How many liters of engine oil does the Volvo S60L require?

1 Answers
VonClara
07/29/25 11:07pm
The Volvo S60L requires 3.6 liters of engine oil. Engine oil, also known as engine lubricant, serves multiple functions including lubrication to reduce friction, auxiliary cooling, sealing to prevent leaks, rust and corrosion prevention, as well as shock absorption. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, providing additional performance characteristics, making them an essential part of lubricants. The Volvo S60L is a mid-size sedan based on the Volvo S60 prototype, manufactured at the Chengdu plant in Longquanyi District, Sichuan, China. Compared to the S60, its wheelbase has been extended by 80mm. It features an inline 4-cylinder turbocharged engine, front-wheel drive, a top speed of 220 to 230 km/h, and an acceleration time from 0 to 100 km/h ranging between 6.4 to 8.8 seconds.
Was this review help?
1
5
Share
More Forum Discussions

Can the BMW 5 Series use 98 octane gasoline?

BMW 5 Series can use 98 octane gasoline. Introduction to gasoline: Gasoline is a volatile and flammable hydrocarbon mixture liquid obtained from petroleum through distillation and cracking, which can be used as fuel. Precautions for using gasoline: Gasoline is somewhat toxic, so it should not be sucked by mouth, and it's best to avoid inhaling its fumes. Pay attention to the quality changes of gasoline during long-term storage, especially to prevent it from aging. When driving in high-temperature areas during summer, vapor lock may occur in the car. It is necessary to enhance the cooling and ventilation of the engine, and if necessary, insulation or water dripping measures can be applied to the fuel pump and fuel inlet pipe to reduce temperature.
20
3
Share

Is it necessary to install a car DSP?

It is necessary to install a car DSP. Here is more information about car DSPs: 1. Brief introduction: DSP stands for Digital Signal Processor, which broadly refers to a microprocessor for digital signal processing operations. Car DSPs add electronic frequency division functionality on this basis to achieve active frequency division, and include a 7850 amplifier, transforming it into a digital signal processing device with electronic frequency division. 2. Function: Car DSPs are currently a popular modification method, allowing for quick and cost-effective modifications with dedicated plug-and-play wiring harnesses. Since DSPs come with built-in electronic crossovers, they can achieve active electronic frequency division in crossover modifications.
14
0
Share

Where is the Audi Q2L produced?

Audi Q2L is a domestically produced car. Audi Q2L introduction: Audi Q2L is a domestically produced car, but it is a joint venture model. The Audi Q2L is a compact SUV under the Audi brand. The dimensions of this car are 4236 mm in length, 1785 mm in width, and 1548 mm in height, with a wheelbase of 2628 mm. Audi Q2L powertrain: The Audi Q2L is equipped with a 1.4-liter turbocharged engine across all variants. This 1.4-liter turbocharged engine has a maximum power output of 110 kW and a maximum torque of 250 Nm. The engine reaches its peak power at 5000 to 6000 rpm and its maximum torque at 1750 to 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
17
0
Share

What causes a scooter's throttle to not accelerate smoothly and jerk?

Scooter throttle not accelerating smoothly and jerking is due to a clogged carburetor. Below are the specific functions of the engine throttle: 1. Control carburetor flow: It regulates the airflow into the carburetor to adjust the air-fuel mixture concentration. Typically located at the bottom, the higher the position, the less air enters. When the weather gets colder, the air-fuel mixture concentration decreases, and adjusting it upward can change the mixture concentration, making the vehicle easier to start. 2. Deliver air-fuel mixture and exhaust gases: The valves are divided into intake and exhaust valves. The intake valve's role is to draw the air-fuel mixture into the cylinder for compression and combustion, while the exhaust valve's function is to expel the burned exhaust gases and dissipate heat.
12
3
Share

What does 332t mean?

332T indicates a turbocharged engine with torque between 200-250NM, equipped with a CVT transmission, and the vehicle connectivity version is 2.X. Below is extended information about engine-related content: 1. Energy Conversion: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. 2. Device: The term engine applies both to power-generating devices and to the entire machine including the power unit (e.g., gasoline engines, aircraft engines). The engine was first developed in the UK, so the concept of the engine originates from English, with its original meaning referring to 'mechanical devices that generate power.'
3
1
Share

What is the hand signal for pulling over?

Left arm extended forward and upward at a 135-degree angle to the body, palm facing forward and parallel to the body, fingers closed together; right arm swings horizontally to the left at a 45-degree angle to the body—this swinging motion constitutes the hand signal for pulling over. Below is a detailed introduction to Subject 1 of the driving test: 1. Exam Content: Subject 1 focuses on driving theory fundamentals, road safety laws and regulations, local regulations, and related knowledge, testing the candidate's familiarity and memorization of various basic rules and laws. 2. Exam Difficulty and Pressure: Subject 1 consists solely of multiple-choice questions. Additionally, as it is the first computer-based test, many candidates experience significant pressure. 3. Number of Questions: Subject 1 has a total of 100 questions, each worth one point, with a 10-question error tolerance—a passing score is 90.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.