How many liters of engine oil does the BYD Tang require?

[VonEmily]

BYD Tang fuel standard engine oil filling capacity is 5.4L. The following is the method to check the engine oil level for BYD Tang: 1. Turn off the engine and wait for a few minutes to allow the oil to flow back into the oil pan. If this is not done, the engine oil dipstick may not show the actual oil level. 2. Turn the vehicle power to the ON position and check the oil level through the electronic dipstick. If the engine oil is found to be below the MIN mark, unscrew the engine oil filler cap and add engine oil to maintain the oil level at the MAX mark on the dipstick. 3. Wait a few minutes and check the engine oil level again. If necessary, add an appropriate amount of engine oil. The application of the BYD Tang electronic oil dipstick makes it more convenient for owners to check the oil level without having to open the engine hood and pull out the dipstick, avoiding getting their hands dirty with oil sludge.

[McLogan]

A few years ago, I drove a BYD Tang, and I remember the oil change process clearly. The maintenance manual stated around 4.5 liters, and that's exactly how much the mechanic poured each time I went to the repair shop. At first, I didn't understand—adding too little oil made the engine roar loudly, and the ride wasn't smooth. Later, I learned that insufficient lubrication could wear out the engine. The oil change interval was every 5,000 kilometers or six months, and using full synthetic oil made it last longer—don't skimp on oil to save a few bucks. DIY oil changes are pretty straightforward too: prepare an oil funnel and a waste oil container, measure exactly 4.5 liters, and don't exceed the upper limit to avoid abnormal oil pressure. Regular maintenance saves on major repair costs and extends the car's lifespan, making it much more reliable to drive.

[LeHope]

I enjoy tinkering with cars and have changed the oil for my BYD Tang several times. According to the official manual, the specified capacity is 4.5 liters. Before starting, prepare a measuring cup or graduated bucket to ensure accuracy. After draining the old oil, replace the filter and slowly pour in new oil until it reaches the mid-level mark—overfilling can dirty the engine compartment, while too little oil leads to lubrication failure. Using 5W-30 viscosity is suitable for better anti-wear performance. DIY oil changes save over a hundred yuan, but safety comes first—wear gloves to prevent oil stains. The job takes about an hour and helps develop maintenance skills.

[VonZane]

Experience suggests that changing engine oil requires precise measurement, with the BYD Tang's standard being 4.5 liters. Significant deviations are harmful: too much increases pressure leading to oil leaks, while too little causes engine overheating and damage. Regular changes every 5,000 kilometers protect engine health, and using the recommended oil specifications helps avoid malfunctions. Check the dipstick to ensure stable oil levels.