How many liters of engine oil does a 125cc motorcycle need for an oil change?

What is the M gear?

M gear refers to the manual mode of an automatic transmission or the simulated manual mode of a CVT transmission. When the gear lever is shifted into M gear, gear shifting is manually controlled by the driver. Near the M gear, there are plus or minus symbols, where the plus sign represents upshifting and the minus sign represents downshifting, or gear changes can be made using the paddle shifters on the steering wheel. The purpose of the M gear is to enhance the driving pleasure of the vehicle and provide greater driving freedom. The number of gears in M mode depends on the number of gears in the automatic transmission. The indicated speed (e.g., 7-speed dual-clutch) represents the number of gears, with common automatic transmissions having 6-speed, 7-speed, or 8-speed options.

16

2

Share

What should be paid attention to after a new car reaches 2,000 kilometers?

After a new car reaches 2,000 kilometers, the following should be noted: Conduct a comprehensive inspection before starting: Before setting off, perform a thorough inspection of the vehicle, including checking for oil or water leaks, ensuring the tire pressure is appropriate, verifying that the fuel tank has enough gas to reach the planned refueling point, and confirming the spare tire is in good condition. After starting, drive in second gear at low speed and test the brakes to ensure they are functioning properly. Only proceed to normal driving once everything is confirmed to be in order. Change drivers every two hours: Avoid fatigued driving, as it is one of the main causes of accidents. If you feel tired or drowsy, pull over and take a short break. Do not push yourself to continue driving. Avoid high-speed driving and sudden braking: You may encounter icy or slippery road conditions, so refrain from sudden braking.

10

2

Share

What are the components of the ABS system?

ABS system mainly consists of three parts: sensors, electronic control device and actuator. Its working principle is: the speed sensor detects the wheel speed, and then transmits the wheel speed signal to the microcomputer. The microcomputer controls the slip rate of the wheel by repeatedly reducing or increasing the braking pressure on the wheel according to the input wheel speed, so as to keep the wheel rotating. ABS (Antilocked Braking System) is an automotive safety control system with the advantages of anti-skid and anti-lock. Modern cars are equipped with a large number of anti-lock braking systems. ABS not only has the braking function of ordinary braking system, but also can prevent wheel lock, so that the car can still steer in the braking state, ensure the braking direction stability of the car, prevent side slip and deviation, and is currently the advanced braking device with better braking effect on the car.

11

1

Share

What is the difference between 1.5T and 1.5L engines in cars?

The difference between 1.5T and 1.5L engines in cars lies in the type of engine: the 1.5T uses a 1.5-liter turbocharged engine, while the 1.5L uses a 1.5-liter naturally aspirated engine. Naturally aspirated engines have a simpler working principle, resulting in lower failure rates during use. Turbocharged engines, on the other hand, have a more complex working principle and operate at higher temperatures, which can lead to a slightly higher failure rate compared to naturally aspirated engines. The car engine is the power-generating device of a vehicle, often referred to as the heart of the car, determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric motors for electric vehicles, and hybrid systems, among others.

14

3

Share

Which brand does Venucia belong to?

Venucia belongs to the Venucia brand. The models under Venucia include: Venucia T70, Venucia D60, Venucia T90, and T70X. Taking the Venucia T70 as an example, its exterior dimensions are 4630mm in length, 1845mm in width, and 1653mm in height, with a wheelbase of 2630mm. It is equipped with 1.6L and 2.0L HR16DE and MR20DE engines, along with 6MT and CVT transmissions. The Venucia T70 is the first SUV meticulously crafted by the Dongfeng Venucia brand, featuring a dynamic and energetic exterior upgrade. The stylish matte electric front grille exudes tension, and the headlights have been smoked for a more refined appearance.

17

0

Share

Where are the drainage outlets for the Tiida's sunroof?

The drainage holes for the Tiida's sunroof are typically located inside the vehicle's C-pillars, while the front drainage holes are inside the A-pillars. Generally, cleaning these requires removing the roof lining, so it's recommended to seek assistance from a professional auto repair technician. The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company. In terms of body dimensions, the Tiida measures 4.250 meters in length, 1.695 meters in width, and 1.535 meters in height. The car is equipped with a comprehensive range of safety systems, including ABS anti-lock braking system, EBD electronic brake-force distribution system, BA brake assist system, rear windshield with wiper, and high-mounted brake light as standard active safety features.

19

1

Share

How many liters of engine oil does a 125cc motorcycle need for an oil change?

What is the M gear?

What should be paid attention to after a new car reaches 2,000 kilometers?

What are the components of the ABS system?

What is the difference between 1.5T and 1.5L engines in cars?

Which brand does Venucia belong to?

Where are the drainage outlets for the Tiida's sunroof?

In which year was Audi established?

What are the reasons why the windshield washer fluid of a Geely car cannot be sprayed?

What are the causes of damage to the Mercedes transmission control unit?

Can a driver's license obtained in another city be used normally?