How many liters of coolant does the Volkswagen EA211 require?

1 Answers
AddysonLee
07/29/25 1:04pm
Replacing the coolant in a Volkswagen EA211 requires 4-5 liters, and it is generally recommended to change it every 2 years or 40,000 kilometers. Method for replacing coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with particular attention to the five-way hose. The five-way hose is named for its five connections to different parts of the car, and the coolant is distributed to various sections of the vehicle after flowing through it. If there is any leakage of coolant in this area, the hose should be replaced or the connections re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add water to the coolant reservoir and continue filling it until clean water flows continuously through the engine cooling system. Then, idle the engine for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint, but continue adding water until the outflow is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels some air, the coolant level will drop. Top it up again until it reaches the "MAXT" mark on the reservoir.
Was this review help?
12
3
Share
More Forum Discussions

How to Use the Navigation System on Jetta VS5's Central Control Screen?

Start the car and power on the system. Click on "Navigation" on the car's LCD screen, and you can directly enter by touching the screen. After the navigation system starts, click on "Search" to enter the selection interface. Enter the address and select it directly from the list, choosing province, city, and county step by step. Alternatively, you can directly input the address to search and match the desired location. After selection, enter the map where you will see two small flag icons or buttons. Click on "Select" to set it as the destination.
5
3
Share

How many cylinders does the BMW i8 have?

i8 is a three-cylinder supercar and also has hybrid models. Below is the relevant introduction: BMW i8: The new BMW i8 is a hybrid-powered two-door supercar. It features a dynamic front bumper and classic radiator grille design, inheriting BMW's consistent family philosophy. Exterior: The position of the rear wheel arches is very close to the doors, and the fuel tank cap is also placed on the wheel arches. In terms of door design, the production model will abandon the concept car's panoramic gull-wing glass doors, opting instead for standard gull-wing doors that are slightly smaller in size compared to the concept car's glass doors.
13
3
Share

How to Connect Bluetooth for 2013 Passat?

Turn on both your phone's Bluetooth and the car's Bluetooth, ensuring they are in discoverable mode. On your phone's Bluetooth interface, click "Search for Devices" to find the car's Bluetooth. Select the car's Bluetooth displayed on your phone, then click on the car's Bluetooth - Bluetooth Settings - Pair. Your phone will then prompt a dialog box asking for a pairing code. Enter the pairing code (usually 1234, 0000, or 1111) and click "Connect". Simultaneously, click "Pair" on the car's Bluetooth interface to complete the pairing successfully.
18
4
Share

How to fold down the rear seats of a Kia K5?

Press the lumbar support switch to adjust the angle of the seat at the lumbar position. The seat position adjustment is located on the door, and the lumbar support adjustment is on the side of the seat. Move the seat position switch forward or backward to adjust the seat position. Lift or press down to raise or lower the seat. Push the backrest switch forward or backward to adjust the tilt angle of the backrest. Pull the handle under the leg rest to extend the leg rest.
3
3
Share

How to Replace the Wiper Blades on a Roewe?

First, fully lift the wiper blade. To avoid damaging the windshield during the removal and installation process, it is recommended to place a cloth on the windshield when handling the wiper blade. Then, adjust the angle of the wiper blade, preferably making it form a 90-degree angle with the wiper arm. Lift the rubber blade to remove it entirely, then pull the rubber blade sideways while pressing firmly downward on the bracket with the other hand to separate the wiper blade from the arm.
11
4
Share

What is the fuel consumption of the ix35?

The Hyundai ix35 has a fuel consumption of 6.8 liters per 100 kilometers. Here is the relevant introduction: Exterior: The ix35 features extremely rich exterior lines, with several arcs and folds outlining the contours of the upper and lower grilles and headlights, giving a sporty atmosphere while revealing a hint of ferocity. Interior: The dynamic and stylish design style of the exterior continues in the interior. The pure black interior color scheme is a favorite among young people, and the classic silver faux-metal accents on the steering wheel and center console enhance the sense of individuality, sportiness, and fashion, making it highly sought after by young consumers.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.