···
Log in / Register

How many liters of engine oil does a 2.0T Highlander require?

4 Answers
OGarrett
07/30/25 12:41am

2.0T Highlander requires approximately 4.6 liters of engine oil. The specific amount should be determined according to the vehicle's instruction manual and the actual remaining oil level in the engine. The 2.0T Highlander is a mid-size SUV under GAC Toyota. Taking the Highlander 2020 2.0T 4WD Million Commemorative Edition as an example, its body dimensions are: length 4890 mm, width 1925 mm, height 1715 mm, with a wheelbase of 2790 mm. The Highlander 2020 2.0T 4WD Million Commemorative Edition is equipped with a 4-cylinder turbocharged engine, paired with a 6-speed automatic transmission.

Was this review help?
7
4
Share
MarianaFitz
08/15/25 5:46am

Regarding the engine oil capacity for the Toyota Highlander 2.0T model, the standard replacement quantity is approximately 5.7 liters. The exact value depends on the engine model and year. It is recommended to prioritize referring to the vehicle manual or service manual for confirmation, as there may be slight variations between different versions such as the 2018 and 2022 models. The type of oil typically used is 5W-30 or 0W-20 full synthetic oil, and the choice should be adjusted based on temperature and driving habits. After adding the oil, it is essential to start the engine and let it run for a few minutes, then turn it off and wait a few minutes before using the dipstick to measure the oil level between the MIN and MAX marks. Overfilling can cause damage to the seals and excessive oil pressure, while insufficient oil can accelerate wear and affect fuel efficiency. Regular oil changes every 5,000-8,000 kilometers are a crucial maintenance step to prevent sludge buildup and maintain engine longevity.

Was this review help?
13
1
Share
Expand All
StLondyn
10/20/25 2:44am

I've used the Toyota Highlander 2.0T version for several years, and I'm accustomed to adding about 5.7 liters of engine oil during each oil change. This figure was sourced from the official manual, making the actual operation straightforward and easy to master. Remember to run the engine briefly after topping up, then check the dipstick to ensure the oil level is correct—avoid overfilling or underfilling. Excessive oil can cause the engine to emit white smoke and even damage components, while too little oil leads to increased noise and higher fuel consumption. It's advisable to change the oil regularly every six months or after driving 8,000 kilometers. If you're doing it yourself, using 5W-30 oil is the safest and most cost-effective choice. Also, inspect the oil filter and oil pan drain plug during the oil change to prevent leaks. These small habits can extend your car's lifespan by several years.

Was this review help?
10
2
Share
Expand All
LeilaAnn
12/03/25 3:16am

The standard oil capacity for the Highlander 2.0T is approximately 5.7 liters, and it's crucial to avoid errors during maintenance. This amount ensures sufficient lubrication for smooth engine operation, reducing friction and noise. Regular oil changes every 5,000 kilometers are advisable, and using the appropriate oil such as 5W-30 can adapt to various temperature changes. Overfilling may cause unstable oil pressure, potentially leading to sensor malfunctions. After daily driving, check the dipstick to ensure the oil level stays between MIN and MAX for optimal performance.

Was this review help?
17
5
Share
Expand All
More Forum Discussions

Does the Alphard belong to GAC or FAW?

The Alphard does not belong to GAC or FAW; it is an imported Toyota vehicle. Taking the 2020 Alphard as an example, its body structure is a 5-door, 7-seater MPV. The dimensions are: length 4975mm, width 1850mm, height 1945mm, wheelbase 3000mm, minimum ground clearance 170mm, fuel tank capacity 58 liters, and curb weight 2270kg. The 2020 Alphard features a front MacPherson independent suspension and a rear double-wishbone independent suspension. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 117PS, maximum power of 86kW, and maximum torque of 198Nm, paired with a continuously variable transmission (CVT).
6
2
Share

What are the precautions for the correct use of airbags?

Correct use of airbags requires attention to the following points: 1. Airbags must be used in conjunction with seat belts; 2. Maintain an appropriate distance from the airbag when seated; 3. Do not place objects in front of, above, or near the airbag; 4. Maintain good driving habits to ensure a certain distance between the chest and the steering wheel; 5. Avoid high temperatures, and store airbag components properly; 6. Do not modify the airbag system or its surrounding layout without authorization; 7. Airbags are single-use products, and each airbag can only be deployed once. Airbags consist of airbag sensors, collision airbags, and electronic control units.
5
0
Share

What is the Electronic Stability Control System?

Electronic Stability Control System is ESC, a system that allows the vehicle to move in the direction desired by the driver. It is typically used when the road surface and rubber are facing downward, and its functions include: improving the vehicle's handling safety coefficient and driving convenience. The method of use is: it automatically turns on after starting the vehicle, and pressing the off button can deactivate it. The Vehicle Stability Control System is a system or program that enhances vehicle handling performance and effectively prevents the vehicle from losing control when it reaches its dynamic limits. It consists of a control unit, steering sensor, wheel sensor, skid sensor, and lateral acceleration sensor. The working principle of the Vehicle Stability Control System is: under the premise of the computer's real-time monitoring of the vehicle's operating status, it intervenes and regulates the engine and braking system.
1
0
Share

When Does the First Car Maintenance Start Counting?

Car first maintenance starts counting from the day the car is picked up. The first car maintenance refers to preventive work that includes inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. The items for the first car maintenance include: 1. Changing the engine oil and oil filter; 2. Checking whether the coolant level of the car is in a normal state; 3. Inspecting the car's brakes and whether there are any scratches on the chassis; 4. Checking if the power steering fluid level is normal and if there are any oil leaks at the oil pipe interfaces; 5. Examining the generator, air conditioning, water pump, and the aging and tightness of the belts; 6. Cleaning the air filter.
1
3
Share

What is the fuel consumption per 100 kilometers for the Audi Q2L?

Audi Q2L's fuel consumption per 100 kilometers is 6.1 liters. Taking the 2021 Audi Q2L as an example, its body dimensions are: length 4236mm, width 1785mm, height 1548mm, wheelbase 2628mm, minimum ground clearance 142mm, fuel tank capacity 50 liters, and the body structure is a 5-door, 5-seat SUV. The 2021 Audi Q2L is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
4
4
Share

How to adjust the audio system in Changan CS75?

To adjust the audio system in Changan CS75, follow these steps: Open the settings on the central control screen, locate the sound effects settings, and adjust the equalizer. The Changan CS75 is a compact 5-door, 5-seat SUV with body dimensions of 4650mm in length, 1850mm in width, and 1715mm in height, with a wheelbase of 2700mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 131 kW and a maximum torque of 265 Nm. The drivetrain is front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.