle is half-loaded or carrying medium loads. P gear is the power mode, used when the vehicle is fully loaded or climbing slopes. Relevant information about the fuel-saving switch is as follows: Introduction: The fuel-saving switch, also commonly referred to as the multi-state switch or intelligent driving control switch, often uses EBP, LMH, knob 123, or knob 1234 switches. Function: Its main purpose is to help the vehicle save fuel more effectively. Trucks do not always operate under full load; some of the time they run empty.

9

0

Share

What is the fuel tank capacity of the Tiguan?

The fuel tank capacity of the Tiguan is 63 liters, and it requires unleaded gasoline with an octane rating of 92 or higher. Taking the new Volkswagen Tiguan as an example: Dimensions: It is a compact SUV with the following body dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a curb weight of 1600kg. Powertrain: The new Volkswagen Tiguan is equipped with a 1.8T direct-injection 4-cylinder turbocharged engine, delivering a maximum horsepower of 160PS, maximum torque of 250Nm, and maximum power of 118kW. It is paired with a 6-speed automatic transmission.

8

0

Share

How many liters of engine oil should be added to a Volvo S90?

What are the differences between the Prado and Land Cruiser?

What is the difference between Rolls-Royce Phantom and Wraith?

Which has higher fuel consumption, CS55 or CS75?

What is the fuel consumption of the Chery 3x?

How to use the Auman GTL fuel-saving switch?

What is the fuel tank capacity of the Tiguan?

Is There a Difference Between Maintenance at a 4S Shop and Outside?

How to Read the Tire Pressure Markings?

What is the correct way to park an automatic transmission car?

How to Turn Off the Daytime Running Lights on the X-Trail?