How many liters of antifreeze does the Sportage require?

2 Answers
MaddoxRose
07/24/25 12:15am
The Sportage requires approximately 5 liters of antifreeze. The protective functions of antifreeze for car engines include: 1. Providing anti-corrosion protection for components of the cooling system; 2. Preventing scale formation to avoid reducing the radiator's cooling efficiency; 3. Ensuring the engine operates within the normal temperature range. Engine antifreeze must possess characteristics such as anti-freeze, anti-boil, anti-corrosion, anti-scale, and foam-free properties, unaffected by seasons or regions. Among these, freezing point and boiling point are the fundamental indicators of antifreeze. The Kia Sportage is a compact SUV under Dongfeng Yueda Kia, equipped with numerous high-tech features such as hill-start assist and hill-descent control systems, fully realizing the vehicle's intelligent capabilities.
Was this review help?
7
1
Share
AmirAnn
08/10/25 8:03pm
From an owner's perspective, having driven the Sportage for several years, the coolant capacity is typically around 7 liters, depending on the model year. The manual provides detailed specifications, and regular replacement is crucial. I change it every two years, sticking to the same brand to avoid mixing issues. In northern winters with extreme cold, ensuring sufficient coolant levels prevents engine freeze damage. When topping up myself, I always do it when the engine is cold for safety, being careful not to overfill or underfill to prevent overheating issues while driving.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

Do You Need to Press the Clutch When Lightly Braking in a Manual Transmission Car?

When lightly braking in a manual transmission car, you should press the clutch. The main purpose of pressing the clutch while braking is to prevent the engine from stalling. Here is a related introduction to the function of the clutch: 1. Ensuring a smooth start: To ensure a smooth start, the engine must be started before the car begins to move. When the car starts, it accelerates suddenly from a stationary state. If the transmission system is rigidly connected to the engine, it would be impossible to start normally due to the significant inertia from stationary to moving and the large torque resistance generated by the engine. 2. Ensuring smooth gear shifting: Ensuring smooth gear shifting is another function. As for the claim that it wears out the clutch plate, one must consider the bigger picture. Some people struggle with reversing or parking and avoid using the half-clutch technique, leading to collisions. Repainting and panel beating can be more expensive. A similar example is turning the steering wheel while stationary—beginners are generally advised to know exactly when to switch directions. 3. The role of the clutch: To prevent transmission overload, the car will only start to shake when the clutch is released to a certain extent. At this point, the car needs to be given some throttle to start moving. When the car is in the half-clutch state, it won’t roll back, especially during hill starts. The clutch is also used for gear shifting. Keeping your foot on the clutch for extended periods will shorten the clutch's lifespan.
12
5
Share

Why Must Xenon Lamps Be Replaced After Several Years of Use?

Xenon lamps must be replaced after several years of use because they typically experience light decay within approximately 2 to 4 years, which can compromise driving safety. Therefore, it is advisable to replace xenon lamps soon after signs of light decay appear. The illumination principle of xenon lamps involves a quartz tube filled with xenon gas inside. High-voltage current activates the xenon gas to create an arc light. Xenon lamps have a high color temperature, appearing more white, with their greatest advantage being brightness—up to three times brighter than halogen lamps. The lifespan of xenon lamps is also significantly longer than that of halogen lamps, lasting approximately 2,500 to 3,000 hours. Installation Precautions for Automotive Xenon Headlights: Avoid installing them in areas prone to excessive heat inside the vehicle. Avoid installation near water sources, as excessive moisture can lead to leakage and aging of the ballast. They should be placed in well-ventilated locations to allow air circulation and reduce the temperature of the ballast. The distance between the ballast and the bulb should not be too far to prevent voltage drop in the circuit, which could cause the bulb to fail to light. The high-voltage wire section of the ballast should not be coiled to avoid generating excessive magnetic fields that could interfere with other electrical devices in the vehicle. Replace the original 10A fuse of the headlights with a 15-20A fuse to prevent the original fuse from blowing due to excessive current during startup.
10
2
Share

Where is the crankshaft position sensor located on the Buick GL8?

The crankshaft position sensor on the Buick GL8 is located at the rear right side of the engine, specifically at the junction between the transmission and the engine oil pan. Below is relevant information about the crankshaft position sensor: 1. Function: The primary role of the sensor is to determine the position of the crankshaft, specifically its rotation angle. It typically works in conjunction with the camshaft position sensor to establish the basic ignition timing. 2. Sensor Signal: The engine initiates ignition at the end of the compression stroke. The signals from both the crankshaft position sensor and the camshaft position sensor are used to calculate this timing. The crankshaft position sensor identifies which piston is at top dead center, while the camshaft position sensor determines which piston is in the compression stroke.
4
4
Share

How to Determine How Much to Turn the Steering Wheel?

Steering wheel rotation is generally determined based on the brand logo and horn markings on the steering wheel. The specific judgment methods are as follows: 1. Full turn judgment: After a full turn, the positions of the brand logo and horn remain unchanged. 2. Half-turn judgment: After a half-turn, the brand logo and horn appear upside down from the driver's perspective. Note: The principle of the steering wheel is that the rack-and-pinion gear set is enclosed in a metal tube, with each tooth end of the rack protruding outside the metal tube and connected by tie rods. The pinion is connected to the steering shaft. When the steering wheel is turned, the gear rotates, driving the rack to move. The tie rods at each tooth end of the rack are connected to the steering arm of the steering shaft.
15
4
Share

How to activate the sport mode in the 2019 Buick Excelle?

To activate the sport mode in the 2019 Buick Excelle, press the 'sport' button located on the left side of the multifunction steering wheel. Once the sport mode is activated, the electronic control unit will increase the engine speed to maintain sufficient torque for quick acceleration and deceleration. It will also adjust other vehicle settings, such as stiffening the suspension for better support, enhancing throttle sensitivity, and increasing engine air intake. The 2019 Buick Excelle is a compact sedan under the Buick brand, equipped with a 1.0L turbocharged 3-cylinder engine. It delivers a maximum power of 92kW at 5600rpm and a maximum torque of 170Nm, paired with a 6-speed dual-clutch transmission.
17
3
Share

How to Release Freon in a Car?

To release Freon in a car, follow these steps: 1. Connect the manifold pressure gauge to the compressor and the refrigerant tank. 2. Open the refrigerant tank, loosen the nut on the middle injection hose, and tighten the nut after hearing the sound of refrigerant vapor flowing to expel air from the hose. 3. Open the low-pressure manual valve to allow refrigerant into the cooling system, and close the manual valve when the pressure reaches 0.4 MPa. 4. Start the engine and turn on the air conditioning, setting both the fan speed and temperature to the highest levels. Open the manual valve on the manifold pressure gauge to allow more refrigerant into the cooling system until it reaches the specified value of 1.37 to 1.67 MPa.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.