···
Log in / Register

How many liters of engine oil does the Q5L require?

5 Answers
LeElliot
07/29/2025, 03:21 PM

q5l requires approximately 4.7 liters of engine oil. Below is relevant information about the Q5L: 1. Positioning: The all-new Audi Q5L was officially launched by FAW-Volkswagen on July 6, 2018, in Anlong, Guizhou. It is the first comprehensively upgraded long-wheelbase premium midsize SUV, with a total of 6 models available, priced between 392,800 and 517,000 yuan. 2. Powertrain: The all-new Audi Q5L features a newly upgraded powertrain combination, equipped with the third-generation EA888 engine (available in two versions: 2.0T high and low power, with the high-power version delivering a maximum power of 185kW and peak torque of 370Nm), a newly developed 7-speed Stronic 'sports car-grade' transmission, and the quattro ultra intelligent all-wheel-drive system.

Was this review help?
10
1
Share
McKaden
08/14/2025, 10:01 AM

Last time I accompanied my friend to get his Audi Q5L serviced, and I watched as the technician added 5.2 liters of engine oil. The technician mentioned that 2.0T engines generally require between 5 to 5.5 liters, depending on how thoroughly the old oil was drained. My friend's car had 30,000 kilometers on it, and the technician added an extra 0.3 liters when replacing the oil filter. Important reminder: don't drive off immediately after adding oil. Start the engine and let it run for five minutes before turning it off, then wait another ten minutes to check the dipstick for an accurate reading. Personally, I always let the dashboard oil level detection run for three minutes after each oil change to be safe, as overfilling can damage the catalytic converter.

Was this review help?
12
4
Share
Expand All
EzraFitz
10/15/2025, 12:48 AM

As someone who frequently works on German cars, the amount of oil to add to the Q5L mainly depends on the engine model. The third-generation EA888 generally requires just over 5 liters. For newer models with GPF, it's best to refer to the manual. I've seen shops pour in a full 5-liter container for convenience, only to find the dipstick showing an overfill. The correct method is to add 4.8 liters first, run the engine for three minutes to circulate the oil, then shut it off and wait ten minutes before topping up gradually based on the electronic dipstick until it shows the middle position. Actually, the maintenance manual is tucked away in the glovebox compartment—pulling it out for reference is the most accurate.

Was this review help?
9
1
Share
Expand All
AndresAnn
11/28/2025, 12:38 AM

Our Q5L just had its maintenance, and the technician said that if the oil is drained completely, adding 5 liters is just right. However, an additional 200ml needs to be topped up each time a new filter is replaced. Remember to ask the mechanic to replace the oil pan screw with a magnetic one. The oil filler port is on the left side of the engine, and using a funnel is recommended to avoid spills. When the engine is cold, the dipstick marks the MAX and MIN lines, and filling to two-thirds between these lines is ideal. It's suggested to check the dipstick every 2,000 kilometers, and if it's found below the MIN line, top up half a liter promptly.

Was this review help?
10
1
Share
Expand All
McEdward
01/18/2026, 02:02 AM

Last year when changing the oil for my Q5L, I noticed a detail: the oil capacity actually varies between different model years. According to the maintenance manual, 5.2 liters was sufficient for pre-2019 models, but post-2020 models require 5.5 liters due to the upgraded particulate filter. I watched the entire oil pouring process closely—the mechanic used a graduated measuring container and added the oil in three stages: first pouring 4 liters to start the engine and let the oil pump circulate, then topping up with 1 liter until the dipstick showed the correct level, and finally adding the last 0.5 liters to finish. The key is to use the manufacturer-recommended 0W-20 grade—mixing with other specifications can damage the engine.

Was this review help?
10
1
Share
Expand All
More Forum Discussions

What are the reasons for the high-pressure oil pump of a diesel engine not delivering oil?

