How many liters of engine oil are needed for a Haval M6 oil change?
2 Answers
Haval M6 requires approximately 4 liters of engine oil for an oil change. The method for changing the engine oil is as follows: 1. Use a jack to lift the vehicle, locate the drain plug and unscrew it to drain the oil; 2. After removing the oil filter, place a container beneath it; 3. Replace with a new oil filter and add new engine oil. The Haval M6 is a compact SUV with body dimensions of: length 4664mm, width 1830mm, height 1729mm, wheelbase 2680mm, fuel tank capacity 55l. It is equipped with a 1.5T turbocharged engine with a maximum power of 110kW and a maximum power speed of 5600 to 6000rpm.
I've had my Haval M6 serviced several times, and an oil change requires about 4.3 liters of oil. I remember last time at the shop, the mechanic first used a lift to raise the car and drain the old oil—it took quite a while to fully drain out. He used 5W-30 semi-synthetic oil; after pouring in a whole bottle, it was still short, so he had to add a small half-bottle more to reach the right level. A reminder: when changing the oil, make sure to replace the oil filter as well—otherwise, it’s a waste to mix new oil with the impurities trapped in the old filter. If you're doing it yourself, remember to let the engine run until warm, then shut it off and wait half an hour before draining—this makes the oil thinner and easier to flow out. For the first three years of a new car, change the oil frequently—every 5,000 kilometers. Once the car gets older, switching to full synthetic oil can extend the interval to 8,000 kilometers. If you notice the dipstick is at the minimum mark, don’t push it—top up the oil right away.
