How many liters of engine oil does the Mondeo 2.0t require?

What is the Vezel 1.8 Engine?

Vezel 1.8 engine is a 1.8L L4 naturally aspirated engine with the model number R18Z7, delivering a maximum power of 100kW and torque of 169Nm. An engine is a machine that converts one form of energy into mechanical energy. Its function is to transform the chemical energy from the combustion of liquid or gas into thermal energy through burning, and then convert the thermal energy into mechanical energy through expansion to output power. The Vezel is an SUV under GAC Honda. In terms of body dimensions, the Vezel measures 4294mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. Exterior-wise, the Vezel features a winged front face design, with mysterious and elegant black as the base tone, integrating the grille and headlights into one unit, highlighting a pioneering and agile personality.

11

1

Share

Is the gear shifting within 100 meters completed within a hundred meters?

It is required to complete the gear shifting of the motor vehicle within a range of 100 meters. Below is the relevant introduction: Gear shifting within 100 meters: This is to assess the driver's proficiency in mastering the vehicle's gears. The vehicle starts from the 100-meter starting line and completes the acceleration process from the lowest gear to the highest gear within 100 meters, as well as the deceleration process from the highest gear down to the second gear. The intermediate actions should be smooth. Shift up at 5 and down at 0: Shifting up at 5 means shifting to 2nd gear above 15km/h, to 3rd gear above 25km/h, to 4th gear above 35km/h, and to 5th gear above 45km/h; Shifting down at 0 means shifting down to 4th gear below 40km/h, to 3rd gear below 30km/h, to 2nd gear below 20km/h, and to 1st gear below 10km/h.

15

1

Share

Where is the handbrake of Cadillac ATS?

The electronic handbrake is located in front of the driver's left leg. Here are the specific details: Wheelbase: The wheelbase is as long as 2755 mm, with wide front and rear tracks, and adopts a short suspension system and a tire inner ring tightening metal sheet design to further enhance vehicle stability. 17-inch wheels are standard, and 18-inch wheels are optional. Vertical lighting design: The vertical lighting design is adopted, with new iconic LED headlights and door handles with self-illuminating function and active grille design, enhancing the vehicle's sense of technology, fashion and functionality. When driving on the highway at a certain speed, the grille system will actively close to reduce aerodynamic drag and improve fuel economy. Interior design: The interior design uses a lot of advanced technology and exquisite materials, even the position of the pedals and gear lever has been carefully considered. The optional high-performance seats have electric adjustable control function, optimizing the lateral support for the driver in high-speed cornering situations.

9

2

Share

Should You Use High Beams or Low Beams on Highways at Night?

When driving on highways at night, you should use high beams, but switch to low beams when you are close to the vehicle ahead or when meeting oncoming traffic. Due to the high speed of driving, there is a requirement for visibility distance. In a relatively unlit and less crowded nighttime environment, high beams are essential for ensuring adequate visibility. Here are some precautions for driving on highways: 1. Avoid fatigue driving: Fatigue driving is extremely dangerous on highways. Once fatigued, your reaction time decreases, making it difficult to respond correctly to sudden situations. 2. Stay focused: Although driving on highways is relatively smooth, some drivers tend to get distracted, looking around, which is very dangerous. If another vehicle approaches, panic can easily lead to accidents like scratches. 3. Do not drive in the wrong lane: Highways have clearly marked lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a certain lane, return to the appropriate lane promptly after completing the overtaking maneuver. Do not occupy other lanes for extended periods. 4. Maintain a reasonable speed: The increasing incidents of rear-end collisions and rollovers on highways are mainly due to speeding, so do not exceed the speed limit.

18

0

Share

How to Check if a Car Spark Plug is Good?

How to check if a car spark plug is good: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug will have its insulator skirt and electrodes in gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs like blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, with oil creeping up. What are the effects of a bad spark plug: A damaged spark plug can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most notably, difficulty in ignition, affecting the vehicle's normal operation. Severe spark plug erosion, blistering at the top, damage, or melted and eroded electrodes all indicate that the spark plug is ruined and should be replaced.

9

3

Share

What are the main components of an automobile chassis?

An automobile chassis consists of four major systems: the transmission system, the running gear system, the braking system, and the steering system. Below are the detailed descriptions of each: 1. The transmission system generally includes components such as the clutch, gearbox, universal transmission device, final drive, differential, and half-shafts. Its primary function is to transmit the power generated by the engine to the vehicle's driving wheels, creating driving force that enables the car to move at a certain speed. 2. The running gear system is composed of the vehicle's frame, axles, wheels, and suspension. It receives power from the transmission system and generates traction through the interaction between the driving wheels and the road surface, ensuring smooth vehicle operation. It also bears the total weight of the vehicle and the reaction forces from the ground, mitigates impacts from uneven road surfaces on the vehicle body, and works in conjunction with the steering system to ensure driving stability. 3. The braking system is a specialized set of devices designed to forcibly reduce the vehicle's speed. Its main functions include decelerating or stopping a moving vehicle, maintaining a stable speed when driving downhill, and keeping a stationary vehicle from moving. 4. The steering system is a series of devices used to change or maintain the vehicle's direction of travel, whether moving forward or backward. The function of the steering system is to control the vehicle's direction according to the driver's intentions. Given its critical role in driving safety, all components of the steering system are considered safety-critical parts.

5

Share

How many liters of engine oil does the Mondeo 2.0t require?

What is the Vezel 1.8 Engine?

Is the gear shifting within 100 meters completed within a hundred meters?

Where is the handbrake of Cadillac ATS?

Should You Use High Beams or Low Beams on Highways at Night?

How to Check if a Car Spark Plug is Good?

What are the main components of an automobile chassis?

What to Do About Carbon Deposits in Sedans?

Will reversing at a highway fork definitely be captured by cameras?

Can You Stop Midway During Reverse Parking?

What are the reasons for the air conditioning not cooling in the 8th generation Accord?