How many liters of engine oil should be added to a 2019 Magotan 330?

2 Answers
Hank
07/28/25 7:36pm
19 Magotan 330 requires 5.5 liters of engine oil. The method for adding engine oil is as follows: 1. Lift the vehicle, remove the underbody cover, and place a container with a capacity of about 10 liters below the oil drain plug. 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the oil drain plug after draining and wipe it with a paper towel to check for oil leaks. 3. Reinstall the underbody cover and lower the vehicle, then use a funnel to add engine oil through the oil filler port. The 2019 Magotan 330 is a mid-size sedan with the following dimensions: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, and a curb weight of 1540kg.
Was this review help?
7
4
Share
MacCora
08/12/25 12:36am
I've been driving for over a decade and have some expertise with Volkswagen models. The 2019 Magotan 330 uses a 2.0T engine, and the standard oil change requires approximately 5.2 liters. However, in practice, don't pour it all in at once because some old oil may remain. I usually add 4.8 liters first, start the engine and let it run for a few minutes to circulate the oil evenly, then turn it off and wait a while before pulling out the dipstick, wiping it clean, and checking the oil level. If it's below the min line, slowly top it up without exceeding the max line. I recommend using fully synthetic oil with VW50200 certification, such as 0W-40 or 5W-40 specifications, to ensure proper turbo operation. Too little oil leads to insufficient engine lubrication and increased piston ring wear, while too much increases fuel consumption and may even damage the catalytic converter. Regular oil changes are crucial—every 8,000-10,000 km—don’t skimp on maintenance to save money, as it can extend the engine's lifespan by several years. When doing it yourself, prepare the right tools and never work on a hot engine—safety first. Always refer to the owner's manual and monitor oil levels regularly.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

How to Use Engine Start-Stop Technology and Auto Hold?

When using both the engine start-stop technology and auto hold functions together, pressing the brake pedal firmly will turn off the engine and engage the parking brake. Releasing the brake pedal will maintain this state. To start moving, lightly press the accelerator pedal, which will release the parking state and restart the engine. Then, pressing the accelerator pedal again allows the vehicle to drive. Engine start-stop technology is a system that automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving and automatically restarts the engine when it's time to move forward. The working principle of the start-stop system is: when the vehicle stops due to traffic congestion or at an intersection, and the driver presses the brake pedal to stop and shift to neutral, the system automatically checks: the engine is idling and not in gear; the wheel speed sensors of the anti-lock system show zero; the electronic battery sensor indicates sufficient energy for the next start. When these three conditions are met, the engine automatically stops turning. Auto hold refers to an automatic braking function. After activating this function, for example, when stopping at a red light, it eliminates the need to use the handbrake or electronic parking brake, simplifying operations. For automatic transmission models, it also avoids frequent shifting between D to N or D to P.
13
5
Share

What is the Difference Between Continuously Variable Transmission and Automatic Transmission?

Continuously Variable Transmission and Automatic Transmission differ in their nature: Continuously Variable Transmission, as the name suggests, is a transmission without fixed gear ratios, meaning it has no distinct gear positions. For example, electric motors utilize Continuously Variable Transmission. On the other hand, Automatic Transmission operates with each gear controlled by a set of clutch plates to achieve gear shifting. Automatic transmissions use solenoid valves to control these clutch plates, making the system simpler and more reliable. The transmission primarily refers to the vehicle's gearbox, which is divided into manual and automatic types. Manual transmissions mainly consist of gears and shafts, achieving speed and torque changes through different gear combinations. Automatic Transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque conversion system, and a hydraulic control system, achieving speed and torque changes through hydraulic power transmission and gear combinations.
13
5
Share

What to Do When Your Driver's License Expires in Another Location?

If your driver's license expires in another location, the solution is to renew it locally, but you must have a local residence permit or household registration. According to regulations, motor vehicle drivers should apply for renewal at the vehicle management office of the driver's license issuing location within 90 days before the expiration of the motor vehicle driver's license. The required documents for the application include: 1. The identity proof of the motor vehicle driver; 2. The motor vehicle driver's license; 3. A medical certificate issued by a county-level or above medical institution or a military medical institution at the regimental level or above, proving the physical condition. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority is required.
12
4
Share

What is the phenomenon of car tire rotation?

Car tire rotation is a rotational phenomenon, while the car body exhibits translational motion. The sliding friction between the ground and the tire tread provides a static friction force to the wheel set, and there is sliding friction between the hub and the wheel set. It is incorrect to say that the wheels exhibit translational motion when a car is driving on the road; instead, the wheels exhibit rotational motion, while the movement of the car body belongs to translational motion. Car tires are one of the essential components of a vehicle, directly contacting the road surface and working together with the car suspension to mitigate the impacts encountered during driving. They ensure good ride comfort and smooth driving, maintain excellent adhesion between the wheels and the road surface, improve the car's traction, braking, and off-road capabilities, and bear the weight of the vehicle. The important role that tires play in automobiles is increasingly being recognized by people.
11
0
Share

Where is the fuel tank switch located in a Buick car?

The fuel tank switch in a Buick car is located on the left side of the driver's seat. Pull the fuel filler door release lever upward to release the handle and open the fuel tank cap. The fuel tank is a container used in vehicles such as cars or airplanes to store fuel, and it is a specialized container in the hydraulic system for storing hydraulic oil. In addition to storing gasoline, the fuel tank can also dissipate heat and separate air bubbles from the oil. It can be divided into two types: open fuel tanks and closed fuel tanks. Buick is an automobile brand under General Motors, founded in Detroit, Michigan, USA. Its models include: Buick Apollo, Buick Skylark, Buick Excelle, Buick GL8, Buick LaCrosse, Buick Regal, Buick Royaum, Buick Excelle GT, etc.
1
3
Share

How to switch between D gear and S gear while driving?

You can directly switch between D gear and S gear while driving. Things to note when shifting gears: 1. There is no need to press the brake; 2. You can either release or keep pressing the accelerator; 3. When switching from D gear to S gear, you need to press the gear lock button (the button on the gear lever), but not when switching from S gear to D gear. S gear stands for Sport mode (called Sport mode in many car models). When engaged, the car will shift up later or shift down earlier to keep the engine at higher RPMs, increasing torque output for greater power. In this mode, fuel consumption will increase. The principle of S gear: To obtain better power, it shifts up at higher RPMs to keep the engine at higher speeds, thereby increasing torque output.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.