How many liters of engine oil are needed for a Corolla 1.2t oil change?

Does BMW Antifreeze Need to Be Diluted with Water?

BMW antifreeze needs to be diluted with water, and it can be mixed at a ratio of 1:1. This is because the original BMW antifreeze concentrate is a glycol-based antifreeze with a high ethylene glycol content, accounting for over 90%. When the concentration of ethylene glycol liquid is below 66%, its freezing point decreases as the concentration increases. However, when the concentration exceeds 66%, the freezing point increases with higher concentration. Here are some precautions for using antifreeze: 1. Try to use the same brand of antifreeze. Different brands of antifreeze use different metal corrosion inhibitors, so they should not be mixed. 2. Most antifreeze products have a validity period of two years. When adding antifreeze, ensure the product is within its validity period. When replacing antifreeze, drain the old liquid completely, clean the cooling system thoroughly, and then add the new liquid. 3. Avoid diluting with water. Traditional inorganic antifreeze should not be diluted with water, as it can cause sedimentation and severely impair the antifreeze's normal function. Organic antifreeze can be diluted with water, but the amount of water should not be excessive. 4. For vehicles using antifreeze, never directly add tap water. Instead, use distilled or deionized water. If these are not available, boiled and cooled water is better than tap water. If antifreeze is lost due to leakage, replenish it with the same brand of antifreeze. Antifreeze should be used year-round.

12

1

Share

How to Install the Generator Belt for Cadillac XT5?

First, loosen the generator fixing screw and the belt tension adjustment screw of the Cadillac XT5. Push the generator towards the engine to minimize the distance between the pulleys, then place the belt in position and align it. Finally, adjust the belt tension to the appropriate level and tighten the engine fixing screw and the adjustment screw. Below are the situations when the generator belt needs to be replaced: 1. When inspecting the belt, if you find defects such as core breakage or groove section cracking, it should be replaced immediately. 2. When the belt's cover layer separates from the cord or the cord frays, the belt must be replaced. 3. When the belt is placed on the pulley, there should be a gap between the inner diameter of the belt and the bottom of the pulley groove. If there is no gap, the belt must also be replaced.

2

Share

How to Use Clutch and Brake When Going Downhill?

How to use clutch and brake when going downhill depends on the road conditions: 1. If the slope is very slight and short, you can simply use the brake to control the speed; 2. If the slope is steep and long, you should shift to a lower gear in advance to utilize engine braking for speed control, while also applying the brake to assist in deceleration. More relevant information is as follows: 1. When going downhill, pay attention to checking the braking performance to eliminate potential safety hazards. Before descending, ensure the vehicle enters the downhill section at a controllable speed and shift to an appropriate lower gear based on the slope. 2. Regardless of the slope size, coasting in neutral is not recommended. Properly utilize engine braking to reduce the vehicle's inertial speed. It's advisable to use intermittent braking on downhill sections. If the slope is too long, find a suitable place to stop midway and check the temperature of all four wheels.

6

0

Share

How Early Can You Apply for a Driver's License Renewal?

You can apply for renewal up to three months in advance. The application can be processed at the vehicle management office or the traffic management department of the public security authority, or through the mobile app "Traffic Management 12123." After the renewal is completed, the original driver's license will become invalid, and the new license must be used. More relevant information is as follows: 1. You need to provide the following documents: the driver's ID card, the original driver's license, a physical condition certificate for the driver, and four one-inch bareheaded photos taken within the last six months. The photos must not feature white clothing, and the background color should be white. 2. After the driver's license is renewed, the original license will be invalidated and can no longer be used. Only the new driver's license is valid. The old license should not be discarded carelessly and must be properly stored, as it contains the driver's detailed personal information.

20

3

Share

What is the displacement of the Volkswagen 330?

The displacement of the Volkswagen 330 is 2.0 liters or 1.8 liters. Numbers such as 330 and 380 on the tail badges of Volkswagen vehicles represent the torque data of the corresponding models. Specifically, 330 indicates that the engine's maximum torque is 330N·m. Additional details are as follows: 1. The numbers correspond to torque grades and engines. For example, 330 corresponds to the torque range of 300-350N·m and the 1.8TSI high-power or 2.0TSI low-power engine, while 380 corresponds to the torque range of 350-400N·m and the 2.0TSI high-power engine. 2. The tail badges on Volkswagen vehicles indicate that the peak torque output of the vehicle's engine is close to or equal to the labeled value. A higher number indicates greater peak torque, which usually means a larger engine displacement, a higher vehicle grade, and a higher price.

11

2

Share

What are the causes of abnormal noises in a car?

There are 5 main reasons for abnormal noises in a car: 1. Loose screws on the engine underguard. Tightening or adjusting the screws on the engine underguard is required. 2. Aging engine mount pads. The mount pads support the engine and must be replaced if they are worn out. 3. Loose plastic parts in the engine compartment. This could be due to loose engine covers or intake pipes, which can be fixed by tightening them. 4. Abnormal noises from the engine belt. This includes the power steering belt and alternator belt. Worn-out, too loose, or too tight belts can cause noises, which can be resolved by replacement or adjusting the tension. 5. Use of low-quality engine oil or prolonged intervals between oil changes. This can increase friction between the valves and guides, as well as hydraulic lifters, leading to louder engine noises.

20

0

Share

How many liters of engine oil are needed for a Corolla 1.2t oil change?

Does BMW Antifreeze Need to Be Diluted with Water?

How to Install the Generator Belt for Cadillac XT5?

How to Use Clutch and Brake When Going Downhill?

How Early Can You Apply for a Driver's License Renewal?

What is the displacement of the Volkswagen 330?

What are the causes of abnormal noises in a car?

How to Connect Bluetooth in Chevrolet Cavalier?

Do Snow Tires Require Anti-Slip Chains?

Is the Chevrolet Tracker Equipped with a Three-Cylinder Engine?

What is the normal mileage displayed on the odometer when purchasing a new car?