How many liters of engine oil are needed for a single maintenance of the VOGE 300r?

2 Answers
RoseLee
07/28/25 4:54pm
The VOGE 300r requires 1.5 liters of engine oil for a single maintenance. Composition of engine oil: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining the basic properties of the lubricating oil, while additives can compensate for and improve the shortcomings of the base oil's performance. Functions of engine oil: The main functions of engine oil are lubrication, cleaning, and heat dissipation. In fact, engine oil is used in many parts of a vehicle, but the oil that needs to be replaced every 5000 kilometers refers to the engine oil. Most people generally use semi-synthetic and fully synthetic engine oils, while conventional engine oil is rarely used. Conventional engine oil is usually used in agricultural machinery, tricycles, and motorcycles. Engine oil replacement intervals: Conventional engine oil: 5000 kilometers, semi-synthetic engine oil: 7500 kilometers, fully synthetic engine oil can go up to 10000 kilometers before the next maintenance.
Was this review help?
14
5
Share
MacEmmett
08/11/25 11:30pm
After reviewing a lot of motorcycle maintenance information, I found that the standard oil change quantity for the VOGE 300R is typically around 1.2 liters, including the additional amount needed when replacing the oil filter. In actual operation, you need to drain the old oil completely before adding new oil, and remember to check the oil level with the dipstick to keep it at the midpoint between the markings. It's recommended to use 10W-40 full synthetic oil, as this viscosity is suitable for seasonal temperature variations. Adding too much oil can increase engine resistance and lead to higher fuel consumption, while adding too little can cause insufficient lubrication and accelerate wear. The engine design is optimized for this specific quantity, so it's advisable to use a graduated measuring cup for precise filling during each maintenance session, rather than estimating. Regular oil changes every 5,000 kilometers or six months can prevent carbon buildup issues and extend engine life, a point that has been repeatedly verified in my repair experience.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

Why Can't I Turn the Key When the Manual Transmission Steering Wheel is Locked?

The steering wheel being locked and the inability to turn the key is most likely due to the activation of the steering wheel's automatic locking function. Specific reasons: The main reason the steering wheel locks is that the steering wheel was turned when the key was removed after the last engine shutdown. At this point, the car's anti-theft system perceives a potential theft risk, prompting the system to lock the steering wheel to prevent vehicle theft. How to handle the locked steering wheel: When encountering a situation where the car's steering wheel is locked and the key can't be turned, there's no need to panic or immediately seek a mechanic. The solution is actually quite simple, as this is not caused by a malfunction. By following the correct steps, the steering wheel can be unlocked. Insert the key, press the brake pedal, turn the steering wheel left and right, and while turning the wheel, twist the key to complete the steering wheel unlocking procedure.
17
1
Share

What are the symbols for low beam and high beam?

The high beam symbol is a horizontal line, while the low beam symbol is a diagonal line pointing downward. The low beam indicator light is green, and the high beam indicator is blue. Low Beam: Low beams are designed for close-range illumination, with a wide coverage angle (160 degrees) but a short projection distance, and the focus cannot be adjusted. The illumination range of low beams is approximately 30-40 meters. Experiments show that when driving at 55 km/h at night, the braking distance after spotting an obstacle is exactly 30 meters. This means that if an object is detected within the low beam's range, there will be no gap between the vehicle and the object by the time the car stops. High Beam: High beams enhance visibility and expand the field of view. On dark roads without streetlights, the visible range with high beams is significantly greater than with low beams alone. Therefore, using high beams in such conditions is highly recommended.
15
2
Share

Can I switch from manual to automatic transmission during the Guangzhou Subject 3 driving test?

In Guangzhou, you cannot switch from manual to automatic transmission during the Subject 3 driving test. Below is relevant information about Subject 3: 1. Introduction to Subject 3: Subject 3, which includes the road driving skills test and the safe civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safe civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Test content for Subject 3: The driving skills test includes preparation before starting, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, parking by the roadside, driving straight through intersections, etc. The safe civilized driving knowledge test covers requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, etc.
16
4
Share

Is the maintenance record query on Che300 accurate?

APP generally provides completely authentic records for queries. Specific situations: Some records might not be displayed, so the query results can only serve as a reference. Visual inspection and instruments are still needed to verify the results. If the car has always been maintained and repaired at a 4S shop, you can check the records in the 4S shop's system. Or if the car has always been serviced at a fixed repair shop, you can check the records there. Maintenance records from any region can be found. Insurance claim status can be checked with the insurance company, but maintenance and repair records not done at a 4S shop cannot be found. Vehicle maintenance records: This refers to an industry document that collects data involving the vehicle's own historical information, including maintenance records, service records, accident records, insurance records, theft records, etc., systematically organizes and analyzes them, and presents them in written form to the party requesting the query.
7
1
Share

Does the Model Y 20-inch wheel hub affect range?

Model Y 20-inch wheel hub does not affect range. Introduction to wheel hubs: A wheel hub is the rotating part of the tire's inner rim connected to the wheel core via spokes, which is the metal component mounted on the axle that supports the tire. It is also called a rim, steel ring, or wheel. Wheel hubs come in various types based on diameter, width, manufacturing method, and material. Types of wheel hubs: Wheel hubs are also called rims. Depending on the characteristics and requirements of different vehicle models, the surface treatment processes for wheel hubs vary, mainly categorized into painting and plating. For ordinary vehicle models, wheel hubs are less considered for appearance, with good heat dissipation being a basic requirement. The process typically involves painting, where the hub is first sprayed and then baked, offering a cost-effective solution with vibrant colors and long-lasting durability. Even when the vehicle is scrapped, the color of the wheel hub remains unchanged.
5
2
Share

Why Should You Lift the Windshield Wipers in Snowy Weather?

Lifting the windshield wipers in snowy weather is to prevent them from freezing to the windshield and damaging the wiper motor, as well as to avoid excessive snow accumulation that could overload the wiper motor. Freezing to the Windshield: During winter snowfalls, temperatures drop significantly, especially for vehicles parked outdoors. Residual moisture near the wipers can freeze overnight, causing the wipers to stick to the glass. If the wipers are frozen and forcibly pulled, it can damage the wiper motor and tear the rubber surface of the wipers. Excessive Snow Accumulation: Heavy snowfall can lead to thick snow buildup on the windshield. The weight of the snow can strain the wiper motor, potentially causing damage. Additionally, if the wipers were in use during snowfall before parking, and the driver forgets to turn them off before shutting down the engine, the wipers may automatically activate upon the next ignition, risking motor damage due to snow obstruction.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.