How many liters of engine oil does the Tiggo 8 require?

3 Answers
ArielDella
07/28/25 9:15am
Tiggo 8 requires 4.7 liters of engine oil. Generally, adding 4 liters is sufficient, as this amount ensures the oil level on the dipstick remains between the minimum and maximum marks. The Tiggo 8 has a body size of 4700 mm in length, 1860 mm in width, and 1746 mm in height, with a wheelbase of 2710 mm. In terms of safety features, this vehicle is equipped with ESC, ABS and EBD, daytime running lights, rear parking sensors and panoramic imaging, hill start assist, and active braking. For power, the Tiggo is paired with a 1.6T turbocharged engine, which is Chery's third-generation engine, delivering a maximum power of 145 kW and a maximum torque of 290 Nm. The transmission system is matched with Getrag's 7-speed wet dual-clutch transmission, paired with a dual-clutch gearbox.
Was this review help?
10
3
Share
EloiseMarie
08/11/25 3:37pm
I've been driving a Chery Tiggo 8 for over three years and I'm quite familiar with oil changes. The Tiggo 8's oil capacity is generally around 4.5 liters, but it depends on your engine model—whether it's the 1.5T turbo or the standard 1.6T, they all fall within this range. I personally use 5W-30 full synthetic oil and change it every 8,000 kilometers, which has worked well for me. Don't overfill or underfill the oil—make sure to drain the old oil completely before adding the full 4.5 liters, and keep the oil level in the middle of the dipstick marks for safety. Too much or too little oil can damage the engine, like shortening its lifespan or increasing fuel consumption. Once, I added a bit too little, and the engine noise got louder, so I topped it up right away. I recommend checking the oil level regularly with the dipstick instead of relying on the warning light. Using the manufacturer-recommended oil brand is a safe bet. When I change the oil, I also clean the air filter for double maintenance, which keeps the car running smoother.
Was this review help?
9
5
Share
Expand All
PenelopeDella
09/28/25 3:45am
I've worked in a repair shop for several years and handled the oil quantity for the Tiggo 8 many times. It takes an average of 4.5 liters of oil, but always refer to the manual when refilling—don't skip this step. I've seen owners casually add just 4 liters, leading to slow engine starts, severe shaking, and even warning lights turning on. When changing the oil, drain the old oil completely, then refill to the standard level, leaving a little room to prevent overflow. I recommend using 5W-30 full synthetic oil for its high-temperature resistance, which suits urban driving conditions. Regular oil changes are crucial—check the oil level every 5,000 km, and inspect immediately if there are signs of leaks. The correct oil quantity protects the engine, saves fuel, and extends the vehicle's lifespan.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Where is the radiator located on the Chery Tiggo 3?

The radiator of the Chery Tiggo 3 is located in the engine compartment. When you open the engine hood, there is a round cap near the body side, which is for adding water, and the connected part is the radiator. The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, achieving temperature regulation. The radiator is an integral part of the car engine. In terms of body dimensions, the Chery Tiggo 3 measures 4420mm in length, 1760mm in width, and 1670mm in height, with a wheelbase of 2510mm.
15
0
Share

How to use the navigation system in Leopaard CS10?

The usage method of Leopaard CS10 navigation system: 1. Open the navigation on the multimedia interface of the central control screen; 2. The GPS will automatically search for the owner's location, and then input the name of the destination. The Leopaard CS10 is a compact SUV under Leopaard Motors, with body dimensions of 4663mm in length, 1875mm in width, and 1700mm in height, and a wheelbase of 2700mm. The Leopaard CS10 is equipped with a 1.5T turbocharged engine, paired with a 5-speed manual transmission, continuously variable transmission, and 6-speed dual-clutch transmission, with maximum horsepower of 150 and 177.
4
1
Share

What Causes the Noise When the Car Just Starts Moving?

This is likely the sound generated by the friction between the brake pads and brake discs, which is a normal occurrence. Detailed explanations are as follows: 1. The braking system of a car consists of the master cylinder, vacuum booster, brake caliper, brake pads, and brake discs. When the brake pedal is pressed, the brake pads clamp onto the brake discs, converting kinetic energy into heat to slow down the vehicle. 2. After pressing the brake pedal, the vacuum booster provides assistance, helping the driver to press the pedal more easily. Upon opening the engine hood, a black metal disc can be seen below the windshield on the driver's side—this is the vacuum booster. 3. In front of the vacuum booster is the master cylinder, which has a reservoir for holding brake fluid. The brake caliper, which contains pistons, serves as the brake slave cylinder.
11
5
Share

How to Decelerate a Manual Transmission Car?

The engine is the power system of a car, transmitting power to the transmission through the clutch, which then delivers the power to the drive wheels to move the car. The correct methods for decelerating and braking a manual transmission car are as follows: 1. When the speed is relatively low, generally within 30km/h, first press the brake, then press the clutch. This prevents the engine from stalling when braking at low speeds. At low speeds, since the wheels are not turning fast enough and the engine primarily provides power, the clutch is needed to separate the engine from the transmission when braking. This allows the engine to keep running even when the wheels stop turning. 2. When the speed is relatively high, i.e., above 30km/h, first press the brake to reduce the speed (to 20-30km/h), then simultaneously press the clutch to bring the car to a stop.
8
0
Share

How Long Can Motor Oil Last After Opening the Cap?

Motor oil can last for about half a year after opening the cap. Beyond this period, the oil may deteriorate, leading to a decline in lubrication performance. Motor oil, engine oil, or engine lubricant is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. Motor oil is used for lubricating internal combustion engines, with its main functions being to reduce friction and wear on moving parts and to remove sludge and varnish from the engine. Methods for preserving motor oil: 1. After maintenance, the remaining oil should be sealed with the cap as soon as possible, preferably sealed with wax; 2. Motor oil is prone to deterioration under light and high temperatures, so the leftover oil should be stored in a cool and dry place to prevent accelerated deterioration; 3. It is recommended to use up the remaining oil within half a year.
7
3
Share

Is the Ferrari F12 rear-wheel drive?

The Ferrari F12 is rear-wheel drive, which is a front-engine, rear-wheel-drive supercar. The Ferrari F12 is equipped with a 6.3-liter V12 naturally aspirated engine, which has a maximum power of 545kW and a maximum torque of 690Nm. The Ferrari 12-cylinder sports car accelerates from 0 to 100km/h in just 3.1 seconds, 0 to 200km/h in 8.5 seconds, and 0 to 300km/h in 21 seconds. The car adopts an aluminum alloy body frame made of various composite materials and utilizes laser welding technology. The car's body dimensions are 4618mm in length, 1942mm in width, and 1273mm in height.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.