How many liters of engine oil should be added to a BMW 1.5T?

1 Answers
Tobias
07/29/25 11:33am
BMW's 1.5T requires 4.5 liters of engine oil. When adding oil, it is essential to ensure that the oil level is between the min and max marks on the dipstick. The oil level must not be below the min mark or above the max mark, as either condition can affect the engine's normal operation. Engine oil is often referred to as the lifeblood of the engine, as it not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat within the engine. The BMW X7 has a body length, width, and height of 5151mm, 2000mm, and 1805mm respectively, with a wheelbase of 3105mm.
Was this review help?
11
0
Share
More Forum Discussions

What Causes Tire Cracking?

Tire cracking is mainly caused by the following two reasons: 1. Traumatic cracking: This type of cracking usually occurs irregularly in terms of location, shape, and size, and is caused by collisions, compression, or scraping against foreign objects while driving. Some cracks only appear on the surface of the rubber, while others may damage the tire's body cords, and in severe cases, can lead to sudden tire deflation. 2. Aging and cracking: This type of cracking generally occurs in the later stages of tire use, commonly seen on the tire shoulders or lower sidewalls, and sometimes at the bottom of the tread grooves. This is a natural change in the tire rubber due to long-term flexing and heat generation. Driving with consistently low tire pressure can accelerate this process, but it usually does not affect the tire's service life or safety performance, and generally does not require early replacement.
2
3
Share

How many kilometers is the break-in period for the Highlander?

The break-in period for the Highlander is 5,000 kilometers. Below is a relevant introduction to the Highlander: 1. Exterior: The Highlander features a stylish and noble appearance with an elegant and imposing presence. Its triangular headlights, hexagonal angular front grille design, integrated Toyota emblem, thick chrome decorations, fog lights embedded with chrome trim, and slightly forward-leaning front styling give the entire front fascia a fashionable and three-dimensional look. 2. Interior: The Highlander's interior design is simple yet elegant, with numerous buttons on the center console but a reasonable layout for easy operation. The craftsmanship is meticulous, with relatively uniform seams, and the interior color scheme exudes a noble and elegant feel. It is well-equipped, and overall, the interior is highly practical.
19
1
Share

Will the Engine Blow Up if the Throttle is Pressed to 6000 RPM?

Normally, pressing the throttle to 6000 RPM will not cause the engine to blow up. Here is more relevant information: Engine blow-up: Due to excessively high temperatures, the piston expands and gets stuck in the cylinder, causing the engine to be scrapped. In severe cases, when the pressure is too high and the piston cannot move, thick flames may shoot out. Causes of engine blow-up: The main reason for an engine blow-up is still related to the quality of the car, which is a design flaw that causes the engine temperature to exceed the maximum temperature the engine can withstand, resulting in an engine blow-up. Poor heat dissipation within the engine or inadequate lubrication due to poor oil circulation, leading to severe cooling issues, can also cause the engine to blow up.
5
2
Share

What Materials Are Needed for Vehicle Inspection?

Vehicle inspection requires an insurance policy, personal identification (if handled by an agent, the agent's identification is also required), and the vehicle's registration certificate for annual inspection. Below is an introduction to vehicle inspection: 1. Annual inspection process: Emissions testing (after passing, obtain the emissions compliance label at the emissions testing hall. If failed, the vehicle needs to be adjusted at a repair shop and retested), vehicle inspection (go to the safety inspection window to collect and fill out the 'Motor Vehicle Regular Inspection Registration Form', which can be obtained with the registration certificate), appearance inspection (take the appearance inspection form to the appearance station to check relevant documents and verify if the compulsory third-party insurance is valid), on-site inspection (the inspection line is responsible for testing brakes, headlights (high beam), chassis, etc.), and labeling. 2. Preparations before annual inspection: Determine where to conduct the inspection, ensure all lights are functional, prepare a fire extinguisher and warning sign, and clear any traffic violations.
5
0
Share

Is there a car with the Song character as its logo?

A car with the Song character in its logo belongs to the BYD brand. Here is some related information about BYD: 1. Brand History: BYD Company Limited was founded in 1995, starting with a team of just over 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. Originally a battery manufacturer, BYD was essentially an "outsider" when it came to making cars. However, by leveraging its strong reputation for "independent intellectual property rights" and the acquisition of Qinchuan Auto, BYD gained a first-mover advantage over other newcomers. 2. Brand Introduction: BYD Auto adheres to a development path of independent research, production, and branding, committed to creating truly affordable and high-quality vehicles for the people. The product designs not only incorporate advanced international trends but also align with the aesthetic values of Chinese culture.
9
5
Share

Does a Flush Machine Damage the Transmission When Changing Oil?

Using a flush machine to change CVT transmission oil does not damage the transmission. Here are the specific details about flush machine oil changes: 1. Advantages: The flush machine utilizes specialized equipment to generate pressure, enabling dynamic replacement of the oil in the transmission's lubrication and cooling lines. This process takes longer, approximately 1 hour, but offers the advantage of more thorough oil replacement, removing over 95% of the old fluid. Additionally, it can clean out sludge and metal particles inside the automatic transmission. With this method, the oil change interval can be extended up to 60,000 kilometers. 2. Disadvantages: The drawback of using a flush machine for transmission oil changes is the increased consumption of transmission fluid, leading to higher costs.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.