How many liters of engine oil does the ATS require?

1 Answers
VonCarter
07/29/25 10:05am
The ATS requires 4 liters of engine oil. When changing the oil, it is essential to use the same grade of original equipment manufacturer (OEM) oil. Using a different grade may cause oil sedimentation, reduce its effectiveness, and in severe cases, damage the car's engine. The ATS is a sporty mid-size sedan produced by Cadillac, with body dimensions of 4730mm in length, 1824mm in width, and 1426mm in height. In terms of power, the ATS offers three engine options: a 2.0T turbocharged engine, a 2.5L I4 engine, and a 3.6L V6 engine. These engines are paired with either a 6-speed manual or a 6-speed automatic transmission.
Was this review help?
12
4
Share
More Forum Discussions

What is the Energy Density of an Automotive Battery?

The energy density of an automotive battery refers to the amount of electrical energy released per unit volume or mass of the battery. Below is more information about energy density: 1. Introduction: Energy density refers to the amount of energy contained per unit volume, measured in joules per cubic meter. It is used to evaluate batteries and is most suitable for comparing the amount of electricity stored per unit volume. 2. Calculation Method: Battery energy density = battery capacity × discharge platform / battery thickness / battery width / battery length. Generally, under the same volume, the energy density of lithium-ion batteries is 2.5 times that of nickel-cadmium batteries and 1.8 times that of nickel-metal hydride batteries. Therefore, with equal battery capacity, lithium-ion batteries are smaller in volume and lighter in weight compared to nickel-cadmium and nickel-metal hydride batteries.
13
0
Share

Why does the car still show a maintenance reminder after servicing?

This is caused by the maintenance reminder not being reset after the last service. Some cars allow manual reset of the oil life, while others require a computer to perform the reset. Additional information: 1. Maintenance reminder styles: Some cars display a wrench symbol, while others use Chinese characters directly. 2. Oil life calculation methods: Some cars can be set to remind maintenance after a certain mileage, based on the distance traveled. Others cannot set the mileage and simply require pressing the oil reset button to restore the life to 100%. 3. Reminder timing: The computer automatically calculates the oil life based on factors such as driving mileage, driving conditions, and engine operation time. Generally, a reminder is triggered when the oil life falls below 10%. It doesn't necessarily remind you to service after 5000 kilometers; with good road conditions, it might only remind you after 8000 kilometers.
7
2
Share

Does exposing a car to high temperatures have any impact?

Exposing a car to high temperatures can indeed cause problems. The specific issues that may arise from prolonged exposure to heat are as follows: 1. Tires: As the weather gets hotter, the tire pressure of the car increases. This raises the risk of a tire blowout, which is why cars are more prone to blowouts in the summer. The simplest solution is to slightly reduce the tire pressure. The standard tire pressure for most cars is around 2.5. If the tire pressure exceeds this value, combined with hot weather and high-speed driving, the friction will further increase the tire pressure, making blowouts even more likely. When refilling tires in the summer, it's best to do so at noon to minimize the impact of rising temperatures on tire pressure. 2. Paint: The main component of modern car paint is epoxy resin, which has a heat resistance of at least 120°C. Under normal conditions, even with sunlight, the car body temperature won't exceed 100°C. The real damage to the paint comes from ultraviolet (UV) rays in sunlight. Since the resin in the paint is an organic component, it naturally ages over time, and sunlight accelerates this aging process. To mitigate this, you can use a car cover or park the car in a shaded underground parking garage to reduce UV damage to the car's exterior.
4
3
Share

What is the weight of Tesla Model Y?

Tesla Model Y weighs 2003kg. Here is the extended information about Tesla Model Y: 1. Models: Tesla Model Y is a compact SUV developed by Tesla, available in four variants: Standard Range, Long Range, Dual Motor All-Wheel Drive, and Performance. 2. Performance: The Standard Range variant accelerates from 0-96km/h in 5.9 seconds with a top speed of 193km/h; the Long Range Rear-Wheel Drive variant accelerates from 0-96km/h in 5.5 seconds with a top speed of 209km/h; the Dual Motor All-Wheel Drive variant accelerates from 0-96km/h in 4.8 seconds with a top speed of 217km/h; the Dual Motor All-Wheel Drive Performance variant accelerates from 0-96km/h in 3.5 seconds with a top speed of 241km/h.
7
0
Share

How long does it take to pick up the Tank 300 Urban Edition after reservation?

Tank 300 Urban Edition takes 2-3 months for delivery after reservation. Below are the detailed specifications of the Tank 300: 1. Dimensions: The Tank 300 measures 4760mm in length, 1930mm in width, and 1927mm in height, with a wheelbase of 2750mm. 2. Powertrain: The Tank 300 is equipped with a 2.0T direct-injection turbocharged gasoline engine, delivering a maximum power of 167kW and a peak torque of 387N·m. It is paired with a ZF 8-speed automatic transmission (8AT), ensuring superior obstacle-crossing, hill-climbing, and off-road capabilities. 3. Features: The Tank 300 comes with intelligent full-speed ACC cruise control, intelligent lane keeping, the latest 9.3-generation ESP system, intelligent traffic sign recognition, rollover mitigation RMI, OPW front and rear integrated side airbags, CLT dynamic locking dual pretension seatbelts, and more.
8
2
Share

What are the reasons for a car not moving after starting when the accelerator is pressed?

The reasons for a car not moving after starting when the accelerator is pressed are as follows: 1. Fuel system issues: After prolonged use, carbon deposits can accumulate in the fuel injectors, leading to clogging. This may result in fuel line leaks, clogged fuel filters, and other fuel system problems, causing the car to remain stationary after starting. 2. Air intake system issues: The air filter, one of the three filters, requires regular cleaning or replacement. If the air filter becomes clogged or the throttle system is blocked, the air intake volume decreases, leading to incomplete combustion and reduced power. This can cause the car not to move even when the accelerator is pressed after starting. 3. Engine misfire: Power issues are closely related to the engine. If the car shakes at idle or exhibits insufficient power, it may indicate an engine misfire. It is recommended to conduct a comprehensive inspection and maintenance at a professional repair shop.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.