How many liters of coolant does the Swift require?

How to Use a Paint Film Measuring Instrument?

The main methods for using a paint film measuring instrument are as follows: 1. Magnetic Thickness Measurement: Suitable for measuring the thickness of non-magnetic coatings on magnetic substrates, such as steel, silver, and nickel. This method offers high measurement accuracy. 2. Eddy Current Thickness Measurement: Suitable for measuring the thickness of non-conductive coatings on conductive metals. The accuracy of this method is lower than that of the magnetic method. 3. Ultrasonic Thickness Measurement: This method is less commonly used for measuring coating thickness, and only a few manufacturers abroad produce such instruments. 4. Electrolytic Thickness Measurement: This method is not non-destructive, as it requires damaging the coating, and generally offers lower accuracy. 5. Radiometric Thickness Measurement: Instruments using this method are very expensive and are typically used in special applications.

1

2

Share

When to Use the S Gear in Automatic Transmission?

S gear is the sports mode of a car, typically used for climbing slopes and rapid acceleration to overtake. It can also be used during high-speed driving, and the high engine RPM in sports mode can help remove carbon deposits from the engine. The gears in an automatic transmission car include: 1. L gear: This is the low gear, which limits speed. When engaged during uphill driving, it maintains a state of high RPM and low gear. 2. S gear: This is the sports mode, allowing the transmission to shift freely. 3. D gear: This is the drive gear, used for forward motion of the car. 4. N gear: This is the neutral gear, used during brief stops. 5. P gear: This is the parking gear. 6. R gear: This is the reverse gear, used when backing up the car.

19

1

Share

What is the method for removing the rear seats of a Passat?

Here is the method for removing the rear seats of a Passat: 1. The backrest of the Passat rear seat is divided into two parts, left and right, which are separate. There is a bolt lock at the lower outer corner of each side, and a slot fixing at the other corner. First, remove the left rear backrest, then the right rear backrest. 2. Lift the front of the rear seat slightly, then push it backward. 3. If you need to remove the backrest, there are three fixed screws at the very bottom of the backrest, located near both sides and the middle. Use a tool to remove the locked screws, being careful not to remove the seat belt screws. After removing the screws, pull the backrest upward with force.

3

5

Share

What does off-line vehicle mean?

Generally, it refers to the conversion of taxis from commercial to non-commercial use. Below is more information about off-line vehicles: 1. An off-line vehicle is a taxi whose operational vehicle procedures have been converted to non-operational vehicle procedures. Such operational vehicles differ from private cars as they have a service life. According to the 'Mandatory Vehicle Scrapping Standards Regulation', they can still be driven for 8 years. Depending on the vehicle type, medium-sized taxis have a service life of 10 years, while large-sized taxis have a service life of 12 years. 2. For example, if a vehicle is used as a taxi for 3 years and then converted to an off-line vehicle, it can still be used for 5 more years, and so on, but the total must not exceed 8 years. Any registered operational vehicle must comply with the above regulations.

6

0

Share

Where is the switch for the Levin's daytime running lights?

Levin's daytime running lights generally do not have a switch; they automatically turn on when the vehicle starts. Daytime running lights (DRLs) are designed to make the vehicle more visible to others during the day and are installed on both sides of the front end. DRLs are a special type of vehicle light that automatically activates when the car engine is started, regardless of whether it is day or night. After dark, the driver manually turns on the regular headlights, and the DRLs automatically turn off. The following is about the function of daytime running lights: The purpose of daytime running lights is to make the vehicle more easily recognizable during daytime driving. Their function is not to help the driver see the road better but to inform others that a vehicle is approaching.

14

5

Share

Can a temporary ID card be used for the Subject 3 driving test?

Yes, a temporary ID card holds the same legal validity as a permanent one. The temporary ID is valid for three months, so please check its expiration date before use. Here is relevant information: 1. Regulations: Identity proof refers to the resident identity card, which can be either the "Resident Identity Card" or the "Temporary Resident Identity Card". For mainland residents living temporarily away from their permanent residence, the identity proof includes the "Resident Identity Card" or "Temporary Resident Identity Card", along with the residence or temporary residence certificate issued by the public security authorities. 2. Temporary ID card: Apply at the local police station of your permanent residence. Submit your household registration booklet, a recent one-inch black-and-white photo without a hat (the same size standard as for the resident ID card), and pay the certificate fee. For citizens under 16 years old, the application should be made by their guardian.

18

1

Share

How many liters of coolant does the Swift require?

How to Use a Paint Film Measuring Instrument?

When to Use the S Gear in Automatic Transmission?

What is the method for removing the rear seats of a Passat?

What does off-line vehicle mean?

Where is the switch for the Levin's daytime running lights?

Can a temporary ID card be used for the Subject 3 driving test?

What is the correct way to open a car door?

Does the Wildlander have a power tailgate?

Should the AC Be Turned On for Car Air Conditioning Heating?

How to Determine if the Clutch Flywheel is Damaged?