How many liters of engine oil can be added when changing the oil for a BMW X3?

1 Answers
VanLydia
07/30/25 9:46am
When changing the engine oil for a BMW X3, 4.8L of oil needs to be added. Below is a detailed introduction to the engine oil for the BMW X3: 1. There are three types of engine oil for cars: mineral engine oil, semi-synthetic engine oil, and fully synthetic engine oil. Unlike mineral and semi-synthetic engine oils, fully synthetic engine oil is artificially synthesized, offering better performance and a longer usage period. 2. When changing the engine oil, it is not necessary to opt for a higher-grade oil. A higher-grade oil does not necessarily mean it is better for the car; only the suitable oil is the best. 3. When changing the engine oil, the oil filter should also be replaced. The main purpose of replacing the oil filter is to prevent impurities from mixing into the engine oil, ensuring that only filtered oil maintains cleanliness and purity. 4. Good working condition of the engine oil ensures stable engine operation and extends the usage cycle of both the engine oil and the engine.
Was this review help?
2
1
Share
More Forum Discussions

What is the name of the front cover of a car?

The front cover of a car is called the hood, also known as the engine cover, while the cover at the back of the car is called the trunk lid. The functions of the car hood are: 1. Airflow guidance; 2. Protection of the engine and surrounding pipeline components; 3. Assisting driver visibility by effectively adjusting the direction of reflected light; 4. Preventing accidents; 5. Isolating the heat generated during engine operation. If the car hood is stuck and cannot be opened, the solutions are: 1. Lubricate the hood latch spring; 2. Use a tool to pry open the hood, or insert a wire from under the vehicle's engine to the hood's lock hole to pull it open.
5
5
Share

What is the tutorial for removing the manual transmission shift knob?

Manual transmission shift knob removal tutorial: Remove the fixing screw of the shift knob and rotate the knob counterclockwise to detach it. The function of a manual transmission in a car is to manually move the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve shifting. The correct method to start a manual transmission car is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing down or lifting actions to prevent stalling; 8. After holding steady for 3 seconds, slowly release the clutch while lightly pressing the accelerator with the ball of the right foot, then slowly release the accelerator, fully depress the clutch to shift into second gear, and repeat this process to shift into third gear, ensuring a smooth start of the vehicle.
11
1
Share

What Causes Water to Come Out of a Car's Exhaust Pipe?

The reasons for water coming out of a car's exhaust pipe are: 1. After gasoline is completely burned, it forms water and carbon dioxide. Water produces steam at high temperatures, which is colorless and transparent. When the temperature drops below 100 degrees, the steam turns back into water; 2. When the ambient temperature is low, the white smoke emitted from the exhaust pipe is steam, which condenses and accumulates into water droplets. Methods for maintaining the exhaust pipe include: 1. Preventing muffler corrosion: Avoid water entering the muffler during car washing or driving in the rain. If water accidentally enters, start the engine and let it idle for 10 minutes to expel the accumulated water; 2. Preventing muffler discoloration: Clean the muffler surface promptly if it is covered with a large amount of mud or dirt to prevent affecting its heat dissipation.
13
0
Share

Where to Check the National Emission Standard of a Vehicle?

The location to check the national emission standard of a vehicle is: 1. Check the vehicle conformity certificate, which comes with the vehicle when it leaves the factory and clearly states the emission standard; 2. Look for the vehicle inventory list, where the emission standard can be found in the vehicle information section; 3. Examine the conformity certificate, which includes exhaust emissions and specifies the corresponding emission standard; 4. Visit the official vehicle environmental protection website, find the public query platform at the bottom of the homepage, enter the vehicle's VIN code and the last 6 digits of the engine number to check; 5. Inspect the vehicle's environmental protection label, which has a clear mark on the back indicating the vehicle's emission standard, located on the front windshield.
6
1
Share

Why does the Volvo XC60 horn make a squeaking sound?

There are two reasons why the Volvo XC60 horn makes a squeaking sound. Below are the reasons and related information for the Volvo XC60 horn squeaking: Reasons for the Volvo XC60 horn squeaking: The amplifier's output power is relatively small, unable to handle the large dynamic peak signals in music moments; distortion caused by horn overload. Related information: Taking the 2021 Volvo XC60 as an example, it belongs to the mid-size SUV category with body dimensions of length 4688mm, width 1902mm, height 1658mm, and a wheelbase of 2865mm. The 2021 Volvo XC60 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 300Nm, paired with an 8-speed automatic transmission.
6
2
Share

What are the methods for a car to judge distance?

Methods for a car to judge distance include: 1. Judging distance based on rearview mirrors; 2. Using wheel position to judge distance; 3. Judging distance based on parking sensors. The method for judging distance based on rearview mirrors is as follows: 1. When the car image occupies the entire rearview mirror, the distance is 3m; 2. When the car image occupies two-thirds of the rearview mirror, the distance is 5m; 3. When the car image occupies half of the rearview mirror, the distance is 9m; 4. When the car image occupies one-third of the rearview mirror, the distance is 12m. The method for judging distance based on parking sensors is: Determining the distance through sound. Parking sensors emit beeps at a certain frequency, and the frequency increases as the obstacle gets closer. When the beeping frequency becomes faster and is accompanied by a continuous sound, it indicates that the vehicle is getting closer to the obstacle.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.