How many liters of engine oil does the IZOA need for maintenance?

2 Answers
GenesisLee
07/29/25 12:47am
IZOA maintenance requires 4.5~4.7 liters of engine oil. Replacement: Replace engine oil, oil filter, cabin air filter, and engine air filter. Fluids: Check if all fluids meet specifications. Operational status: Inspect whether lights, chassis, and braking system are functioning properly. Connections: Check and tighten wheel hub nut connections. Adjustments: Adjust idle speed and idle mixture pedal clearance. Torque: Check torque specifications for engine cylinder head bolts. Vehicle maintenance refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment or replacement of certain components as preventive measures. Its purpose is to maintain vehicle cleanliness, ensure proper technical conditions, eliminate potential hazards, prevent failures, slow deterioration processes, and extend service life.
Was this review help?
12
5
Share
SanBrianna
08/12/25 4:59am
I've been driving the IZOA for several years, and during maintenance, the engine oil usually takes about 4 liters, as the engine has a displacement of 1.8L or 2.0L, so this amount is quite stable. Every time I go to the repair shop, the mechanic follows this standard. Too little oil can lead to insufficient lubrication, causing the engine to overheat and wear out quickly, while too much oil can increase pressure, potentially leading to leaks or higher power consumption. I usually make it a habit to check the dipstick—pull it out, wipe it clean, and then check that the oil level is between the min and max marks for safety. Oil quality is also crucial; I opt for synthetic oil for better durability, changing it every 5,000 kilometers to keep the car running smoothly. Don’t forget to replace the oil filter as well to avoid clogging the oil passages. If the car starts making strange noises or fuel consumption increases after long-term use, it might be an oil issue—get it checked early to avoid major repairs.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What is the break-in period mileage for the Tiggo 5x?

The break-in period for a new Tiggo 5x is 3,000 kilometers. Below are specific precautions to take during the break-in period: 1. During the break-in period, avoid emergency braking as much as possible. Emergency braking not only impacts the braking system but also increases the shock load on the chassis and engine. 2. Avoid overloading. Running a new car at full capacity during the break-in period can cause damage to components. To reduce the load on the body and powertrain, choose relatively flat roads to avoid vibration, collision, or emergency braking. 3. Avoid long-distance driving. During the break-in period, long-distance driving increases the continuous working time of the engine, which can easily lead to component wear.
11
2
Share

What does the Great Wall Cannon stationary self-cleaning button mean?

The Great Wall Cannon stationary self-cleaning button refers to the automatic cleaning function, specifically the DPF (Diesel Particulate Filter) self-cleaning feature. It can automatically or manually clean engine carbon deposits based on user needs, aiming to enhance vehicle power, save fuel consumption, and achieve clean and environmentally friendly purposes. Here are specific details about the Great Wall Cannon: 1. Exterior: The new vehicle measures 5437/1958/1893mm in length, width, and height, with a wheelbase of 3230mm. The inner dimensions of the cargo box are 1520/1520/538mm in length, width, and height. 2. Interior: The Great Wall Cannon off-road version features a black and red dual-color scheme, complemented by stitching and diamond-pattern elements. The dashboard is equipped with a large central control LCD screen, paired with rectangular air vents, creating a harmonious and coordinated design.
13
1
Share

How to Replace the Cabin Air Filter on a Mercedes-Benz GLA200?

The cabin air filter is located behind the glove compartment on the passenger side. To replace the cabin air filter, first open the glove compartment lid. Locate the fixing clip on the right side of the glove compartment and pull it outward with force. Then remove the fixing clip on the glove compartment lid to detach it. Press both sides of the glove compartment towards the middle with both hands, and the glove compartment can then be removed. After removing the glove compartment, you will see the cabin air filter cover. Press the fixing clips on both sides of the cover with force to remove the cover. Pull the old cabin air filter outward. Install the new cabin air filter and reassemble everything in the reverse order of disassembly.
15
2
Share

What causes the EPC light to come on and the throttle to not respond?

The reasons for the EPC light coming on and the throttle not responding are as follows: 1. Throttle issue: The throttle position sensor is improperly installed or adjusted, causing the idle switch not to close when the throttle is fully closed, or the idle switch remains closed even when the throttle is partially open. 2. Poor contact: Poor contact of the sliding contact of the linear variable resistor, resulting in intermittent interruption of the throttle position sensor output signal during the process of the throttle moving from fully closed to fully open. 3. Abnormal idle: When the throttle position sensor has the above-mentioned faults, it will affect the engine idle operation (such as excessively high or low idle speed, unstable idle, or easy stalling at idle) or abnormal engine acceleration.
12
2
Share

How to Turn Off the Rear Light of Volkswagen Tayron?

There is a switch on both sides of the rear light; pressing the switch will turn off the rear light. Related details are as follows: 1. The rear interior light of the car can also be turned off from the front. There is a control button on the top of the center console that can control both the front and rear lights. The rear light of the Volkswagen Tayron is installed either on the top of the cabin or above the rear seats. 2. With the continuous development of automotive production technology, the interior reading lights have been replaced with LED light sources. This type of reading light has a relatively long lifespan, generally lasting tens of thousands or even a hundred thousand hours. Another significant advantage is energy efficiency; the illumination intensity of this type of reading light is higher than that of ordinary lights, and it saves at least half the electricity compared to incandescent lights of the same brightness.
9
1
Share

What brand of transmission is used in the VV7?

VV7 uses a 7-speed wet dual-clutch transmission independently developed by Great Wall. This 7-speed wet dual-clutch transmission is the first dual-clutch automatic transmission independently developed by Great Wall. The core part of the dual-clutch system comes from BorgWarner, and its transmission efficiency has increased from 94.41% to 95.6% compared to the previous generation 7DCT. Here is some relevant information: 1. The dual-clutch transmission is developed based on manual transmissions, and its structure is similar to that of a manual transmission. The dual-clutch transmission only adds an extra set of clutches and a shift control mechanism compared to a manual transmission. 2. The dual-clutch transmission is currently a popular transmission, favored by many automakers and consumers. 3. Consumers like this transmission because it can provide a more sporty driving experience. 4. Automakers prefer this transmission because its production and development costs are relatively low, and the equipment used to produce manual transmissions can basically be used to manufacture dual-clutch transmissions.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.