How many liters of engine oil are needed for Mercedes-Benz R320 maintenance?

1 Answers
AylaLee
07/29/25 11:25am
Mercedes-Benz R320 maintenance requires 6.5 liters of engine oil. According to the replacement cycle: According to the transmission oil replacement cycle, transmission oil has a replacement cycle, generally every 40,000-60,000 kilometers. Manual transmission oil should be replaced every 60,000 kilometers, and automatic transmission oil should be replaced every 40,000-60,000 kilometers. Perform maintenance promptly if issues arise: If you experience increased fuel consumption, slow acceleration, or delayed gear shifting while driving, it is recommended to perform maintenance. Conditions for replacing transmission oil: When the transmission oil contains a lot of iron powder and debris, the lubrication performance of the transmission will significantly decrease, leading to severe wear of the transmission. Generally, vehicles that exceed 100,000 kilometers without maintenance will experience this situation, so replacement is recommended.
Was this review help?
9
3
Share
More Forum Discussions

How long can a National IV vehicle be driven before being scrapped?

National IV vehicles can still be driven for a long time before being scrapped. Here are the specific details: 1. Scrapping period: There are clear regulations in China that do not set a scrapping period for private passenger vehicles, but only stipulate guided scrapping after driving 600,000 kilometers. In addition, the mandatory scrapping period for light trucks and heavy trucks is 10 years, but it can be extended for up to 5 years, meaning the maximum mandatory scrapping period for National IV trucks is 15 years. 2. Regulation time: The National IV standard was first implemented in 2011, and it was fully implemented nationwide in 2013. This means the oldest National IV vehicles are only 8 years old, and there will definitely be a transition period for phasing out National IV vehicles.
6
1
Share

Can You Use High Beams in Tunnels?

Tunnels are not suitable for using high beams. Reasons why high beams should not be used: Due to the significant difference in light levels inside and outside tunnels, drivers' vision is limited. Using high beams in such conditions increases the risk of accidents. Additionally, tunnels are equipped with their own lighting, so high beams are unnecessary, and low beams should be used instead. Low beams should be used in tunnels: In some areas where lighting is available but insufficient, low beams should still be activated. Tunnels fall into this category—despite having lighting, the brightness is often inadequate, necessitating the use of low beams. During heavy fog, snow, or rain when visibility is severely reduced, low beams must also be used even during the day.
16
3
Share

Can I only wash the outside of the car after applying window film?

Applying window film does not affect car washing. You can wash the car immediately after applying the film, but avoid wiping the inside (since the adhesive on the newly applied film hasn't fully set yet, vigorous wiping may cause the film to shift, affecting its appearance). Also, avoid rolling the windows up and down for three days. Other aspects of car washing can proceed normally. Here are the specific pros and cons of car window film: 1. Good privacy: Generally, car window films are one-way, protecting the owner's privacy, but owners need to verify this when choosing the film. 2. Anti-explosion effect: In case of an accident, the film helps keep shattered glass pieces together, preventing them from scattering and protecting passengers. 3. Thermal insulation: High-quality car window films can provide thermal insulation, effectively controlling the rise in interior temperature during summer and retaining heat in winter, creating a comfortable driving environment. 4. Reduced light transmittance: The light transmittance of car window films does not exceed 90%, especially when applied to the windshield, which may reduce visibility and affect driving safety.
7
4
Share

Is the Hongqi H9 an automatic or manual transmission?

Hongqi H9 is an automatic transmission. Here are the specific details about the Hongqi H9: 1. Transmission: The Hongqi H9 is equipped with a 7-speed dual-clutch transmission model DCT400, which is the first mass-produced high-end longitudinal automatic transmission in China. Vehicles with automatic transmissions automatically select the appropriate gear based on driving speed and traffic conditions, eliminating the need for manual gear shifting. Generally, automatic transmission cars have six gear positions: P, R, N, D, S, and L. 2. Versions: The Hongqi H9 comes in two two-tone versions and five single-tone versions. Among them, the two two-tone versions are Akaragon Gentian Purple and Champagne Gold Amber Brown; the five single-tone versions are Legendary Black, Quicksand Gold, Glory Blue, Amber Brown, and Gentian Purple.
15
3
Share

Introduction to Honda Lingpai Gear Positions?

Below is an introduction to the gear positions of the Honda Lingpai: 1. Gear Types: The automatic transmission models of the Honda Lingpai have P, N, R, D/S positions. 2. D Position (Drive): D is the forward gear. Press the brake, hold the side button on the gear lever, and push it backward. 3. S Position (Sport): S is the sport mode, used when more torque is needed. To engage S mode, pull the gear lever further back from the D position. To disengage S mode, pull it back once more (no need to press the brake during this process). 4. N Position (Neutral): N is the neutral gear. Press the side button with your thumb and push the gear lever forward. 5. R Position (Reverse): R is the reverse gear. Hold the side button and continue pushing the gear lever forward. 6. P Position (Park): P is the parking gear. Press and hold the P button on the gear lever. 7. Manual Mode: Based on the D position, push the gear lever sideways to enter manual mode. Move the lever up to shift up and down to shift down.
2
0
Share

Can I drive with a tire pressure of 210?

Tire pressure of 210 is not suitable for driving. A tire pressure of 210 kPa is considered low, as the normal range for tire pressure is between 230 kPa and 250 kPa. Driving with low tire pressure can cause severe wear on the tires, and in serious cases, it may lead to a tire blowout. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Excessive stretching of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more likely to be punctured, leading to internal cracks, bursts, and blowouts. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire shop for repair and then reinflate the tire; If the tire pressure warning appears again after inflation without any visible puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect and replace the wheel rim.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.