There are several reasons why the high-pressure oil pump of a diesel engine may not deliver oil: 1. Dirty diesel filter: It should be noted that there are three diesel filters. One is located where the oil pipe connects from the fuel tank. There are two more near the fuel tank, on the engine, specifically on the inlet oil pipe. 2. Dirty main pump: The main pump must be calibrated. First, inspect the fuel system to check if the oil path is dirty or clogged. It is best to test whether the fuel pressure is within the standard range. Additionally, check the atomization state of the injectors for any dripping, and inspect the throttle valve for carbon buildup. A dirty throttle valve can also cause poor acceleration. 3. Ignition system: Also, inspect the ignition system for any electrical leakage, and check the intake system for dirt, clogging, or air leaks.
15
5
Share

How to reset the tire pressure warning on Jetta VS5?

There is a storage compartment opposite the front passenger seat. Inside the storage compartment, there is a tire pressure check switch. Start the vehicle and power on the central control screen, then click the button indicated by the red box. Above the tire pressure monitoring switch button, there is a tire pressure monitoring symbol. Find the "Tire" option marked by the red box on the central control screen and click to enter. Click the "SET" button indicated by the red box to proceed to the next setting. Click the "Confirm" button indicated by the red box to proceed to the next setting. Click "Tire Pressure Monitoring Initialization" to reset the tire pressure warning light. Press and hold the tire pressure monitoring button until the warning light on the dashboard turns off.
3
0
Share

What does 'car dealer' mean?

Car dealer refers to used car dealers. The following are specific introductions to purchasing used cars: 1. Prepare the required materials for used car transactions: Before processing the vehicle license for a used car, it is necessary to prepare the relevant materials required for the license application. Prepare all necessary documents for the used car transaction, including the vehicle license, vehicle registration certificate, vehicle purchase tax certificate, road maintenance fee receipt, insurance policy, vehicle and vessel usage tax certificate, and ID card. The used car transaction contract must be supervised by the industrial and commercial department, with both the buyer and seller holding a copy. The contract must be filed with the industrial and commercial department before proceeding with the vehicle modification or transfer procedures. 2. Pay attention to the usage condition: When purchasing a used car, it is important to note the vehicle's usage condition, such as the production date and mileage of the car. The mileage can reflect how long the car has been driven, directly indicating the vehicle's service life.
8
1
Share

What are the reasons why Geely's one-button start fails to ignite?

Geely's one-button start fails to ignite may be due to the steering wheel being locked, the gear not being shifted into P, or the smart key running out of battery. The one-button start device is part of a smart car, a button device that simplifies the starting process and can also shut off the engine. This device can be retrofitted at the original car key lock position or as an independent panel. The following are the functions of the one-button start: 1. Significance: The main significance of the one-button start is convenience, eliminating the need to take out the key after getting in the car—just press the button to start the engine. 2. Functions: The smart system functions of the one-button start include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-button start, one-button shutdown, automatic locking before driving, and automatic unlocking when parking and shutting off the engine.
7
2
Share

How to Use the Lights on Honda XRV?

Here are the instructions for using the lights on Honda XRV: 1. Turn signals and parking lights: Rotate the knob at the top of the light control lever to switch between different lighting modes. 1.1 Left turn signal operation: Push the control lever downward to activate the left turn signal. 1.2 Right turn signal operation: Pull the light control lever upward to activate the right turn signal. A slight tap on the turn signal lever will make the side indicators flash three times before automatically turning off. 2. High beam and high beam flash functions: Move the control lever to the corresponding positions. 2.1 High beam operation: Rotate the top of the light control lever to the low beam position, then push the lever forward to activate the high beam. 2.2 High beam flash function: Also known as high-low beam alternation, pull the light control lever toward the driver once to complete one high-low beam alternation.
15
2
Share

How Many Times Should You Press the Car's One-Button Start to Start the Engine?

Car's one-button start can start the engine with just one press, and its functions include: 1. Multiple start modes; 2. Stable and reliable performance; 3. Smart keyless entry; 4. Dual-mode free switching for smart keys; 5. Smart card backup key; 6. Intelligent silent car wash mode. The one-button start device is part of a smart car, serving as a button device to simplify the starting process and also to turn off the engine. The steps to start a car with one-button start are: 1. Sit in the driver's seat and press the start button, at which point the ACC light turns on, then press again for the vehicle to perform a self-check; 2. Press the brake and press the one-button start to ignite the engine; 3. Release the foot brake; 4. Press the accelerator, shift into drive gear, and release the handbrake; 5. Release the foot brake and press the accelerator to complete the start.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.