···
Log in / Register

How many liters of engine oil does the Mercedes GLC300 require?

1 Answers
HaydenAnn
09/04/25 8:33am
The Mercedes GLC has a relatively thick engine oil pan, so it requires approximately 6 liters of engine oil. Performance options: If you prioritize long-lasting oil performance, you can choose Mobil engine oil; if you focus on the cleaning properties of the oil for the engine, you can use Shell lubricants; if you need lubricants with strong oil film toughness, it is recommended to use Castrol. Driving conditions: For frequent driving in congested areas, older vehicles, or long-distance heavy-load transportation, the viscosity of the lubricant can be appropriately increased. Engine type: For naturally aspirated engines, you can choose between mineral oil and semi-synthetic oil. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-quality lubricants with better fluidity, preferably fully synthetic oil.
Was this review help?
6
5
Share
More Forum Discussions

Which BYD model is equipped with a heat pump air conditioner?

BYD's new Tang DMI is equipped with a heat pump air conditioner. The heat pump air conditioner utilizes the solar energy resources stored in the surface soil and water bodies as cold and heat sources, representing a clean and environmentally friendly technology that harnesses renewable resources. Regarding the configuration of the Tang DMI: The new Tang DMI is equipped with the DiLink 4.0 intelligent voice entertainment system, panoramic imaging, the third-generation domain control integration solution, dot-matrix ambient lighting, an electric tailgate, R-EPS power steering, ACC adaptive cruise control, BSD blind spot monitoring, and more. The motor of the Tang DMI: The new Tang DMI is equipped with a P4 electric axle, featuring a permanent magnet synchronous motor on the rear axle, enabling electric four-wheel drive. The most notable feature of the Tang DMI model is its ability to run on both fuel and electricity, while also delivering exceptionally low fuel consumption even when operating in a low battery state.
8
4
Share

Where is the VIN located on the Tank 300?

The VIN (Vehicle Identification Number) of the Tank 300 can be found in the engine compartment, on the left side of the dashboard, or at the lower left corner of the windshield. The VIN is a unique 17-character alphanumeric code that identifies the vehicle's manufacturer, engine, chassis number, and other specifications. Functions of the VIN: Verify the vehicle's identity and accurately identify the vehicle in special circumstances; Check for traffic violations by entering the VIN; Determine if the vehicle is part of a recall by checking the production batch. Meaning of the VIN: The 1st character represents the country or region of production; The 2nd character represents the manufacturer code; The 3rd character represents the vehicle type code; Characters 4 to 8 represent vehicle features; The 9th character is a check digit; The 11th character indicates the assembly plant; Characters 12 to 17 represent the serial number.
12
3
Share

What is Taiwan Benz?

Benz is Mercedes-Benz. Mercedes-Benz is a luxury and high-performance German automobile brand headquartered in Stuttgart, Germany, and is a member of the Daimler company. The passenger car series under Mercedes-Benz include: A-Class, B-Class, C-Class, CL-Class, CLK-Class, CLS-Class, E-Class, S-Class, SL-Class, SLC-Class, SLK-Class, G-Class, GL-Class, GLK-Class, M-Class, R-Class. Below is an introduction to the Mercedes-Benz car series: 1. A-Class: The A-Class of Mercedes-Benz is a mini car series that uses a special sandwich-type chassis design, available in three-door and five-door body styles. 2. B-Class: The B-Class of Mercedes-Benz is a small car-based leisure travel series. 3. C-Class: The C-Class of Mercedes-Benz is a small sedan series, in addition to the standard four-door sedan, the series also has five-door station wagon and three-door hatchback derivatives. 4. GL-Class: The GL-Class of Mercedes-Benz is a large seven-seat luxury leisure off-road series, which debuted in 2006.
10
5
Share

What brand of off-road vehicle is Foro?

Foro is the Ford F150, a four-door, five-seat pickup truck produced by Ford Motor Company, and it is an imported model. Interior of the Ford F150: The new vehicle features an 8-inch full LCD instrument panel, an 8-inch embedded central control screen, and is equipped with automated technological configurations such as automatic emergency braking, pedestrian detection, and automatic headlights. Carbon fiber trim panels are used for details like the instrument panel and air vents. Powertrain of the Ford F150: The new vehicle is powered by a 3.5T EcoBoost twin-turbocharged V6 engine, paired with a 10-speed automatic transmission, delivering a maximum power of 381 horsepower and a peak torque of 672 Newton-meters. The maximum power is achieved at 5500 RPM, with a maximum net power of 280 kW. Exterior of the Ford F150: The front features a large mesh grille with the Ford logo in the center. As for the rear, the taillights are complemented by a dual-exhaust layout on both sides.
8
0
Share

What to Do When Lexus Cannot Add Bluetooth Devices?

If this issue occurs, it is recommended to delete a few Bluetooth devices to enable new additions. Below is relevant information about Lexus: 1. Body Dimensions: The IS is a large sedan under the Lexus brand, with a length, width, and height of 5235 mm, 1900 mm, and 1450 mm respectively, and a wheelbase of 3125 mm. 2. Powertrain: This vehicle utilizes a hybrid system, which includes a 3.5-liter naturally aspirated V6 engine and an electric motor. 3. The 3.5-liter naturally aspirated engine delivers 299 horsepower and a maximum torque of 350 Nm, achieving peak power output at 6600 rpm and maximum torque at 5100 rpm. This engine features hybrid injection technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a total power output of 131 kW and a total torque of 300 Nm. 4. Chassis Design: The front suspension of this vehicle employs a multi-link independent suspension, and the rear suspension also uses a multi-link independent suspension.
3
5
Share

How to Claim Insurance When You Are Fully at Fault in a Rear-End Collision?

When you are fully at fault in a rear-end collision, you should immediately contact your insurance company. In this case, the insurance company will cover the compensation. The claim process for a rear-end collision involving reporting to the police and on-site inspection: If the traffic accident is minor, first report to the police, then notify the insurance company for compensation, or you can directly notify the insurance company for compensation first. If the on-site collision evidence shows no issues, the insurance company can independently determine liability, and the traffic police do not need to handle it on-site. Additionally, the insurance company's on-site investigation staff will analyze and determine the insurance coverage and collect information such as driver's licenses and ID cards. Points to note when handling the issue: For minor traffic accidents involving only external damage, the insurance company's damage assessor can also evaluate the damage on-site and, if it involves three types of damage, make compensation payments on the spot; for more significant traffic accidents, it is necessary to go to an auto repair shop for disassembly to assess the damage and determine replacement items and labor hours; furthermore, the damage assessor must report to higher authorities to verify the reasonableness of the damage costs.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.